NiCu-silica nanoparticles as a potential drug delivery system Janja StergarUroš MaverIrena Ban Review Paper: Sol–gel and hybrid materials for biological and health (medical) applications 16 March 2020 Pages: 493 - 504
Pervaporation membrane for desalination derived from tetraethylorthosilicate-methyltriethoxysilane Adi DarmawanLabib MunzakkaAyu Sri Wahyuni Original Paper: Functional coatings, thin films and membranes (including deposition techniques) 14 March 2022 Pages: 505 - 518
The influence of chopped PI fibers on thermal, mechanical and sound insulation properties of methylsilsesquioxane aerogels Xiaohua LiZichun YangZhifang Fei Original Paper: Nano-structured materials (particles, fibers, colloids, composites, etc.) 08 March 2022 Pages: 519 - 528
Anti-stain and durable superhydrophobic/antistatic dual functionality surface for fabric materials based on F-ZnO/TiO2 composite C. A. ThennakoonR. B. S. D. RajapaksheSanath Rajapakse original paper: Nano-structured materials (particles, fibers, colloids, composites, etc.) 22 February 2022 Pages: 529 - 538
Impact of Cd2+ substitution on the structural and magnetic peculiarities of MnZn nanospinel ferrites M. Sertkol Original Paper: Nano-structured materials (particles, fibers, colloids, composites, etc.) 19 February 2022 Pages: 539 - 545
Magnetic properties and hyperthermia action of cobalt zinc ferrite fibers Suman KumariMurli Kumar ManglamManoranjan Kar Original Paper: Nano-structured materials (particles, fibers, colloids, composites, etc.) 23 February 2022 Pages: 546 - 561
Preparing high chroma colored silica nanoparticles based on layer-by-layer self-assembled technique Zixian SuGuangying ZhaoWenchao Dou Original Paper: Nano-structured materials (particles, fibers, colloids, composites, etc.) 23 May 2020 Pages: 562 - 570
Preparation of PVA/starch hydrogel and its in-vitro drug release potential against pus-inducing pathogenic strain and breast cancer cell line P. SankarganeshV. ParthasarathyN. Udayakumari Original Paper: Sol-gel and hybrid materials for biological and health (medical) applications 09 March 2022 Pages: 571 - 578
Sol–gel preparation of NixCu1–x/silica nanocomposites using different silica precursors Matjaž KristlIrena BanJanja Stergar Original Paper: Sol-gel and hybrid materials for biological and health (medical) applications 18 June 2020 Pages: 579 - 587
Magnetic properties and magnetism simulation of SmFe0.5Cr0.5O3 nanoparticles prepared by sol-gel method Lebin LiuJiajun MoMin Liu Original Paper: Sol-gel and hybrid materials for dielectric, electronic, magnetic and ferroelectric applications 22 March 2022 Pages: 588 - 595
Dielectric, impedance, and modulus spectroscopic studies of lanthanum-doped nickel spinel ferrites NiLaxFe2-xO4 nanoparticles Ghulam MustafaMuhammad KhalidH. M. Noor ul Huda Khan Asghar Original Paper: Sol-gel and hybrid materials for dielectric, electronic, magnetic and ferroelectric applications 31 July 2020 Pages: 596 - 605
Properties of Al3+ substituted nickel ferrite (NiAlxFe2-xO4) nanoparticles synthesised using wet sol-gel auto-combustion Junaid Kareem KhanMuhammad KhalidZaheer Abbas Gilani Original Paper: Sol-gel and hybrid materials for dielectric, electronic, magnetic and ferroelectric applications 10 November 2020 Pages: 606 - 617
Adsorption efficiency of sol–gel derived nano metal ferrites, MFe2O4 (M = Ni, Zn, Cu) on the removal of Cr (VI) ions from aqueous solution Thanooja NizamMariyam ThomasAruna Joseph Original Paper: Sol-gel and hybrid materials for energy, environment and building applications 17 February 2022 Pages: 618 - 629
Improvement of the environmental stability of sol-gel silica anti-reflection coatings Lin HuangHongwei YanYujie Qian Original Paper: Sol-gel and hybrid materials for optical, photonic and optoelectronic applications 07 March 2022 Pages: 630 - 636
Structure and optical properties of nano-ZnMn2O4/CuS solid solution heterostructure Zein K. HeibaMohamed Bakr MohamedAli Badawi Original Paper: Sol-gel and hybrid materials for optical, photonic and optoelectronic applications 15 March 2022 Pages: 637 - 648
Inorganic-organic hybrid polymers for printing of optical components: from digital light processing to inkjet 3D-printing Matthias KleinSönke SteenhusenPeer Löbmann Original Paper: Sol-gel and hybrid materials for optical, photonic and optoelectronic applications Open access 16 March 2022 Pages: 649 - 654
Dip-coating sol–gel preparation and characterization of Rhodamine 6G-doped nanostructured TiO2 thin films on structural and spectroscopic properties Majida A. AmeenMuhammad A. SaeedAras S. Mahmood Original Paper: Sol–gel and hybrid materials for optical, photonic and optoelectronic applications 08 March 2022 Pages: 655 - 671
Superhydrophobic ZnO thin film modified by stearic acid on copper substrate for corrosion and fouling protections Milad Abdolahzadeh SaffarAkbar EshaghiMohammad Reza Dehnavi Original Paper: Sol-gel and hybrid materials with surface modification for applications 11 March 2022 Pages: 672 - 682