Abstract
In today’s advanced world, optimization of energy systems to reduce energy consumption and costs in the industrial area has received much attention. Meanwhile, the optimal design of energy consuming components and equipment plays an influential role in this process. Shell and tube heat exchangers (STHE) are used as the most common type of heat exchangers in many industries, so optimal design of this equipment in order to save design and operation costs is important. Due to the nature of the problem, various environmental and structural parameters play a role in the final design, which causes many uncertainties in the design process of this equipment. Therefore, in this study, the optimal design of STHE with a multi-objective approach including minimizing costs and maximizing the reliability index was investigated. For this purpose, a new hybrid method including Naive Bayesian and subset simulation method is proposed. The redesign results show that the developed framework has the promising potential to enhance computational time efficiency with high accuracy for the multi-objective reliability-based design optimization of STHE. Moreover, the curve of Pareto front and a set of robust design values of STHE are obtained for the high-safety level design of STHE. According to the results, considering the uncertainties during the design lead to a safe and robust model. Since design uncertainty is unavoidable, the results are closer to reality and show greater accuracy.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
S-K Au, J.L. Beck, Estimation of small failure probabilities in high dimensions by subset simulation. Probab Eng Mech. 16:263–77 (2001). https://doi.org/10.1016/S0266-8920(01)00019-4
M. Amini, M. Bazargan, Two objective optimization in shell-and-tube heat exchangers using genetic algorithm. Appl. Therm. Eng. 69(1–2), 278–285 (2014)
M. Asadi, Y. Song, B. Sunden, G. Xie, Economic optimization design of shell-and-tube heat exchangers by a cuckoo-search-algorithm. Appl. Therm. Eng. 73(1), 1032–1040 (2014)
H. Azarkish, M. Rashki, Reliability and reliability-based sensitivity analysis of shell and tube heat exchangers using Monte Carlo simulation. Appl. Therm. Eng. 159, 113842 (2019)
A.C. Caputo, P.M. Pelagagge, P. Salini, Heat exchanger design based on economic optimisation. Appl. Therm. Eng. 28(10), 1151–1159 (2008)
E.H. de Vasconcelos Segundo, V.C. Mariani, L. dos Santos Coelho, Design of heat exchangers using falcon optimization algorithm. Appl. Therm. Eng. 156, 119–144 (2019)
A. El Maakoul, A. Laknizi, S. Saadeddine, M. El Metoui, A. Zaite, M. Meziane, A.B. Abdellah, Numerical comparison of shell-side performance for shell and tube heat exchangers with trefoil-hole, helical and segmental baffles. Appl. Therm. Eng. 109, 175–185 (2016)
M. Fesanghary, E. Damangir, I. Soleimani, Design optimization of shell and tube heat exchangers using global sensitivity analysis and harmony search algorithm. Appl. Therm. Eng. 29(5–6), 1026–1031 (2009)
T. Gholizadeh, M. Vajdi, H. Rostamzadeh, Exergoeconomic optimization of a new trigeneration system driven by biogas for power, cooling, and freshwater production. Energy Convers. Manag. 205, 112417 (2020)
A. Hadidi, A. Nazari, Design and economic optimization of shell-and-tube heat exchangers using biogeography-based (BBO) algorithm. Appl. Therm. Eng. 51(1–2), 1263–1272 (2013)
A. Hadidi, M. Hadidi, A. Nazari, A new design approach for shell-and-tube heat exchangers using imperialist competitive algorithm (ICA) from economic point of view. Energy Convers. Manag. 67, 66–74 (2013)
H. Hajabdollahi, P. Ahmadi, I. Dincer, Thermoeconomic optimization of a shell and tube condenser using both genetic algorithm and particle swarm. Int. J. Refrig. 34(4), 1066–1076 (2011)
J. Jafari-Asl, S. Ohadi, M.E.A. Ben Seghier, N.T. Trung, Accurate structural reliability analysis using an improved line-sampling-method-based slime mold algorithm. ASME J. Risk Uncertain. Eng. Syst. 7(2), 04021015 (2021)
J. Jafari-Asl, M.E.A.B. Seghier, S. Ohadi, J. Correia, J. Barroso, Reliability analysis based improved directional simulation using harris hawks optimization algorithm for engineering systems. Eng. Fail. Anal. 106148 (2022)
M.A. Jamil, T.S. Goraya, M.W. Shahzad, S.M. Zubair, Exergoeconomic optimization of a shell-and-tube heat exchanger. Energy Convers. Manag. 226, 113462 (2020)
R. Khosravi, A. Khosravi, S. Nahavandi, H. Hajabdollahi, Effectiveness of evolutionary algorithms for optimization of heat exchangers. Energy Convers. Manag. 89, 281–288 (2015)
O.D. Lara-Montaño, F.I. Gómez-Castro, C. Gutiérrez-Antonio, Development of a virtual environment for the rigorous design and optimization of shell-and-tube heat exchangers, in Computer Aided Chemical Engineering 48, 19–24 (2020). Elsevier
V.C. Mariani, A.R.K. Duck, F.A. Guerra, L. dos Santos Coelho, R.V. Rao, A chaotic quantum-behaved particle swarm approach applied to optimization of heat exchangers. Appl. Therm. Eng. 42, 119–128 (2012)
S. Mirjalili, P. Jangir, S.Z. Mirjalili, S. Saremi, I.N. Trivedi, Optimization of problems with multiple objectives using the multi-verse optimization algorithm. Knowl.-Based Syst. 134, 50–71 (2017a)
S. Mirjalili, P. Jangir, S. Saremi, Multi-objective ant lion optimizer: A multi-objective optimization algorithm for solving engineering problems. Appl. Intell. 46(1), 79–95 (2017b)
D.K. Mohanty, Application of firefly algorithm for design optimization of a shell and tube heat exchanger from economic point of view. Int. J. Therm. Sci. 102, 228–238 (2016)
O.D.L. Montaño, F.I. Gómez-Castro, C. Gutierrez-Antonio, Design and optimization of a shell-and-tube heat exchanger using the univariate marginal distribution algorithm, in Computer Aided Chemical Engineering, vol. 50, (Elsevier, 2021), pp. 43–49
V.K. Patel, R.V. Rao, Design optimization of shell-and-tube heat exchanger using particle swarm optimization technique. Appl. Therm. Eng. 30(11–12), 1417–1425 (2010)
B. Pandit, G.L. Sivakumar Babu, B. Pandit, S. Babu, Reliability analysis of rock slopes using stochastic response surface advanced technologies for post-disasters reconnaissance, forensic and environmental impact studies geotechnical view project suppots view project reliability analysis of rock slopes. (2016) https://www.researchgate.net/publication/304771896
J.M. Ponce-Ortega, M. Serna-González, A. Jiménez-Gutiérrez, Use of genetic algorithms for the optimal design of shell-and-tube heat exchangers. Appl. Therm. Eng. 29(2–3), 203–209 (2009)
M.J.G. Rad, S. Ohadi, J. Jafari-Asl, A. Vatani, S.A. Ahmadabadi, J. A. Correia, GNDO-SVR: An efficient surrogate modeling approach for reliability-based design optimization of concrete dams. In Structures 35, 722–733 (2022). Elsevier
H. Sadeghzadeh, M.A. Ehyaei, M.A. Rosen, Techno-economic optimization of a shell and tube heat exchanger by genetic and particle swarm algorithms. Energy Convers. Manag. 93, 84–91 (2015)
A.Ş. Şahin, B. Kılıç, U. Kılıç, Design and economic optimization of shell and tube heat exchangers using artificial bee colony (ABC) algorithm. Energy Convers. Manag. 52(11), 3356–3362 (2011)
R.K. Shah, D.P. Sekulic, Heat exchanger design procedures, in Fundamentals of Heat Exchanger Design, (Wiley, 2003), pp. 601–672. https://doi.org/10.1002/9780470172605.ch9
M.A. Shaik, B.V. Babu, Differential evolution for optimal design of shell-and-tube heat exchangers, in Evolutionary Computation, (Apple Academic Press, 2016), pp. 263–292
P. Singh, M. Pant, Design optimization of shell and tube heat exchanger using differential evolution algorithm, in Proceedings of the Third International Conference on Soft Computing for Problem Solving, (Springer, New Delhi, 2014), pp. 729–739
R. Smith, Chemical Process Design and Integration, 2nd edn. (Wiley, 2005)
Q. Wang, G.M. Garrity, J.M. Tiedje, J.R. Cole, Naive Bayesian classifier for rapid assignment of rRNA sequences into the new bacterial taxonomy. Appl. Environ. Microbiol. 73(16), 5261–5267 (2007)
P. Wildi-Tremblay, L. Gosselin, Minimizing shell-and-tube heat exchanger cost with genetic algorithms and considering maintenance. Int. J. Energy Res. 31(9), 867–885 (2007). https://doi.org/10.1002/er.1272
D.H. Wolpert, W.G. Macready, No free lunch theorems for optimization. IEEE Trans. Evol. Comput. 1(1), 67–82 (1997)
G.N. Xie, B. Sundén, Q.W. Wang, Optimization of compact heat exchangers by a genetic algorithm. Appl. Therm. Eng. 28(8–9), 895–906 (2008)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 Springer Nature Switzerland AG
About this entry
Cite this entry
Ohadi, S., Jafari-Asl, J., Lara Montaño, O.D., Safaeian Hamzehkolaei, N. (2023). Multi-objective Reliability-Based Design Optimization of Shell-and-Tube Heat Exchangers Using Combined Subset Simulation Method and Naive Bayes Algorithm. In: Fathi, M., Zio, E., Pardalos, P.M. (eds) Handbook of Smart Energy Systems. Springer, Cham. https://doi.org/10.1007/978-3-030-97940-9_96
Download citation
DOI: https://doi.org/10.1007/978-3-030-97940-9_96
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-97939-3
Online ISBN: 978-3-030-97940-9
eBook Packages: Business and ManagementReference Module Humanities and Social SciencesReference Module Business, Economics and Social Sciences