Skip to main content

Incremental Sheet Metal Forming Processes

  • Living reference work entry
  • First Online:
Handbook of Manufacturing Engineering and Technology

Abstract

Incremental sheet metal forming (ISMF) has demonstrated its great potential to form complex three-dimensional parts without using component-specific tools against the conventional stamping operation. Forming components without component-specific tooling in ISMF provides a competitive alternative for economically and effectively fabricating low-volume functional sheet metal products; hence, it offers a valid manufacturing process to match the need of mass customization, which is regarded as the future of manufacturing. In ISMF process, sheet is clamped in a fixture/frame with an opening window on a programmable machine, and a hemispherical/spherical ended tool is programmed to move in a predefined path giving shape to the clamped sheet by progressively deforming a small region in incremental steps. Although formability in incremental forming is higher than that of conventional forming, the capability to form components with desired accuracy and surface finish without fracture becomes an important requirement for commercializing the ISMF processes. This chapter presents various configurations developed to incrementally form the sheet metal components, experimental as well as numerical methods for estimating forming limits, procedures for enhancing the accuracy, and methodologies for tool path generation.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Institutional subscriptions

Similar content being viewed by others

References

  • Abhishek K (2009) Multi-stage tool path strategies for single point incremental forming. M.Tech. thesis, Indian Institute of Technology, Kanpur

    Google Scholar 

  • Aerens R, Eyckens P, Bael AV, Duflou JR (2009) Force prediction for single point incremental forming deduced from experimental and FEM observations. Int J Adv Manuf Technol 46:969–982

    Article  Google Scholar 

  • Allwood JM, Utsunomiya H (2006) A survey of flexible forming processes in Japan. Int J Mach Tool Manuf 46:1939–1960

    Article  Google Scholar 

  • Allwood JM, Houghton NE, Jackson KP (2005) The design of an incremental sheet forming machine. Adv Mater Res 6–8:471–478

    Article  Google Scholar 

  • Allwood JM, Bramley AN, Ridgman TW, Mileham AR (2006) A novel method for the rapid production of inexpensive dies and moulds with surfaces made by incremental sheet forming. Proc Inst Mech Eng Part B J Eng Manuf 220:323–327

    Article  Google Scholar 

  • Allwood JM, Shouler DR, Tekkaya AE (2007) The increased forming limits of incremental sheet forming processes. Key Eng Mater 344:621–628

    Article  Google Scholar 

  • Allwood JM, Music O, Raithathna A, Duncan SR (2009) Closed-loop feedback control of product properties in flexible metal forming processes with mobile tools. CIRP Ann 58(1):287–290

    Article  Google Scholar 

  • Ambrogio G, Costantino I, Napoli LD, Filice L, Muzzupappa M (2004) Influence of some relevant process parameters on the dimensional accuracy in incremental forming: a numerical and experimental investigation. J Mater Process Technol 153–154:501–507

    Article  Google Scholar 

  • Ambrogio G, Filice L, Gagliardi F, Micari F (2005a) Sheet thinning prediction in single point incremental forming. Adv Mater Res 6–8:479–486

    Article  Google Scholar 

  • Ambrogio G, Filice L, De Napoli L, Muzzupappa M (2005b) A simple approach for reducing profile diverting in a single point incremental forming process. J Eng Manuf 219(11):823–830

    Article  Google Scholar 

  • Ambrogio G, De Napoli L, Filice L, Gagliardi F, Muzzupappa M (2005c) Application of incremental forming process for high customized medical product manufacturing. J Mater Process Technol 162–163:156–162

    Article  Google Scholar 

  • Ambrogio G, Filice L, Micari F (2006) A force measuring based strategy for failure prevention in incremental forming. J Mater Process Technol 177:413–416

    Article  Google Scholar 

  • Ambrogio G, Duflou J, Filice L, Aerens R (2007) Some considerations on force trends in Incremental Forming of different materials. In: Proceedings of 10th ESAFORM conference on material forming, Zaragoza, Spin, April 2007 vol 907, pp 193–197

    Google Scholar 

  • Ambrogio G, Cozza V, Filice L, Micari F (2007b) An analytical model for improving precision in single point incremental forming. J Mater Process Technol 191:92–95

    Article  Google Scholar 

  • Asghar J (2012) Tool path compensations for enhancing accuracy in incremental sheet metal forming. M.Tech. thesis, Indian Institute of Technology, Kanpur

    Google Scholar 

  • Asghar J, Shibin E, Bhattacharya A, Reddy NV (2012) Twist in single point incremental forming. In: Proceedings of the international manufacturing science and engineering conference, University of Norte Dame, Norte Dame

    Google Scholar 

  • Attanasio A, Ceretti E, Giardini C (2006) Optimization of tool path in two points incremental forming. J Mater Process Technol 177:409–412

    Article  Google Scholar 

  • Attanasio A, Ceretti E, Giardini C, Mazzoni L (2008) Asymmetric two points incremental forming: improving surface quality and geometric accuracy by tool path optimization. J Mater Process Technol 197(1–3):59–67

    Article  Google Scholar 

  • Azaouri M, Lebbal N (2012) Tool path optimization for single point incremental sheet forming using response surface method. Simul Model Pract Theory 24:49–58

    Article  Google Scholar 

  • Bambach M, Ames J, Azaouzi M, Campagne L, Hirt G, Batoz JL (2005) Initial experimental and numerical investigations into a class of new strategies for single point incremental sheet forming (SPIF). In: Proceeding of 8th ESAFORM conference on material forming, Cluj-Napoca, Romania, April 2005 pp 671–674

    Google Scholar 

  • Behera AK, Verbert J, Lauwers B, Duflou JR (2013) Tool path compensation strategies for single point incremental sheet forming using multivariate adaptive regression splines. ComputAided Des 45:575–590

    Google Scholar 

  • Bhattacharya A, Reddy NV, Maneesh K, Cao J (2011) Formability and surface finish studies in single point incremental forming. ASME J Manuf Sci Eng 133:0610201–0610208

    Article  Google Scholar 

  • Cao J, Huang Y, Reddy NV, Malhotra R, Wang Y (2008) Incremental sheet metal forming: advances and challenges. In: Proceedings of international conference on technology of plasticity, Gyeongju, 1967–1982

    Google Scholar 

  • Chintan YD (2008) Single point incremental forming: force and thickness measurements. M.Tech. thesis, Indian Institute of Technology, Kanpur

    Google Scholar 

  • Duflou JR, Szekeres A, Vanherck P (2005) Force measurements for single point incremental forming: an experimental study. Adv Mater Res 6–8:441–448

    Article  Google Scholar 

  • Duflou J, Kol YT, Szekeres A, Vanherck P (2007a) Experimental study on force measurements for single point incremental forming. J Mater Process Technol 189:65–72

    Article  Google Scholar 

  • Duflou JR, Callebaut B, Verbert J, De Baerdemaeker H (2007b) Laser assisted incremental forming: formability and accuracy improvement. CIRP Ann 56:273–276

    Article  Google Scholar 

  • Duflou JR, Callebaut B, Verbert J, De Baerdemaeker H (2008a) Improved SPIF performance through dynamic local heating. Int J Mach Tool Manuf 48:543–549

    Article  Google Scholar 

  • Duflou JR, Verbert J, Belkassem B, Gu J, Sol H, Henrard C, Habraken AM (2008b) Process window enhancement for single point incremental forming through multi-step toolpaths. CIRP Ann 57:253–256

    Article  Google Scholar 

  • Duflou JR, Vanhove H, Verbert J, Gu J, Vasilakos I, Eyckens P (2010) Twist revisited: twist phenomena in single point incremental forming. CIRP Ann 59:307–310

    Article  Google Scholar 

  • Emmens WC (2006) Water jet forming of steel beverage cans. Int J Mach Tool Manuf 46:1243–1247

    Article  Google Scholar 

  • Emmens WC, Sebastiani G, Googaard AH (2010) The technology of incremental sheet forming – a brief review of the history. J Mater Process Technol 210:981–997

    Article  Google Scholar 

  • Filice L, Fratini L, Micari F (2002) Analysis of material formability in incremental forming. CIRP Ann 51(1):199–202

    Article  Google Scholar 

  • Filice L, Ambrogio G, Micari F (2006) On-line control of single point incremental forming operations through punch force monitoring. CIRP Ann 55:245–248

    Article  Google Scholar 

  • Fratini L, Ambrogio G, Di Lorenzo R, Filice L, Micari F (2004) Influence of mechanical properties of the sheet material on formability in single point incremental forming. CIRP Ann 53(1):207–210

    Article  Google Scholar 

  • Governale A, Franco AL, Panzeca A, Frantini L, Micari F (2007) Incremental forming process for the accomplishment of automotive details. Key Eng Mater 344:559–566

    Article  Google Scholar 

  • Groche P, Fritsche D, Tekkaya EA, Allwood JM, Hirt G, Neugebauer R (2007) Incremental bulk metal forming. CIRP Ann 56(2):635–656

    Article  Google Scholar 

  • Hagan E, Jeswiet J (2004) Analysis of surface roughness for parts formed by computer numerical controlled incremental forming. J Eng Manuf 218:1307–1312

    Article  Google Scholar 

  • Ham M, Jeswiet J (2006) Single point incremental forming and the forming criteria for AA3003. CIRP Ann 55:241–244

    Article  Google Scholar 

  • Ham M, Jeswiet J (2007) Forming limit curves in single point incremental forming. CIRP Ann 56:277–280

    Article  Google Scholar 

  • Ham M, Powers B, Brown CA, Jeswiet J, Hamilton K (2009) Roughness evaluation of single point incrementally formed surfaces. Trans N Am Manuf Res Inst Soc Manuf Eng 37:222–230

    Google Scholar 

  • Hamilton K, Jeswiet J (2010) Single point incremental forming at high feed rates and rotational speeds: surface and structural consequences. CIRP Ann 59:311–314

    Article  Google Scholar 

  • Henrard C, Bouffioux C, Eyckens P, Sol H, Duflou JR, Van Houtte P, Van Bael A, Duchene L, Habraken A (2011) Forming forces in single point incremental forming: prediction by finite element simulations, validation and sensitivity. Comput Mech 47:573–590

    Article  MATH  Google Scholar 

  • Hirt G, Ames J, Bambach M, Kopp R (2004) Forming strategies and Process Modelling for CNC Incremental Sheet Forming. CIRP Ann 53(1):203–206

    Article  Google Scholar 

  • Hussain G, Gao L (2007) A novel method to test the thinning limits of sheet- metals in negative incremental forming. Int J Mach Tool Manuf 47:419–435

    Article  Google Scholar 

  • Hussain G, Gao L, Dar NU (2007a) An experimental study on some formability evaluation methods in negative incremental forming. J Mater Process Technol 186:45–53

    Article  Google Scholar 

  • Hussain G, Dar NU, Gao L, Chen MH (2007b) A comparative study on the forming limits of an aluminum sheet-metal in negative incremental forming. J Mater Process Technol 187:94–98

    Article  Google Scholar 

  • International Patent (1999) WO 00/16926–PCT/US99/21890, 20 Sept 1999, Ball Corporation (US)

    Google Scholar 

  • Iseki H, Kumon H (1994) Forming limit of incremental sheet metal stretch forming using spherical rollers. J JSTP 35:1336–1341

    Google Scholar 

  • Jackson K, Allwood J (2009) The mechanics of incremental sheet forming. J Mater Process Technol 209:1158–1174

    Article  Google Scholar 

  • Jackson KP, Allwood JM, Landert M (2007) Incremental forming of sandwich panels. Key Eng Mater 344:591–598

    Article  Google Scholar 

  • Jeswiet J (2001) Incremental single point forming. Trans NAMRI/SME 29:75–79

    Google Scholar 

  • Jeswiet J, Szekeres A (2005) Forces in single point incremental forming. Trans NAMRI/SME 30:399–404

    Google Scholar 

  • Jeswiet J, Micari F, Hirt G, Bramley A, Duflou A, Allwood J (2005a) Asymmetric single point incremental forming of sheet metal. CIRP Ann 54(2):623–649

    Article  Google Scholar 

  • Jeswiet J, Duflou JR, Szekeres A (2005b) Forces in single point and two point incremental forming. Adv Mater Res 6–8:449–456

    Article  Google Scholar 

  • Jurisevic B, Heiniger KC, Kuzman K, Junkar M (2003) Incremental sheet metal forming with a high-speed water jet. In: Proceedings of the IDDRG congress, Bled, Slovenia pp 139–148

    Google Scholar 

  • Keeler SP, Backhofen WA (1964) Plastic instability and fracture in sheet stretched over rigid punches. Trans ASM 56:25–48

    Google Scholar 

  • Kim YH, Park JJ (2002) Effect of process parameters on formability in incremental forming of sheet metal. J Mater Process Technol 130:42–46

    Article  Google Scholar 

  • Kim TJ, Yang DY (2000) Improvement of formability for the incremental sheet metal forming process. Int J Mech Sci 42(7):1271–1286

    Article  MATH  Google Scholar 

  • Koganti M (2011) Geometrical accuracy and complexity using double sided incremental forming. M.Tech. thesis, Indian Institute of Technology, Kanpur

    Google Scholar 

  • Kopac J, Kampus Z (2005) Incremental sheet metal forming on CNC milling machine-tool. J Mater Process Technol 162–163:622–628

    Article  Google Scholar 

  • Lee E (2003) Contour offset approach to spiral toolpath generation with constant scallop height. Comput Aided Des 35:511–518

    Article  Google Scholar 

  • Leszak E (1967) Patent: apparatus and process for incremental dieless forming. US patent office, Patent number: 3,342,051

    Google Scholar 

  • Lingam R (2012) An interactive tool for feature sequencing in incremental sheet metal forming. M.Tech. thesis, Indian Institute of Technology, Kanpur

    Google Scholar 

  • Malhotra R (2008) Automatic tool path generation for single point incremental forming. M.Tech. thesis, Indian Institute of Technology, Kanpur

    Google Scholar 

  • Malhotra R, Reddy NV, Cao J (2010) Automatic 3D spiral tool path generation for single point incremental forming. ASME J Manuf Sci Eng 132(6):061003.1–061003.10

    Article  Google Scholar 

  • Malhotra R, Bhattacharya A, Kumar A, Reddy NV, Cao J (2011a) A new methodology for multi-pass single point incremental forming with mixed tool paths. CIRP Ann 60:323–326

    Article  Google Scholar 

  • Malhotra R, Cao J, Ren F, Kiridena V, Xia ZC, Reddy NV (2011b) Improvement of geometric accuracy in incremental forming by using a squeezing tool path strategy with two forming tools. ASME J Manuf Sci Eng 133:061019. 1–061019.10

    Article  Google Scholar 

  • Malhotra R, Xue L, Belytschko T, Cao J (2012a) Mechanics of fracture in single point incremental forming. J Mater Process Technol 212:1573–1590

    Article  Google Scholar 

  • Malhotra R, Cao J, Beltran M, Xu D, Magargee J, Kiridena V, Xia ZC (2012b) Accumulative – DSIF strategy for enhancing process capabilities in incremental forming. CIRP Ann 61:251–254

    Article  Google Scholar 

  • Matsubara S (2001) A computer numerically controlled dieless incremental forming of a sheet metal. Proc Inst Mech Eng 215:959–966

    Article  Google Scholar 

  • Meier H, Magnus C, Smukala V (2011) Impact of superimposed pressure on dieless incremental sheet metal forming with two moving tools. CIRP Ann 60:327–330

    Article  Google Scholar 

  • Meier H, Zhu J, Buff B, Laurischkat R (2012) CAx process chain for two robots based incremental sheet metal forming. CIRP Ann 3:37–42

    Google Scholar 

  • Oyane M (1980) Criteria for ductile fracture and their applications. J Mech Work Technol 4:65–81

    Article  Google Scholar 

  • Pandey PM, Reddy NV, Dhande SG (2003) Slicing procedures in layered manufacturing. Rapid Prototyp J 9(5):274–288

    Article  Google Scholar 

  • Park JJ, Kim YH (2003) Fundamental studies on the incremental sheet metal forming technique. J Mater Process Technol 140:447–453

    Article  Google Scholar 

  • Shibin E (2012) Finite element analysis of incremental sheet metal forming. M.Tech. thesis, Indian Institute of Technology, Kanpur

    Google Scholar 

  • Shim MS, Park JJ (2001) The formability of aluminium sheet in incremental forming. J Mater Process Technol 113:654–658

    Article  Google Scholar 

  • Singh S (2009) Single point incremental forming: formability and surface finish studies. M.Tech. Thesis, Indian Institute of Technology, Kanpur

    Google Scholar 

  • Skjoedt M, Hancock MH, Bay N (2007) Creating helical tool paths for single point incremental forming. Key Eng Mater 344:583–590

    Article  Google Scholar 

  • Skjoedt M, Bay N, Endelt B, Ingarao G (2008) Multi stage strategies for single point incremental forming of a cup. Int J Mater Form 1:1199–1202

    Article  Google Scholar 

  • Skjoedt M, Silva MB, Martins PAF, Bay N (2010) Strategies and limits in multi-stage single-point incremental forming. J Strain Anal Eng Des 45:33–44

    Article  Google Scholar 

  • Srivastsava A (2010) Electric pulse aided single point incremental forming, M.Tech. thesis, Indian Institute of Technology, Kanpur

    Google Scholar 

  • Szekeres A, Ham M, Jeswiet J (2007) Force Measurement in pyramid shaped parts with a spindle mounted force sensor. Key Eng Mater 344:551–558

    Article  Google Scholar 

  • Takano H, Kitazawa K, Goto T (2008) Incremental forming of no uniform sheet metal: possibility of cold recycling process of sheet metal waste. Int J Mach Tool Manuf 48:477–482

    Article  Google Scholar 

  • Tanaka S, Nakamura T, Hayakawa K, Motomura K (2007) Residual stress in sheet metal parts made by incremental forming process. In: Proceeding of the 9th NUMIFORM, Porto, Portuguese, June 2007 pp 775–780

    Google Scholar 

  • Vanhove H, Verbert J, Gu J, Vasilakos I, Duflou RJ (2010) An experimental study of twist phenomena in single point incremental forming. Int J Mater Form 3:975–978

    Article  Google Scholar 

  • Verbert J, Duflou JR, Lauwers B (2007) Feature based approach for increasing the accuracy of the SPIF process. Key Eng Mater 344:527–534

    Article  Google Scholar 

  • Wulf WA (2007) Changes in innovation ecology. Science 316:1253

    Article  Google Scholar 

  • Xu D, Malhotra R, Reddy NV, Chen J, Cao J (2012) Analytical prediction of stepped feature generation in multi-pass single point incremental forming. J Manuf Process 14:487–494

    Article  Google Scholar 

  • Yoon SJ, Yang DY (2001) Investigation into a new incremental forming process using an adjustable punch set for the manufacture of a doubly curved sheet metal. Proc Inst Mech Eng 215:991–1004

    Article  Google Scholar 

  • Young D, Jeswiet J (2004) Wall thickness variations in single-point incremental forming. J Eng Manuf 218:1453–1459

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Venkata Reddy Nallagundla .

Editor information

Editors and Affiliations

Rights and permissions

Reprints and permissions

Copyright information

© 2014 Springer-Verlag London

About this entry

Cite this entry

Nallagundla, V., Lingam, R., Cao, J. (2014). Incremental Sheet Metal Forming Processes. In: Nee, A. (eds) Handbook of Manufacturing Engineering and Technology. Springer, London. https://doi.org/10.1007/978-1-4471-4976-7_45-5

Download citation

  • DOI: https://doi.org/10.1007/978-1-4471-4976-7_45-5

  • Received:

  • Accepted:

  • Published:

  • Publisher Name: Springer, London

  • Online ISBN: 978-1-4471-4976-7

  • eBook Packages: Springer Reference EngineeringReference Module Computer Science and Engineering

Publish with us

Policies and ethics