Nanoscale Reciprocating Sliding Contacts of Textured Surfaces: Influence of Structure Parameters and Indentation Depth
Authors
This is part of 1 collection:
Volume 31, issue 1, December 2018
112 articles in this issue
-
-
Structural Synthesis of Parallel Mechanisms with High Rotational Capability
Authors (first, second and last of 4)
This is part of 1 collection:
-
Performance Analysis and Improvement of Flat Torque Converters Using DOE Method
Authors
This is part of 1 collection:
-
-
City-Bus-Route Demand-based Efficient Coupling Driving Control for Parallel Plug-in Hybrid Electric Bus
Authors (first, second and last of 4)
This is part of 1 collection:
-
Noise Reduction of an Axial Piston Pump by Valve Plate Optimization
Authors
This is part of 1 collection:
-
Plastic Deformation Mechanism in Double-Roller Clamping Spinning of Flanged Thin-Walled Cylinder
Authors
This is part of 1 collection:
-
Design and Analysis for a Three-Rotational-DOF Flight Simulator of Fighter-Aircraft
Authors
This is part of 1 collection:
-
Analysis and Optimization of a Spatial Parallel Mechanism for a New 5-DOF Hybrid Serial-Parallel Manipulator
Authors (first, second and last of 4)
-
Experimental Investigation on Cooling/Heating Characteristics of Ultra-Thin Micro Heat Pipe for Electric Vehicle Battery Thermal Management
Authors (first, second and last of 4)
This is part of 1 collection:
-
Experimental Study on Wear Performance and Oil Film Characteristics of Surface Textured Cylinder Liner in Marine Diesel Engine
Authors (first, second and last of 4)
This is part of 1 collection:
-
3D Progressive Damage Based Macro-Mechanical FE Simulation of Machining Unidirectional FRP Composite
Authors
-
Parameter Optimization of a Stability-Training Platform’s 4-PSS/PS Parallel Mechanism Based on Training Ability Evaluation Index and PSO Algorithm
Authors
This is part of 1 collection:
-
-
Influence of Endwall Boundary Layer Suction on the Flow Fields of a Critically Loaded Diffusion Cascade
Authors
This is part of 1 collection:
-
Reliability Assessment for the Solenoid Valve of a High-Speed Train Braking System under Small Sample Size
Authors (first, second and last of 4)
This is part of 1 collection:
-
Modification of Roll Flattening Analytical Model Based on the Plane Assumption
Authors (first, second and last of 4)
This is part of 1 collection:
-
An Experimental Study of Features Search under Visual Interference in Radar Situation-Interface
Authors
This is part of 1 collection:
-
A Finite and Instantaneous Screw Based Approach for Topology Design and Kinematic Analysis of 5-Axis Parallel Kinematic Machines
Authors (first, second and last of 4)
This is part of 1 collection:
-
Parameters Sensitivity Characteristics of Highly Integrated Valve-Controlled Cylinder Force Control System
Authors (first, second and last of 7)
This is part of 1 collection:
-
Light-Weight Design Method for Force-Performance-Structure of Complex Structural Part Based Co-operative Optimization
Authors (first, second and last of 4)
This is part of 1 collection:
-
-
Fault Feature Extraction of Diesel Engine Based on Bispectrum Image Fractal Dimension
Authors (first, second and last of 5)
This is part of 1 collection:
-
An Error Equivalent Model of Revolute Joints with Clearances for Antenna Pointing Mechanisms
Authors
This is part of 1 collection:
-
Optimization of Uncertain Structures with Interval Parameters Considering Objective and Feasibility Robustness
Authors (first, second and last of 6)
This is part of 1 collection:
-
Design by Analogy: Achieving More Patentable Ideas from One Creative Design
Authors (first, second and last of 4)
This is part of 1 collection:
-
-
Configuration Design of an Under-Actuated Robotic Hand Based on Maximum Grasping Space
Authors (first, second and last of 5)
This is part of 1 collection:
-
Personalization for Massive Product Innovation Using Open Architecture
Authors (first, second and last of 4)
This is part of 1 collection:
-
Design and Experiment of Triangular Prism Mast with Tape-Spring Hyperelastic Hinges
Authors (first, second and last of 5)
This is part of 1 collection:
-
Vibration Response and Stress Analysis of Planar Elastic Tube Bundle Induced by Fluid Flow
Authors (first, second and last of 4)
This is part of 1 collection:
-
Optimization Design and Performance Analysis of Vehicle Powertrain Mounting System
Authors (first, second and last of 4)
This is part of 1 collection:
-
Quasi-Static and Dynamic Behaviors of Helical Gear System with Manufacturing Errors
Authors (first, second and last of 4)
This is part of 1 collection:
-
Effect of Degree-of-Symmetry on Kinetostatic Characteristics of Flexure Mechanisms: A Comparative Case Study
Authors (first, second and last of 4)
This is part of 1 collection:
-
Active Profiling and Polishing Model and Validation Based on Rotor Spiral Groove
Authors (first, second and last of 4)
This is part of 1 collection:
-
Application of Fractal Contact Model in Dynamic Performance Analysis of Gas Face Seals
Authors (first, second and last of 4)
This is part of 1 collection:
-
Analysis of the Load-Stress Response Characteristics of the Bogie Frame in Intercity Electric Multiple Unit
Authors (first, second and last of 4)
This is part of 1 collection:
-
Fuzzy Sliding Mode Control for the Vehicle Height and Leveling Adjustment System of an Electronic Air Suspension
Authors (first, second and last of 5)
This is part of 1 collection:
-
Life Distribution Transformation Model of Planetary Gear System
Authors (first, second and last of 4)
This is part of 1 collection:
-
Numerical Simulation and Experimental Verification of the Stiffness and Stability of Thrust Pad Aerostatic Bearings
Authors (first, second and last of 5)
-
New Immersed Boundary Method on the Adaptive Cartesian Grid Applied to the Local Discontinuous Galerkin Method
Authors (first, second and last of 4)
This is part of 1 collection:
-
Leakage and Stiffness Characteristics of Bionic Cluster Spiral Groove Dry Gas Seal
Authors (first, second and last of 4)
This is part of 1 collection:
-
On Modeling Drilling Load in Lunar Regolith Simulant
Authors (first, second and last of 5)
This is part of 1 collection:
-
Model Based Adaptive Control and Disturbance Compensation for Underwater Vehicles
Authors (first, second and last of 6)
This is part of 1 collection:
-
Sealing Performance and Optimization of a Subsea Pipeline Mechanical Connector
Authors (first, second and last of 5)
This is part of 1 collection:
-
Coordinate Control, Motion Optimization and Sea Experiment of a Fleet of Petrel-II Gliders
Authors (first, second and last of 4)
This is part of 1 collection:
-
Fabrication of Microlens Array and Its Application: A Review
Authors (first, second and last of 4)
This is part of 1 collection:
-
-
Symmetric Equations for Evaluating Maximum Torsion Stress of Rectangular Beams in Compliant Mechanisms
Authors
This is part of 1 collection:
-
Design of Accelerated Life Test Plans—Overview and Prospect
Authors (first, second and last of 5)
This is part of 1 collection:
