Abstract
Complex geometry of plant organs and various types of organ surface deformation, including growth or hygroscopic movements, can be analyzed using sequential replica method. It enables obtaining a time-lapse series of high resolution images visualizing details of the examined surface and provides data sufficient for detailed computation of parameters characterizing surface deformation and geometry. Series of molds, made in dental polymer, representing the examined surface are used to obtain casts in epoxy resin or nail polish replicas, which are ready for microscopic examination, while the structure itself remains intact. Images obtained from the epoxy casts in scanning electron microscopy can be further used for 3D reconstruction and computation of local geometry. The sequential replica method is a universal method and can be applied to image complex shapes of a range of structures, like meristems, flowers, leaves, scarious bracts, or trichomes. Different plant species growing in various conditions can be studied.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Williams MH (1991) A sequential study of cell divisions and expansion patterns on a single developing shoot apex of Vinca major. Ann Bot 68:541–546
Williams MH, Green PB (1988) Sequential scanning electron microscopy of a growing plant meristem. Protoplasma 147:77–79
Dumais J, Kwiatkowska D (2002) Analysis of surface growth in shoot apices. Plant J 31:229–241
Routier-Kierzkowska A-L, Kwiatkowska D (2008) New stereoscopic reconstruction protocol for scanning electron microscope images and its application to in vivo replicas of the shoot apical meristem. Funct Plant Biol 35:1034–1046
de Reuille P, Routier-Kierzkowska A-L, Kierzkowski D, Bassel GW, Schüpbach T et al (2015) MorphoGraphX: A platform for quantifying morphogenesis in 4D. eLife 4:05864
Uyttewaal M, Burian A, Alim K, Landrein B, Borowska-Wykręt D et al (2012) Mechanical stress acts via katanin to amplify differences in growth rate between adjacent cells in Arabidopsis. Cell 149:439–451
Green PB, Erickson RO, Richmond PA (1970) On the physical basis of cell morphogenesis. Ann N Y Acad Sci 175:712–731
Elbaum R, Abraham Y (2014) Insight into the microstructures of hygroscopic movement in plant seed dispersal. Plant Sci 223:124–133
Borowska-Wykręt D, Rypień A, Dulski M, Grelowski M, Wrzalik R et al (2017) Gradient of structural traits drives hygroscopic movements of scarious bracts surrounding Helichrysum bracteatum capitulum. Ann Bot 119:1365–1383
Kierzkowski D, Nakayama N, Routier-Kierzkowska A-L, Weber A, Bayer E et al (2012) Elastic domains regulate growth and organogenesis in the plant shoot apical meristem. Science 335:1096–1099
Hejnowicz Z, Borowska-Wykręt D (2005) Buckling of inner cell wall layers after manipulations to reduce tensile stress: observations and interpretations for stress transmission. Planta 220:465–473
Lipowczan M, Borowska-Wykręt D, Natonik-Białoń S, Kwiatkowska D (2018) Growing cell walls show a gradient of elastic strain across their layers. J Exp Bot 69:4349–4362
Green PB, Havelange A, Bernier G (1991) Floral morphogenesis in Anagallis: Scanning-electron-micrograph sequences from individual growing meristems before, during, and after the transition to flowering. Planta 185:502–512
Andréasson E, Jørgensen LB, Höglund A-S, Rask L, Meijer J (2001) Different myrosinase and idioblast distribution in Arabidopsis and Brassica napus. Plant Physiol 127:1750–1763
Bones A, Rossiter JT (1996) The myrosinase-glucosinolate system, its organization and biochemistry. Physiol Plant 97:194–208
Elsner J, Michalski M, Kwiatkowska D (2012) Spatiotemporal variation of leaf epidermal cell growth: a quantitative analysis of Arabidopsis thaliana wild-type and triple cyclinD3 mutant plants. Ann Bot 109:897–910
Kwiatkowska D, Routier-Kierzkowska A-L (2009) Morphogenesis at the inflorescence shoot apex of Anagallis arvensis: surface geometry and growth in comparison with the vegetative shoot. J Exp Bot 60:3407–3418
Kwiatkowska D (2006) Flower primordium formation at the Arabidopsis shoot apex: quantitative analysis of surface geometry and growth. J Exp Bot 57:571–580
Acknowledgments
The sequential replica method has been developed by the late Paul B. Green and writing this chapter we have used his numerous indispensable advices that we have learnt from Dr. Jacques Dumais, the last graduate student of Paul. We would like to thank Dr. Ewa Teper (Laboratory of Scanning Electron Microscopy, Faculty of Earth Sciences, University of Silesia) for help with scanning electron microscopy, and Drs. Joanna Elsner and Aleksandra Rypień (Faculty of Biology and Environment Protection, University of Silesia) for providing SEM micrographs of leaf and bract epidermis, respectively. This work in D.K. lab was financially supported by the MAESTRO research grant No 2011/02/A/NZ3/00079 (for D.K) and the SONATA BIS6 research grant No 2016/22/E/NZ3/00342 (for A.B.) both from the National Science Centre, Poland.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Science+Business Media, LLC, part of Springer Nature
About this protocol
Cite this protocol
Kwiatkowska, D., Natonik-Białoń, S., Burian, A. (2019). Sequential Replicas: Method for In Vivo Imaging of Plant Organ Surfaces that Undergo Deformation. In: Cvrčková, F., Žárský, V. (eds) Plant Cell Morphogenesis. Methods in Molecular Biology, vol 1992. Humana, New York, NY. https://doi.org/10.1007/978-1-4939-9469-4_16
Download citation
DOI: https://doi.org/10.1007/978-1-4939-9469-4_16
Published:
Publisher Name: Humana, New York, NY
Print ISBN: 978-1-4939-9468-7
Online ISBN: 978-1-4939-9469-4
eBook Packages: Springer Protocols