Abstract
In contemporary machine tools as well as processing centres, threaded spindles are getting increasingly used. On this occasion, the higher speed of work and high accuracy of guidance are expected. Regarding this, the issue of fixing is very delicate resulting in axial angular contact ball bearings, which regarding their structure and performances, successfully meet the specified requirements. At greater work rates, there is heat load of these bearings. Due to that reason, in the designing phase, it is necessary to specify whether the temperature load shall be significant. If this is the case, the attention shall be paid to its thermal stability in the designing phase. In this paper, the experimental testing of thermal bound frequency of bearing type ZKLF, manufacturer “INA” - “Schaeffler Technologies” GmbH & Co. KG will be presented.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Deutsches Institut für Normung: Thermische Bezugsdrehzahl- Teil 1 (1994)
Deutsches Institut für Normung: Thermische Bezugsdrehzahl- Teil 2 (1994)
Mahmmod, A.M.: The effect of the heat generated by friction in the ball- screw-nut system on the precision of high speed machine. J. Al-Taqani 24(6), 112–123 (2011)
Zahedi, A., Movahhedy, M.R.: Thermo-mechanical modeling of high speed spindles. Sci. Iran. 19(2), 282–293 (2012)
Xiaolei, D., Jianzhong, F., Yuwen, Z.: A predictive model for temperature rise of spindle–bearing integrated system. J. Manuf. Sci. Eng. 137(2), 1–10 (2015)
Yoshida, T., Tozaki, Y., Omokawa, H., Hamanaka, K.: Tribological technology. Three-dimensional ball motion in angular contact ball bearing for high-speed machine tool spindle. J-GLOBAL 38(6), 304–307 (2001)
Xiao, S., Guo, J., Zhang, B.: Research on the motorized spindle’s thermal properties based on thermo-mechanical coupling analysis. In: Technology and Innovation Conference, pp. 1479–1483. ITIC, Hangzhou (2006)
Yang, L., Wanhua, Z.: Axial thermal error compensation method for the spindle of a precision horizontal machining. In: International conference Mechatronics and Automation, pp. 2319–2323. ICMA (2012)
Wang, B., Mei, X., Hu, C., Wu, Z.: Effect of inner ring centrifugal displacement on the dynamic characteristics of high-speed angular contact ball bearing. In: International Conference Mechatronics and Automation, pp. 951–956. ICMA (2010)
Krstić, V., Miltenović, A., Banić, M., Miltenović, Đ.: Grenzdrehzahlermittlung an axialschrägkugellager für Gewindetriebe. In: Proceedings of the 7th International Conference “Research and Development of Mechanical Elements and Systems”, IRMES, Zlatibor- Republic of Serbia (2011)
Krstić, V., Miltenović, A., Banić, M.: Thermal speed limit of axial roller bearings used in support of screw- nut transmissions. Balk. J. Mech. Transm. 1(2), 39–44 (2011). ISSN 2069-5497
Krstić, V., Milčić, D., Milčić, M.: A thermal analysis of the threaded spindle bearing assembly in numerically controlled machine tools. Facta Univ. 16(2), 261–272 (2018). ISSN 0354-2025
Krstić, V.: Research of construction- tribological parameters of ball bearings with angular contact type ZKLF in terms of optimal basic function. Doctoral dissertation. University in Niš (2018)
Schaeffler Gruppe Industrie: Lager für Gewindetriebe, Katalog TPI 123D-D: Schaeffler Gruppe (2009)
Schaeffler Technologies GmbH&Co. KG: Bearinx program package: Schaeffler Technologies GmbH&Co. KG
Wu, L., Tan, Q.: Thermal characteristic analysis and experimental study of a spindle-bearing system, entropy. Open Access J. 18(7), 271 (2016)
Wang, Y.S., Liu, Z., Zhu, H.F.: Heat generation of bearing. Key Eng. Mater. 480–481, 962–967 (2011)
Zhang, Y., hu Li, X., Hong, J., Yan, K., Li, S.: Uneven heat generation and thermal performance of spindle bearings. In: Tribology International, vol. 126, pp. 324–335 (2018)
Balamurugan, N., Bhagyanathan, C.: Analysis and investigation on thermal behaviours of ball bearing in high speed spindle. Int. J. Innov. Sci. Mod. Eng. (IJISME) 2(4), 16–20 (2014)
Liu, X.W., Wang, W., Wang, Q.L.: Analysis of temperature field of high speed angular contact ball bearing based on ANSYS. Comb. Mach. Tool Autom. Mach. Technol. 3, 13–15 (2015)
Bian, W., Wang, Z., Yuan, J., Xu, W.: Thermo-mechanical analysis of angular contact ball bearing. J. Mech. Sci. Technol. 30(1), 297–306 (2016)
Chen, G., Wang, L., Gu, L., Zheng, D.-Z.: Heating analysis of the high speed ball bearing. J. Aerosp. Power 22(1), 163–168 (2007)
Dong, Y., Zhou, Z., Liu, M.: Bearing preload optimization for machine tool spindle by the influencing multiple parameters on the bearing performance. Adv. Mech. Eng. 9(2), 1–9 (2017)
Brecher, C., Shneor, Y., Neus, S., Bakarinow, K., Fey, M.: Thermal behavior of externally driven spindle: experimental study and modelling. Engineering 7, 73–92 (2015)
Živković, A., Zeljković, M., Mladjenović, C., Tabaković, S., Milojević, Z., Hadžistević, M.: A study of thermal behavior of the machine tool spindle. Thermal Science (2018). ISSN 0354-9836
Baïri, A., Alilat, N., Bauzin, J.G., Laraqi, N.: Three-dimensional stationary thermal behavior of a bearing ball. Int. J. Therm. Sci. 43(6), 561–568 (2004)
Zhou, X., Zhang, H., Hao, X., Liao, X., Han, Q.: Investigation on thermal behavior and temperature distribution of bearing inner and outer rings. Tribol. Int. 130, 289–298 (2019)
Jin, C., Wu, B., Hu, Y.: Heat generation modeling of ball bearing based on internal load distribution. Tribol. Int. 45(1), 8–15 (2012)
Rabréau, C., Kekula, J., Ritou, M., Sulitka, M., Shim, J., LeLoch, S., Furet, B.: Influence of bearing kinematics hypotheses on ball bearing heat generation. Proc. CIRP 77, 622–625 (2018)
Than, V.-T., Huang, J.H.: Nonlinear thermal effects on high-speed spindle bearings subjected to preload. Tribol. Int. 96, 361–372 (2016)
Acknowledgement
This paper presents the results of the research conducted within the project “Research and development of new generation machine systems in the function of the technological development of Serbia” funded by the Faculty of Mechanical Engineering, University of Niš, Serbia.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Krstic, V., Milcic, D., Milcic, M. (2020). Experimental Investigations on Bound Frequency of Axial Ball Bearings for Fixing the Ball Screws. In: Mitrovic, N., Milosevic, M., Mladenovic, G. (eds) Computational and Experimental Approaches in Materials Science and Engineering. CNNTech 2018. Lecture Notes in Networks and Systems, vol 90. Springer, Cham. https://doi.org/10.1007/978-3-030-30853-7_19
Download citation
DOI: https://doi.org/10.1007/978-3-030-30853-7_19
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-30852-0
Online ISBN: 978-3-030-30853-7
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)