Changes implemented for new manuscripts Michel A. Aegerter Editorial 24 February 2018 Pages: 505 - 505
Preparation of tetraethoxysilane-based silica aerogels with polyimide cross-linking from 3, 3′, 4, 4′-biphenyltetracarboxylic dianhydride and 4, 4′-oxydianiline Zhifang FeiZichun YangKunfeng Li Review Paper: Sol-gel and hybrid materials for energy, environment and building applications 30 January 2018 Pages: 506 - 513
MgF2 films prepared from solvothermally treated precursor solutions Rainer JahnPeer Löbmann Original Paper: Functional coatings, thin films and membranes (including deposition techniques) 12 February 2018 Pages: 514 - 519
Carbonaceous nickel oxide composite films with homogenously dispersed metallic Ni nanoparticles by a facile sol–gel method Xiajun DongShanshan JiangYong Liu Original Paper: Functional coatings, thin films and membranes (including deposition techniques) 14 February 2018 Pages: 520 - 528
Synthesis and characterization of silver-rich coatings loaded with functionalized clay nanoparticles Hugo Fernando Giraldo MejíaRaúl Ariel ProcacciniSergio Antonio Pellice Original Paper: Functional coatings, thin films and membranes (including deposition techniques) 16 February 2018 Pages: 529 - 538
Uniform formation of mesoporous silica shell on micron-sized cores in the presence of hydrocarbon used as a swelling agent Haruyuki IshiiMitsunobu NaraMikio Konno Original Paper: Fundamentals of sol-gel and hybrid materials processing 05 February 2018 Pages: 539 - 545
Hybrid sol–gel coatings based on GPTMS/TEOS containing colloidal SiO2 and cerium nitrate for increasing corrosion protection of aluminium alloy 7075-T6 Urša TiringerIngrid MiloševYolanda Castro Original Paper: Industrial and technological applications of sol-gel and hybrid materials 30 January 2018 Pages: 546 - 557
High-temperature low-friction behaviors of γ-Fe2O3@SiO2 nanocomposite coatings obtained through sol–gel method Qunfeng ZengShuangli CaiShuangjiang Li Original Paper: Industrial and technological applications of sol-gel and hybrid materials 13 February 2018 Pages: 558 - 566
Synthesis of high-temperature resistant monolithic zirconia-based aerogel via facile water glass assisted sol–gel method Haibo GaoZhiyi ZhangZhanglian Hong Original Paper: Nano- and macroporous materials (aerogels, xerogels, cryogels, etc.) 18 January 2018 Pages: 567 - 573
First rare-earth phosphate aerogel: sol–gel synthesis of monolithic ceric hydrogen phosphate aerogel K. E. YorovT. О. ShekunovaV. K. Ivanov Original Paper: Nano- and macroporous materials (aerogels, xerogels, cryogels, etc.) 01 February 2018 Pages: 574 - 584
Selective synthesis of scheelite/perovskite CdWO4 nanoparticles: a mechanistic investigation of phase formation and property correlation H. EranjaneyaG. T. Chandrappa Original Paper: Nano-structured materials (particles, fibers, colloids, composites, etc.) 29 November 2017 Pages: 585 - 594
Correction to: Selective synthesis of scheelite/wolframite CdWO4 nanoparticles: a mechanistic investigation of phase formation and property correlation H. EranjaneyaG. T. Chandrappa Author Correction 10 February 2018 Pages: 595 - 595
Fabrication of ultra-fast humidity ZITO nanoporous sensor by sol–gel technique for dynamic situation and human breath M. MoharamzadehH. Salar AmoliS. A. Mozaffari Original Paper: Nano-structured materials (particles, fibers, colloids, composites, etc.) 18 January 2018 Pages: 596 - 609
Formation mechanism of the rutile-phase of TiO2 nanorods on Ti foil substrate by gel-calcination method C. M. MbulangaS. R. Tankio DjiokapJ. R. Botha Original Paper: Nano-structured materials (particles, fibers, colloids, composites, etc.) 18 January 2018 Pages: 610 - 620
Tuning the ferromagnetic resonance by doping strontium hexa-ferrite nanopowders Fatemeh EbrahimiFakhreddin Ashrafizadeh Original Paper: Nano-structured materials (particles, fibers, colloids, composites, etc.) 31 January 2018 Pages: 621 - 628
One-pot synthesis of porous nickel–manganese sulfides with tuneable compositions for high-performance energy storage Jianghang CaoShiying YuanHaichao Chen Original Paper: Nano-structured materials (particles, fibers, colloids, composites, etc.) 31 January 2018 Pages: 629 - 637
Natural clay attapulgite as the raw material for synthesis of Al/Ti/Mg-containing mesoporous silicates with cubic, 3D hexagonal, and lamellar mesostructures Bing GuoXiuzhen LinZhongyong Yuan Original Paper: Nano-structured materials (particles, fibers, colloids, composites, etc.) 14 February 2018 Pages: 638 - 646
Selective catalytic reduction of NO x by CO over LaMnO3 nano perovskites prepared by microwave and ultrasound assisted sol–gel method Seyed Ali HosseiniBehrouz MehriJose G. Luis Fierro Original Paper: Sol-gel and hybrid materials for catalytic, photoelectrochemical and sensor applications 05 February 2018 Pages: 647 - 656
Screening trials for the encapsulation of laccase enzymatic extract in silica sol-gel Jagpreet K. GillValerie OrsatSelim Kermasha Original Paper: Sol-gel and hybrid materials for catalytic, photoelectrochemical and sensor applications 22 January 2018 Pages: 657 - 663
Preparation and characterization of micro-spherical poly-organo-silsesquioxane immobilized ligand systems to support MoO2(acac)2 and investigation of their catalytic properties in epoxidation of alkenes Mahdi MirzaeeMasoomeh Faghani Original Paper: Sol-gel and hybrid materials for catalytic, photoelectrochemical and sensor applications 06 February 2018 Pages: 664 - 676
Preparation and characterization of the system NiMn2O4/TiO2 by sol–gel: application to the photodegradation of benzamide under visible light Gharib RekhilaYamina GabesMohamed Trari Original Paper: Sol-gel and hybrid materials for catalytic, photoelectrochemical and sensor applications 15 February 2018 Pages: 677 - 683
Evaluation of the superparamagnetic and biological properties of microwave assisted synthesized Zn & Cd doped CoFe2O4 nanoparticles via Pechini sol–gel method M. GharibshahianM. S. NourbakhshO. Mirzaee Original Paper: Sol-gel and hybrid materials for dielectric, electronic, magnetic and ferroelectric applications 19 January 2018 Pages: 684 - 692
Influence of erbium on the structural, optical and magnetic properties of sol–gel Ce: YIG films Suleiman M. ElhamaliN. B. IbrahimS. Radiman Original Paper: Sol-gel and hybrid materials for dielectric, electronic, magnetic and ferroelectric applications 20 January 2018 Pages: 693 - 702
Novel adamantane-based periodic mesoporous organosilica film with ultralow dielectric constant and high mechanical strength Guoping ZhangJiawei ZhangChingping Wong Original Paper: Sol-gel and hybrid materials for dielectric, electronic, magnetic and ferroelectric applications 14 February 2018 Pages: 703 - 711
Improving the thermoelectric performance and thermal stability of Ca3Co4O9 + δ ceramics by sintering in oxygen atmosphere Cullen BoyleLiang LiangXueyan Song Original Paper: Sol-gel and hybrid materials for energy, environment and building applications 23 January 2018 Pages: 712 - 722
Visible light photocatalytic activity of sol–gel Ni-doped TiO2 on p-arsanilic acid degradation Mónica Patricia Blanco VegaMariana Hinojosa-ReyesLaura Hinojosa-Reyes Original Paper: Sol-gel and hybrid materials for energy, environment and building applications 31 January 2018 Pages: 723 - 731
Combined redox and plasmonic electrochromic effects in WO3/ITO double-layer films Yang RenXiaoge ZhouGaoyang Zhao Original Paper: Sol-gel and hybrid materials for energy, environment and building applications 05 February 2018 Pages: 732 - 742
Preparation of dye-sensitized solar cells using template free TiO2 nanotube arrays for enhanced power conversion N. SriharanN. MuthukumarasamyMisook Kang Original Paper: Sol-gel and hybrid materials for optical, photonic and optoelectronic applications 05 February 2018 Pages: 743 - 752