Abstract
A strategy to modulate the behavior of stem cells in culture is to mimic structural aspects of the native cell–extracellular matrix (ECM) interaction. An important example of such artificial microenvironments for stem cell culture is the so-called “synthetic niche.” Synthetic niches can be defined as polymeric culture systems mimicking at least one aspect of the interactions between stem cells and the extracellular surroundings, including biochemical factors (e.g., the delivery of soluble factors) and/or biophysical factors (e.g., the microarchitecture of the ECM). Most of the currently available approaches for scaffold fabrication, based on self-assembly methods, do not allow for a submicrometer control of the geometrical structure of the substrate, which might play a crucial role in stem cell fate determination. A novel technology that overcomes these limitations is laser two-photon polymerization (2PP). Femtosecond laser 2PP is a mask-less direct laser writing technique that allows manufacturing three dimensional arbitrary microarchitectures using photosensitive materials. Here, we report on the development of an innovative culture substrate, called the “nichoid,” microfabricated in a hybrid organic–inorganic photoresist called SZ2080, to study mesenchymal stem cell mechanobiology.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Kress S, Neumann A, Weyand B et al (2012) Stem cell differentiation depending on different surfaces. Adv Biochem Eng Biotechnol 126:263–283
Nikkhah M, Edalat F, Manoucheri S et al (2012) Engineering microscale topographies to control the cell-substrate interface. Biomaterials 33(21):5230–5246
Kraehenbuehl T, Langer R, Ferreira L (2011) Three-dimensional biomaterials for the study of human pluripotent stem cells. Nat Methods 8(9):731–736
Peerani R, Zandstra P (2010) Enabling stem cell therapies through synthetic stem cell niche engineering. J Clin Invest 120(1):60–70
Joddar B, Ito Y (2013) Artificial niche substrates for embryonic and induced pluripotent stem cell cultures. J Biotechnol 106(2):218–228
Maruo S, Fourkas J (2008) Recent progress in multiphoton microfabrication. Opt Lett 2(1–2):100–111
Claeyssens F, Hasan EA, Gaidukeviciute A et al (2009) Three-dimensional biodegradable structures fabricated by two-photon polymerization. Langmuir 25(5):3219–3223
Turunen S, Käpylä E, Terzaki K et al (2011) Pico- and femtosecond laser-induced crosslinking of protein microstructures: evaluation of processability and bioactivity. Biofabrication 3(4):045002
Ovsianikov A, Malinauskas M, Schlie S et al (2011) Three-dimensional laser micro- and nano-structuring of acrylated poly(ethylene glycol) materials and evaluation of their cytoxicity for tissue engineering applications. Acta Biomater 7(3):967–974
Ovsianikov A, Mironov V, Stampfl J et al (2012) Engineering 3D cell-culture matrices: ultiphoton processing technologies for biological and tissue engineering applications. Expert Rev Med Devices 9:613–633
Raimondi MT, Eaton SM, Nava MM et al (2012) Two-photon laser polymerization: from fundamentals to biomedical application in tissue engineering and regenerative medicine. J Appl Biomater Function Mater 10(1):56–66
Danilevicius P, RekŽtyte S, Balciunas E et al (2013) Laser 3D micro-nanofabrication of polymers for tissue engineering applications. Opt Laser Technol 45:518–524
Correa DS, Tayalia P, Cosendey G et al (2009) Two-photon polymerization for fabricating structures containing the biopolymer chitosan. J Nanosci Nanotechnol 9(10):5845–5849
Malinauskas M, Danilevicius P, Baltriukiene D et al (2010) 3D artificial polymeric scaffolds for stem cell growth fabricated by femtosecond laser. Lithuan J Phys 50(1):75–82
Klein F, Richter B, Striebel T et al (2011) Two-component polymer scaffolds for controlled three-dimensional cell culture. Adv Mater 23(11):1341–1345
Koroleva A, Deiwick A, Nguyen A et al (2015) Osteogenic differentiation of human mesenchymal stem cells in 3-D Zr-Si organic-inorganic scaffolds produced by two-photon polymerization technique. PLoS One 10(2):e0118164
Marino A, Filippeschi C, Genchi GG et al (2014) The Osteoprint: a bioinspired two-photon polymerized 3-D structure for the enhancement of bone-like cell differentiation. Acta Biomater 10(10):4304–4313
Marino A, Filippeschi C, Mattoli V et al (2015) Biomimicry at the nanoscale: current research and perspectives of two-photon polymerization. Nanoscale 7(7):2841–2850
Ovsianikov A, Schlie S, Ngezahayo A et al (2007) Two-photon polymerization technique for microfabrication of CAD-designed 3D scaffolds from commercially available photosensitive materials. J Tissue Eng Regen Med 1(6):443–449
Psycharakis S, Tosca A, Melissinaki V et al (2011) Tailor-made three-dimensional hybrid scaffolds for cell cultures. Biomed Mater 6(4):045008
Tayalia P, Mendonca CR, Baldacchini T et al (2008) 3D cell-migration studies using two-photon engineered polymer scaffolds. Adv Mater 20(23):4494–4498
Terzaki K, Kissamitaki M, Skarmoutsou A et al (2013) Pre-osteoblastic cell response on three-dimensional, organic–inorganic hybrid material scaffolds for bone tissue engineering. J Biomed Mater Res Part A 101(8):2283–2294
Kapyla E, Aydogan DB, Virjula S et al (2012) Direct laser writing and geometrical analysis of scaffolds with designed pore architecture for three-dimensional cell culturing. J Micromech Microeng 22(11):115016
Raimondi MT, Eaton SM, Laganà M et al (2013) 3D structural niches engineered via two-photon laser polymerization promote stem cell homing. Acta Biomater 9(1):4579–4584
Raimondi MT, Nava MM, Eaton SM et al (2014) Optimization of femtosecond laser polymerized structural niches to control mesenchymal stromal cell fate in culture. Micromachines 5(2):341–358
Nava MM, Raimondi MT, Credi C et al (2015) Interactions between structural and chemical biomimetism in synthetic stem cell niches. Biomed Mater 10(1):015012
Ovsianikov A, Viertl J, Chichkov B et al (2008) Ultra-low shrinkage hybrid photosensitive material for two-photon polymerization microfabrication. ACS Nano 2(11):2257–2262
Killi A, Steinmann A, Dörring J et al (2005) High-peak-power pulses from a cavity-dumped Yb:KY(WO4)2 oscillator. Opt Lett 30(14):1891–1893
Malinauskas M, Farsari M, Piskarskasa A et al (2013) Ultrafast laser nanostructuring of photopolymers: a decade of advances. Phys Rep 533(1):1–31
Acknowledgments
This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement No. 646990—NICHOID). These results reflect only the authors’ view and the Agency is not responsible for any use that may be made of the information contained.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer Science+Business Media LLC
About this protocol
Cite this protocol
Nava, M.M., Zandrini, T., Cerullo, G., Osellame, R., Raimondi, M.T. (2017). 3D Stem Cell Niche Engineering via Two-Photon Laser Polymerization. In: Koledova, Z. (eds) 3D Cell Culture. Methods in Molecular Biology, vol 1612. Humana Press, New York, NY. https://doi.org/10.1007/978-1-4939-7021-6_19
Download citation
DOI: https://doi.org/10.1007/978-1-4939-7021-6_19
Published:
Publisher Name: Humana Press, New York, NY
Print ISBN: 978-1-4939-7019-3
Online ISBN: 978-1-4939-7021-6
eBook Packages: Springer Protocols