Summary
In its broadest definition, biomass can be described as all material that was or is a part of a living organism. For renewable energy applications, however, the definition of biomass is usually limited to include only materials that are plant-derived such as agricultural residues (e.g., wheat straw, corn stover) by-products of industrial processes (e.g., sawdust, sugar cane bagasse, pulp residues, distillers grains), or dedicated energy crops (e.g., switchgrass, sorghum, Miscanthus, short-rotation woody crops). This chapter describes analytical methods developed to measure plant components with an emphasis on the measurement of components that are important for biomass conversion. The methods described here can be viewed as a portfolio of analytical methods, with consistent assumptions and compatible sample preparation steps, selected for simplicity, robust application, and the ability to obtain a summative mass closure on most samples that accurately identifies greater than 95% of the mass of a plant biomass sample. The portfolio of methods has been successfully applied to a wide variety of biomass feedstock as well as liquid and solid fractions of both thermochemical pretreatment and enzymatic saccharification (1).
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Biomass Feedstock Composition and Property Database, a U.S/Department of Energy website designed to make data on chemical composition of various biomass resources available to energy professionals in the scientific and engineering community, http://www1.eere.energy.gov/biomass/feedstock_databases.html(September 2008)
Aden, A., et al., (2002), Lignocellulosic biomass to ethanol process design and economics utili-zing co-current dilute acid prehydrolysis and enzymatic hydrolysis for corn stover. DOE/Office of Biomass Programs Technical report NREL/TP-510–32438, National Renewable Energy Laboratory, http://www.nrel.gov
Decker, S.R., et al., (2006), Biocatalysts for biomass conversion. In: Riegel’s Handbook of Industrial Chemistry, 11th ed., Kent, J.A., Ed. Springer: New York, pp. 3–4
Hames, B.R. and Thomas, S.R., (2006), Biocatalysts for biomass conversion, Chapter 3: biomass analysis and compositional variability. In: Riegel’s Handbook of Industrial Chemistry, 11th ed., Kent, J.A., Ed. Springer: New York, pp. 6–31
MacGregor, E. A. and Greenwood, C.T., (1980), Polymers in Nature. Wiley: New York, p. 75
Sjostrom, E., (1993), Wood Chemistry: Fundamentals and Applications. Academic Press: San Diego, pp. 13–17
Biomass analysis methods are available through American Society for Testing and Materials at http://www.ASTM.org (September 2008)
Standard Laboratory Analytical Methods (LAPs) for biomass compositional analysis are available on-line at http://www.nrel.gov/biomass/analytical_procedures.html (September 2008)
Milne, T.A., Chum, H.L., Agblevor, F.A., and Johnson, D.K., (1992) Standard analytical methods, Biomass and Bioenergy, Vol. 2, nos 1–6, pp. 341–366
Standard methods of analysis are available from the TAPPI website at http://www.tappi.org/s_tappi/sec.asp?CID=2&DID=3 (September 2008)
Theander, O., (1991), Chemical analysis of lignocellulosic materials, Animal Feed Sci. Technol., Vol. 32, pp. 35–44
Milne, T.A., Brennan, A.H., and Glenn, B.H., (1990), Sourcebook of Methods of Analysis for Biomass and Biomass Conversion Processes, Elsevier: New York, p. 341
Undersander, D., et al., (2005), Sampling Hay, Silage and Total Mixed Rations for Analysis, Publication A2309, University of Wisconsin Extension website at http://www.uwex.edu/ces/crops/uwforage/Feeding.htm (September 2008)
Wiley Mill 4 Model 3375E15 available through Thomas Scientific, P.O. Box 99, Swedesboro, NJ 08085 U.S.A
Thomas, S.R., et al., (2003),Year to year variability in stover quality, US/DOE Biomass Program Milestone Report P493, available through the NREL publications database at http://www.nrel.gov/publications/ (September 2008)
Chem, S.-F., Mowery, R.A., Scarlata, C.J., and Chambliss, C.K., (2007), Compositional analysis of water-soluble materials in corn stover. J. Agric. Food Chem., Vol. 55, no. 15, pp. 5912–5918
Moreau, R.A., Powell, M.J., and Hicks, K.B., (1996), Extraction and quantitative analysis of oil from commercial corn fiber. J. Agric. Food Chem., Vol. 44, pp. 2149–2154
TAPPI Test Method T204, “Solvent extractives of wood and pulp” in TAPPI Test Methods, Published by the Technical Association of the Pulp and Paper Industry, Atlanta, GA., methods are available on-line at http://www.tappi.org/s_tappi/doc.asp?CID=107&DID=524567 (September 2008)
Yellow Springs Instruments Chemical Analyzers, Available through YSI Life Sciences, Yellow Spring, OH, http://www.ysilifesciences.com (September 2008)
TAPPI Test Method T249, Carbohydrate composition of extractive-free wood and wood pulp by gas-liquid chromatography in TAPPI Test Methods, Published by the Technical Association of the Pulp and Paper Industry, Atlanta, GA., methods are available on-line at http://www.tappi.org/s_tappi/doc.asp?CID=107&DID=524567 (September 2008)
Kaar, W.E., et al, (1991), The complete analysis of wood polysaccharides using HPLC, J. Wood Chem. Technol., Vol. 11, no. 4, pp. 447–4630
Faulds, C.B., et al., (1995), Release of ferulic acid from maize bran and derived oligosaccharides by Aspergillus niger esterases, Carbohydr. Polym., Vol. 27, pp. 187–190
Determination of structural carbohydrates and lignin in biomass, Standard Laboratory Analytical Method (LAP) available on-line at http://www.nrel.gov/biomass/analytical_procedures.html (September 2008)
AOAC Method 996.11 AACC Method 76–13 ICC Standard Method no.168 RACI Standard method for the measurement of total starch in cereal flours and food products. Megazyme Catalog Number: K-TSTA
Determination of acid soluble lignin concen-tration curve by UV-Vis spectroscopy, Standard Laboratory Analytical Method (LAP) available on-line at http://www.nrel.gov/biomass/analytical_procedures.html (September 2008)
Tkachuk, R., (1977), Calculation of the nitrogen-to-protein conversion factor. In: Nutritional Standards and Methods of Evaluation for Food Legume Breeders, Hulse, J.H., Rachie, K.O., and Billingsley, L.W. Eds. Lanham: Bernan Associates, pp. 78–82
Mossé, J., (1990), Nitrogen to protein conversion factor for 10 cereals and 6 legumes or oilseeds – a reappraisal of its definition and determination – variation according to species and to seed protein content, J. Agric. Food Chem., Vol. 38, no. 1, pp. 18–24
Calculation workbooks for use in calculating summative mass closures from the portfolio methods are available on-line at http://www.nrel.gov/biomass/analytical_procedures.html (September 2008)
Standard reference materials for the biomass portfolio methods are available through the NIST at. http://ts.nist.gov/measurementservices/referencematerials/index.cfm (September 2008)
Determination of sugars, byproducts and degradation products in liquid fraction process samples, Standard Laboratory Analytical Method (LAP) available on-line at http://www.nrel.gov/biomass/analytical_procedures.html (September 2008)
Hames, B.R., Thomas, S.R., Sluiter, A.D., Roth, C.J., and Templeton, D.W., (2003), Rapid biomass analysis. New tools for compositional analysis of corn stover feedstocks and process intermediates from ethanol production, Appl. Biochem. Biotechnol., Vol. 105–108, pp. 5–16 (Proceedings of the 24th International Symposium for the Biotechnology of Fuels and Chemicals)
DiFoggio, R., (1995) Examination of some misconceptions about near-infrared analysis, Appl. Spectrosc., Vol. 49, no. 1, pp. 67–75
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2009 Humana Press, a part of Springer Science+Business Media, LLC
About this protocol
Cite this protocol
Hames, B.R. (2009). Biomass Compositional Analysis for Energy Applications. In: Mielenz, J. (eds) Biofuels. Methods in Molecular Biology, vol 581. Humana Press, Totowa, NJ. https://doi.org/10.1007/978-1-60761-214-8_11
Download citation
DOI: https://doi.org/10.1007/978-1-60761-214-8_11
Published:
Publisher Name: Humana Press, Totowa, NJ
Print ISBN: 978-1-60761-213-1
Online ISBN: 978-1-60761-214-8
eBook Packages: Springer Protocols