Abstract
Laser processing has been applied in various fields, including optoelectronics, the automotive and aerospace industries, and biomedicine. Thus, the properties of laser-processed samples to be evaluated differ depending on their purpose, and an optimal approach for each application should be selected. In this chapter, we focus on some typical evaluation metrics required in general cases, such as surface morphology, cross-sectional profile, composition, and crystallinity; these can be determined using scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX), confocal laser scanning microscopy, X-ray photoelectron spectroscopy (XPS), X-ray diffraction, and Raman spectroscopy. Since the characteristics of the information obtained by each measurement differ, an optimal method must be selected for a given purpose. For example, SEM-EDX can measure the local composition on a microscale after laser processing; conversely, to measure the composition with a higher surface sensitivity, XPS is preferable. Recently, laser processing has increasingly been applied to complicated devices, and there are an increasing number of cases in which the characteristics of laser-processed devices are evaluated. Examples of device characterization after laser processing are also introduced for thin film solar cells scribed by ultrashort pulse lasers. Improved characterization of laser-processed samples will help to accelerate process optimization and social implementation of laser processing in the future.
Similar content being viewed by others
References
Bonse J, Kirner SV, Koter R et al (2017) Femtosecond laser-induced periodic surface structures on titanium nitride coatings for tribological applications. Appl Surf Sci 418:572–579
Gečys P, Markauskas E, Nishiwaki S et al (2017) CIGS thin-film solar module processing: case of high-speed laser scribing. Sci Rep 7:40502
Gruner A, Schille J, Loeschner U (2018) High repetition frequency micro hole drilling of metal foils using ultrashort pulse laser radiation. Proc SPIE 10520:105200R
Hocine S, Swygenhoven HV, Petegem SV et al (2020) Operando X-ray diffraction during laser 3D printing. Mater Today 34:30–40
Holder D, Buser M, Leis A et al (2020) High-precision laser ablation using OCT closed-loop control. Proc of SPIE 11267:1126710
Ito Y, Shinomoto R, Nagato K et al (2018) Mechanisms of damage formation in glass in the process of femtosecond laser drilling. Appl Phys A Mater Sci Process 124:181
Kerse C, Kalaycıoğlu H, Elahi P et al (2016) Ablation-cooled material removal with ultrafast bursts of pulses. Nature 537:84–88
Korte F, Adams S, Egbert A et al (2000) Sub-diffraction limited structuring of solid targets with femtosecond laser pulses. Opt Express 7:41–49
Kunz C, Bonse J, Spaltmann D et al (2020) Tribological performance of metal-reinforced ceramic composites selectively structured with femtosecond laser-induced periodic surface structures. Appl Surf Sci 499:143917
Mishchik K, Beuton R, Dematteo Caulier O et al (2017) Improved laser glass cutting by spatio-temporal control of energy deposition using bursts of femtosecond pulses. Opt Express 25:33271–33282
Miyaji G, Miyazaki K (2008) Origin of periodicity in nanostructuring on thin film surfaces ablated with femtosecond laser pulses. Opt Express 16:16265–16271
Morales-Vidal M, Sola ÍJ, Castillo GR et al (2020) Ultrashort pulse propagation through depressed-cladding channel waveguides in YAG crystal: Spatio-temporal characterization. Opt Laser Technol 123:105898
Nakata Y, Tsubakimoto K, Miyanaga N et al (2021) Laser-induced transfer of noble metal nanodots with femtosecond laser-interference processing. Nano 11:305
Narazaki A, Sato T, Kawaguchi Y et al (2002) Pulsed laser deposition of semiconductor-ITO composite films on electric-field-applied substrates. Appl Surf Sci 197–198:438–441
Narazaki A, Kawaguchi Y, Niino H et al (2005) Formation of a TiO2 micronetwork on a UV-absorbing SiO2-based glass surface by excimer laser irradiation. Chem Mater 17:6651–6655
Narazaki A, Sato T, Kawaguchi Y et al (2008) Nano- and microdot array formation of FeSi2 by nanosecond excimer laser-induced forward transfer. Appl Phys Express 1:057001
Narazaki A, Kurosaki R, Sato T et al (2016) Femtosecond laser scribing of Cu(In,Ga)Se2 thin-film solar cell. J Laser Micro Nanoeng 11:130–136
Narazaki A, Nishinaga J, Takada H et al (2018) Evaluation of femtosecond laser-scribed Cu(In,Ga)Se2 solar cells using scanning spreading resistance microscopy. Appl Phys Express 11:032301
Narazaki A, Oyane A, Komuro S et al (2019) Bioactive micropatterning of apatite immobilizing cell adhesion protein by laser-induced forward transfer with a shock absorber. Opt Mater Express 9:2807–2816
Narazaki A, Takada H, Yoshitomi D et al (2020) Study on nonthermal–thermal processing boundary in drilling of ceramics using ultrashort pulse laser system with variable parameters over a wide range. Appl Phys A Mater Sci Process 126:252
Narazaki A, Takada H, Yoshitomi D et al (2021) Ultrafast laser processing of ceramics: comprehensive survey of laser parameters. J Laser Appl 33:012009
Normand FL, Hommet J, Szörényi T et al (2001) XPS study of pulsed laser deposited CNx films. Phys Rev B 64:235416
Oh S, Lee I, Park YB et al (2019) Investigation of cut quality in fiber laser cutting of CFRP. Opt Laser Technol 113:129–140
Olson NE, Xiao Y, Lei Z et al (2020) Simultaneous optical photothermal infrared (O-PTIR) and Raman spectroscopy of submicrometer atmospheric particles. Anal Chem 92:9932–9939
Rebollar E, Frischauf I, Olbrich M et al (2008) Proliferation of aligned mammalian cells onlaser-nanostructured polystyrene. Biomaterials 29:1796–1806
Serien D, Sugioka K (2020) Three-dimentional printing of pure proteinaceous microstructures by femtosecond laser multiphoton cross-linking. ACS Biomater Sci Eng 6:1279–1287
“Spectral Database for Organic Compounds”. https://sdbs.db.aist.go.jp/sdbs/cgi-bin/direct_frame_top.cgi
Wang WJ, Yung KC, Choy HS et al (2018) Effects of laser polishing on surface microstructure and corrosion resistance of additive manufactured CoCr alloys. Appl Surf Sci 443:167–175
Yoshida T, Okoshi M (2019) A resist-less patterning method of Al thin film on polycarbonate by F2 laser irradiation. Surfaces and Interfaces 17:100373
Yoshitomi D, Takada H, Torizuka K, et al (2019) 100-W average power femtosecond fiber laser system with variable parameters for rapid optimization of laser processing. Conference on Lasers and Electro-Optics OSA Technical Digest (Optical Society of America, Washington, DC) paper SM3L.2
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Section Editor information
Rights and permissions
Copyright information
© 2021 Springer Nature Switzerland AG
About this entry
Cite this entry
Narazaki, A. (2021). Characterization of Laser-Processed Samples. In: Sugioka, K. (eds) Handbook of Laser Micro- and Nano-Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-69537-2_64-1
Download citation
DOI: https://doi.org/10.1007/978-3-319-69537-2_64-1
Received:
Accepted:
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-69537-2
Online ISBN: 978-3-319-69537-2
eBook Packages: Springer Reference Physics and AstronomyReference Module Physical and Materials ScienceReference Module Chemistry, Materials and Physics