Abstract
In recent developments in nanoscience and technology, the relationship between material characteristics and size became a significant point. The polymer nanocomposites matrices perspective is the focus of this chapter. This chapter summarizes the synthesis methods, characterization techniques, and applications of polymer nanocomposites matrices. A variety of nanocomposites are also discussed. Moreover, a brief discussion about the experimental results and their interpretations of polymer nanocomposite matrices is presented.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Akita H, Kobayashi H (1999) Studies on molecular composite. III. Nano composites consisting of poly (p-phenylene benzobisthiazole) and thermoplastic polyamide. J Polym Sci B Polym Phys 37:209–218
Alexandre M, Dubois P (2000) Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials. Mater Sci Eng R Rep 28:1–63
Alexandre M, Dubois P, Sun T, Garces JM, Jérôme R (2002) Polyethylene-layered silicate nanocomposites prepared by the polymerization-filling technique: synthesis and mechanical properties. Polymer 43:2123–2132
Bao C, Guo Y, Song L, Hu Y (2011) Poly (vinyl alcohol) nanocomposites based on graphene and graphite oxide: a comparative investigation of property and mechanism. J Mater Chem 21:13942–13950
Burnside SD, Giannelis EP (1995) Synthesis and properties of new poly (dimethylsiloxane) nanocomposites. Chem Mater 7:1597–1600
Camargo PHC, Satyanarayana KG, Wypych F (2009) Nanocomposites: synthesis, structure, properties and new application opportunities. Mater Res 12:1–39
Ceschini L et al (2017) Aluminum and magnesium metal matrix nanocomposites. Springer, Singapore
Cha SI, Kim KT, Arshad SN, Mo CB, Hong SH (2005) Extraordinary strengthening effect of carbon nanotubes in metal-matrix nanocomposites processed by molecular-level mixing. Adv Mater 17:1377–1381
Chang JH, An YU (2002) Nanocomposites of polyurethane with various organoclays: thermomechanical properties, morphology, and gas permeability. J Polym Sci B Polym Phys 40:670–677
Chen F, Ying J, Wang Y, Du S, Liu Z, Huang Q (2016a) Effects of graphene content on the microstructure and properties of copper matrix composites. Carbon 96:836–842
Chen Y et al (2016b) Fabrication of three-dimensional graphene/Cu composite by in-situ CVD and its strengthening mechanism. J Alloys Compd 688:69–76
Cho H, Moon H, Kim M, Nam K, Kim J (2011) Biodegradability and biodegradation rate of poly (caprolactone)-starch blend and poly (butylene succinate) biodegradable polymer under aerobic and anaerobic environment. Waste Manag 31:475–480
Dadkhah M, Saboori A, Fino P (2019) An overview of the recent developments in metal matrix nanocomposites reinforced by graphene. Materials 12:2823
Dieringa H (2011) Properties of magnesium alloys reinforced with nanoparticles and carbon nanotubes: a review. J Mater Sci 46:289–306
Dufresne A (2013) Nanocellulose: a new ageless bionanomaterial. Mater Today 16:220–227
Dwivedi P, Narvi SS, Tewari RP (2013) Application of polymer nanocomposites in the nanomedicine landscape: envisaging strategies to combat implant associated infections. J Appl Biomater Funct Mater 11:129–142
Eskin GI, Eskin DG (2014) Ultrasonic treatment of light alloy melts. CRC Press
Ferreira F, Pinheiro I, Gouveia R, Thim G, Lona L (2018) Functionalized cellulose nanocrystals as reinforcement in biodegradable polymer nanocomposites. Polym Compos 39:E9–E29
Fornes T, Yoon P, Keskkula H, Paul D (2001) Nylon 6 nanocomposites: the effect of matrix molecular weight. Polymer 42:09929–09940
Gangwar J, Gupta BK, Tripathi SK, Srivastava AK (2015) Phase dependent thermal and spectroscopic responses of Al2O3 nanostructures with different morphogenesis. Nanoscale 7:13313–13344
Gilman JW (1999) Flammability and thermal stability studies of polymer layered-silicate (clay) nanocomposites. Appl Clay Sci 15:31–49
Gupta M, Meenashisundaram GK (2015) Insight into designing biocompatible magnesium alloys and composites: processing, mechanical and corrosion characteristics. Springer
Harito C, Bavykin DV, Yuliarto B, Dipojono HK, Walsh FC (2019) Polymer nanocomposites having a high filler content: synthesis, structures, properties, and applications. Nanoscale 11:4653–4682
Huang J-L, Nayak PK (2018) Strengthening alumina ceramic matrix nanocomposites using spark plasma sintering. In: Low IM (ed) Advances in ceramic matrix composites, 2nd edn. Woodhead Publishing, pp 231–247. https://doi.org/10.1016/B978-0-08-102166-8.00010-4
Huang X, Qi X, Boey F, Zhang H (2012) Graphene-based composites. Chem Soc Rev 41:666–686. https://doi.org/10.1039/c1cs15078b
Hussain CM (2020) Handbook of polymer nanocomposites for industrial applications. Elsevier
Jeon C-H et al (2014) Material properties of graphene/aluminum metal matrix composites fabricated by friction stir processing. Int J Precis Eng Manuf 15:1235–1239
Jordan J, Jacob KI, Tannenbaum R, Sharaf MA, Jasiuk I (2005) Experimental trends in polymer nanocomposites – a review. Mater Sci Eng A 393:1–11. https://doi.org/10.1016/j.msea.2004.09.044
Jose T, George SC, Thomas S (2020) Polymer nanocomposite membranes for pervaporation: an introduction. Polymer nanocomposite membranes for pervaporation:1
Khan WS, Hamadneh NN, Khan WA (2016) Polymer nanocomposites–synthesis techniques, classification and properties. In: Science and applications of tailored nanostructures. One Central Press (OCP), p 50
Khani M, Ezatpour H, Ebrahimi G (2018) Mechanical and microstructure properties of Al/CNT-Al2O3 hybrid nanocomposite produced by accumulative roll bonding process. Modares Mech Eng 17:56–64
Kim DJ, Jo MJ, Nam SY (2015) A review of polymer–nanocomposite electrolyte membranes for fuel cell application. J Ind Eng Chem 21:36–52
Komarneni S (1992) Nanocomposites. J Mater Chem 2:1219–1230
Lee K-Y, Aitomäki Y, Berglund LA, Oksman K, Bismarck A (2014) On the use of nanocellulose as reinforcement in polymer matrix composites. Compos Sci Technol 105:15–27
Li S, Meng Lin M, Toprak MS, Kim DK, Muhammed M (2010) Nanocomposites of polymer and inorganic nanoparticles for optical and magnetic applications. Nano Rev 1:5214
Liu L, Qi Z, Zhu X (1999) Studies on nylon 6/clay nanocomposites by melt-intercalation process. J Appl Polym Sci 71:1133–1138
Loste J, Lopez-Cuesta J-M, Billon L, Garay H, Save M (2019) Transparent polymer nanocomposites: an overview on their synthesis and advanced properties. Prog Polym Sci 89:133–158
Luan J, Wang S, Hu Z, Zhang L (2012) Synthesis techniques, properties and applications of polymer nanocomposites. Curr Org Synth 9:114–136
Lyapina M, Cekova M, Krasteva A, Dencheva M, Yaneva-Deliverska M, Kisselova A (2016) Physical properties of nanocomposites in relation to their advantages. J IMAB Annu Proc Sci Paper 22:1056–1062
Malaki M, Xu W, Kasar AK, Menezes PL, Dieringa H, Varma RS, Gupta M (2019) Advanced metal matrix nanocomposites. Metals 9:330
Mandal A, Chakrabarty D (2014) Studies on the mechanical, thermal, morphological and barrier properties of nanocomposites based on poly (vinyl alcohol) and nanocellulose from sugarcane bagasse. J Ind Eng Chem 20:462–473
Mantilaka MMMGPG, Wijesinghe WPSL, Dissanayake DMSN, Mihiri Ekanayake UG, Senthilnathan A (2020) Current review on the utilization of nanoparticles for ceramic matrix reinforcement. In: Goh KL, Aswathi MK, De Silva RT, Thomas S (eds) Interfaces in particle and fibre reinforced composites. Woodhead Publishing, Duxford, pp 345–367. https://doi.org/10.1016/B978-0-08-102665-6.00013-3
Mao H-n, Wang X-g (2020) Use of in-situ polymerization in the preparation of graphene/polymer nanocomposites. New Carbon Mater 35:336–343
Mei H, Xu Y, Sun Y, Bai Q, Cheng L (2016) Carbon nanotube buckypaper-reinforced SiCN ceramic matrix composites of superior electrical conductivity. J Eur Ceram Soc 36:1893–1898. https://doi.org/10.1016/j.jeurceramsoc.2016.02.045
Mohanty P, Mahapatra R, Padhi P, Ramana CVV, Mishra DK (2020) Ultrasonic cavitation: an approach to synthesize uniformly dispersed metal matrix nanocomposites – a review. Nano-Struct. Nano-Objects 23:100475. https://doi.org/10.1016/j.nanoso.2020.100475
Mondal S (2020) Nanocellulose reinforced polymer nanocomposites for sustainable packaging of foods, cosmetics, and pharmaceuticals. Sustainable nanocellulose and nanohydrogels from natural sources. Elsevier, pp 237–253
Nasir A, Masood F, Yasin T, Hameed A (2019) Progress in polymeric nanocomposite membranes for wastewater treatment: preparation, properties and applications. J Ind Eng Chem 79:29–40
Niihara K (1991) New design concept of structural ceramics. J Ceram Soc Jpn 99:974–982
Ningaraju S, Jagadish K, Srikantaswamy S, Prakash AG, Ravikumar H (2019) Synthesis of graphite oxide nanoparticles and conductivity studies of PSF/GO and PSAN/GO polymer nanocomposites. Mater Sci Eng B 246:62–75
Okpala CC (2013) Nanocomposites–an overview. Int J Eng Res Dev 8:17–23
Omanović-Mikličanin E, Badnjević A, Kazlagić A, Hajlovac M (2020) Nanocomposites: a brief review. Health Technol 10:51–59. https://doi.org/10.1007/s12553-019-00380-x
Palit S, Hussain CM (2020) Carbon-based polymer nanocomposite and environmental perspective. In: Emerging carbon-based nanocomposites for environmental applications. Wiley-Scrivener, Hoboken, pp 121–145
Palmero P (2015) Structural ceramic nanocomposites: a review of properties and powders’ synthesis methods. Nanomaterials 5:656–696
Palucka T, Bensaude-Vincent B (2002) Composites overview Dibner Institute for the History of Science and Technology. MIT
Pandey N, Shukla SK, Singh NB (2017) Water purification by polymer nanocomposites: an overview. Nanocomposites 3:47–66. https://doi.org/10.1080/20550324.2017.1329983
Passador F, Ruvolo-Filho A, Pessan L (2017) Nanocomposites of polymer matrices and lamellar clays. In: Nanostructures. Elsevier, pp 187–207
Peigney A, Laurent C, Flahaut E, Rousset A (2000) Carbon nanotubes in novel ceramic matrix nanocomposites. Ceram Int 26:677–683
Porwal H et al (2015) 45S5 Bioglass®–MWCNT composite: processing and bioactivity. J Mater Sci Mater Med 26:199. https://doi.org/10.1007/s10856-015-5529-9
Porwal H, Saggar R (2018) 6.6 Ceramic matrix nanocomposites. In: Beaumont PWR, Zweben CH (eds) Comprehensive composite materials II. Elsevier, Oxford, pp 138–161. https://doi.org/10.1016/B978-0-12-803581-8.10029-3
Rajmohan T, Palanikumar K, Ranganathan S (2013) Evaluation of mechanical and wear properties of hybrid aluminium matrix composites. Trans Nonferrous Metals Soc China 23:2509–2517. https://doi.org/10.1016/S1003-6326(13)62762-4
Riedel R (2012) Nanoscaled inorganic materials by molecular design. Chem Soc Rev 41:5029–5031
Saboori A, Moheimani SK, Dadkhah M, Pavese M, Badini C, Fino P (2018) An overview of key challenges in the fabrication of metal matrix nanocomposites reinforced by graphene nanoplatelets. Metals 8:172
Saleh TA, Parthasarathy P, Irfan M (2019) Advanced functional polymer nanocomposites and their use in water ultra-purification. Trends Environ Anal Chem 24:e00067
Samal SS, Bal S (2008) Carbon nanotube reinforced ceramic matrix composites-a review. J Miner Mater Charact Eng 7:355–370
Scaffaro R, Lopresti F, Catania V, Santisi S, Cappello S, Botta L, Quatrini P (2017) Polycaprolactone-based scaffold for oil-selective sorption and improvement of bacteria activity for bioremediation of polluted water: porous PCL system obtained by leaching melt mixed PCL/PEG/NaCl composites: oil uptake performance and bioremediation efficiency. Eur Polym J 91:260–273
Sen M (2020) Nanocomposite materials. In: Nanotechnology and the environment. IntechOpen
SERVICE MCAC analysis of nanocomposite materials. https://www.mcanac.co.jp/en/service/detail/9040.html?c1n=by+Analytical+Instrument&c1s=machine&c2n=Composite+Analysis&c2s=09. Accessed 1 Jan 2021
Shakil UA, Abu Hassan SB, Yahya MY, Mujiyono, Nurhadiyanto D (2021) A review of properties and fabrication techniques of fiber reinforced polymer nanocomposites subjected to simulated accidental ballistic impact. Thin-Walled Struct 158:107150. https://doi.org/10.1016/j.tws.2020.107150
Sharma S, Shashi SK, Tomar V (2014) Ceramic matrix composites with nano technology-an overview. Int Rev Appl Eng Res 4:99–102
Singh N, Mazumder R, Gupta P, Kumar D (2017) Ceramic matrix composites: processing techniques and recent advancements. J Mater Environ Sci 8:1654–1660
Sobhaniaragh B, Batra R, Mansur W, Peters F (2017) Thermal response of ceramic matrix nanocomposite cylindrical shells using Eshelby-Mori-Tanaka homogenization scheme. Compos Part B Eng 118:41–53
Sternitzke M (1997) Structural ceramic nanocomposites. J Eur Ceram Soc 17:1061–1082. https://doi.org/10.1016/S0955-2219(96)00222-1
Sun N, Jeurgens LPH, Burghard Z, Bill J (2017) Ionic liquid assisted fabrication of high performance SWNTs reinforced ceramic matrix nano-composites. Ceram Int 43:2297–2304. https://doi.org/10.1016/j.ceramint.2016.11.013
Thakur MK, Thakur VK, Gupta RK, Pappu A (2016) Synthesis and applications of biodegradable soy based graft copolymers: a review. ACS Sustain Chem Eng 4:1–17
Thangadurai TD, Manjubaashini N, Thomas S, Maria HJ (2020) Nanomaterials, properties and applications. In: Nanostructured materials. Springer International Publishing, Cham, pp 11–28. https://doi.org/10.1007/978-3-030-26145-0_2
Thomas M, Rajiv S (2020) Grafted PEO polymeric ionic liquid nanocomposite electrospun membrane for efficient and stable dye sensitized solar cell. Electrochim Acta 341:136040
Vaziri HS, Shokuhfar A, Afghahi SSS (2020) Synthesis of WS2/CNT hybrid nanoparticles for fabrication of hybrid aluminum matrix nanocomposite. Materials Research Express 7:025034
Vidya, Mandal L, Verma B, Patel PK (2020) Review on polymer nanocomposite for ballistic & aerospace applications. Mater Today Proc 26:3161–3166. https://doi.org/10.1016/j.matpr.2020.02.652
Vrankovic D et al (2017) Highly porous silicon embedded in a ceramic matrix: a stable high-capacity electrode for Li-ion batteries. ACS Nano 11:11409–11416. https://doi.org/10.1021/acsnano.7b06031
Wei D, Wang H, Ziaee Z, Chibante F, Zheg A, Xiao H (2016) Non-leaching antimicrobial biodegradable PBAT films through a facile and novel approach. Mater Sci Eng C 58:986–991
Xin X et al (2012) Highly efficient removal of heavy metal ions by amine-functionalized mesoporous Fe3O4 nanoparticles. Chem Eng J 184:132–140
Yang Y, Zhu Z-k, Yin J, Wang X-y, Qi Z-e (1999) Preparation and properties of hybrids of organo-soluble polyimide and montmorillonite with various chemical surface modification methods. Polymer 40:4407–4414
Yu J, Wang C, Wang J, Chu F (2016) In situ development of self-reinforced cellulose nanocrystals based thermoplastic elastomers by atom transfer radical polymerization. Carbohydr Polym 141:143–150
Yu S, Li S, Huang S, Zeng Z, Cui S, Liu Y (2017) Covalently bonded zeolitic imidazolate frameworks and polymers with enhanced compatibility in thin film nanocomposite membranes for gas separation. J Membr Sci 540:155–164
Zhang H, Xu C, Xiao W, Ameyama K, Ma C (2016) Enhanced mechanical properties of Al5083 alloy with graphene nanoplates prepared by ball milling and hot extrusion. Mater Sci Eng A 658:8–15
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Switzerland AG
About this entry
Cite this entry
Nasir, R., Hasan, M.R., Chowdhury, S. (2021). Synthesis and Applications of Polymer Nanocomposite Matrices: A Perspective. In: Hussain, C.M., Thomas, S. (eds) Handbook of Polymer and Ceramic Nanotechnology. Springer, Cham. https://doi.org/10.1007/978-3-030-40513-7_77
Download citation
DOI: https://doi.org/10.1007/978-3-030-40513-7_77
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-40512-0
Online ISBN: 978-3-030-40513-7
eBook Packages: Chemistry and Materials ScienceReference Module Physical and Materials ScienceReference Module Chemistry, Materials and Physics