Abstract
Abstract
The distinctive properties of graphene, characterized by its high carrier mobility and biocompatibility, have stimulated extreme scientific interest as a promising nanomaterial for future nanoelectronic applications. In particular, graphene-based transistors have been developed rapidly and are considered as an option for DNA sensing applications. Recent findings in the field of DNA biosensors have led to a renewed interest in the identification of genetic risk factors associated with complex human diseases for diagnosis of cancers or hereditary diseases. In this paper, an analytical model of graphene-based solution gated field effect transistors (SGFET) is proposed to constitute an important step towards development of DNA biosensors with high sensitivity and selectivity. Inspired by this fact, a novel strategy for a DNA sensor model with capability of single-nucleotide polymorphism detection is proposed and extensively explained. First of all, graphene-based DNA sensor model is optimized using particle swarm optimization algorithm. Based on the sensing mechanism of DNA sensors, detective parameters (Ids and Vgmin) are suggested to facilitate the decision making process. Finally, the behaviour of graphene-based SGFET is predicted in the presence of single-nucleotide polymorphism with an accuracy of more than 98% which guarantees the reliability of the optimized model for any application of the graphene-based DNA sensor. It is expected to achieve the rapid, quick and economical detection of DNA hybridization which could speed up the realization of the next generation of the homecare sensor system.
Avoid common mistakes on your manuscript.
Background
With the discovery of graphene, a single atomic layer of graphite, material science has been experiencing a new path in biomedical applications, due to its fascinating properties [1]. Graphene possess extraordinary physical properties, such as a unique electronic band structure, extremely high carrier mobility, biocompatibility and well-known two-dimensional (2D) structure exposing every atom of graphene to the environment [1–3]. It is demonstrated that the high sensitivity of graphene to the charged analytes (ions, DNA, cells, etc.) or an electric field around it renders graphene an ideal material for high-performance sensors. In the last 5 years, there has been an increasing amount of literature on solution-gated field effect transistors (SGFETs) as useful candidates for chemical and biological sensors [4, 5]. The interface between nanomaterials and biosystems is emerging as one of the most interesting areas of intense research [6]. Recent advances and key issues for the development of DNA sensors to bridge the knowledge to clinical detection of DNA hybridization emerged as a promising means of diagnostic prediction in genetic research [7, 8]. The aim of this paper is to provide a possibility of having more sensitive and sequence-selective DNA biosensors by developing the SGFETs analytical model for electrical detection of DNA molecules [9, 10]. Graphene layer is selected as a sensing template because of its large surface-to-volume ratio which guarantees better physical adsorption of DNA due to more accessible contact, compared with other carbon materials [11].
Several numbers of research on the basic of field effect devices for DNA detection have been published in recent years. There are different configurations of DNA sensors such as electrolyte-silicon (ES) structures, depletion and enhancement-mode field effect transistor (FET), with or without a reference electrode [1, 12–20]. The focus of this theoretical study will be on developing the DNA sensor-based graphene nanomaterials which have become extremely important for diagnosis and treatment of the gene-related diseases [21, 22]. As depicted in Figure 1, SGFET-based DNA sensor structure consists of a 300-nm SiO2 layer as a back gate dielectric and a doped silicon substrate used as the back gate has been proposed [2]. Graphene layer as a conducting channel connected to the source and drain electrodes. The possibility of having channels that are just one atomic layer thick is perhaps the most attractive feature of graphene for transistors [23]. An Ag/AgCl wire was inserted into the solution chamber and acted as the gate electrode of a SGFET which controls the current along the graphene sheet between the two electrodes [24, 25]. The DNA sensors were exposed to a phosphate buffer solution (PBS) containing the DNA molecules.
It is noteworthy to explain the DNA adsorption effect on nanomaterials of graphene surface as well as the proposed model. In graphene, the electronic transport takes place by hopping along π orbitals which is due to the sp2 hybridized covalent bonds that held the carbon atoms together, while each of them can participate in some kind of bonding with adsorbates [26]. Theoretical data suggest that the bonding between the DNA bases and the carbon atoms is a kind of van der Waals (vdW) bonding (π-π stacking) [27, 28]. Since the DNA molecules have the negative charges, therefore, it could be expected that the adsorption of DNA molecules on graphene surface would directly modulate the drain current of the SGFET device [29, 30]. Based on the detection mechanism, we recently proposed an analytical model for the detection of DNA molecules in which the DNA concentration was modelled by a gate voltage [2].
Although there are lots of works presented on the experimental progress, however, far too little attention has been paid to the detection mechanism quantitatively. For supporting this, modelling and simulation using partial differential equations (PDE) play a critical role in determining the current-voltage characteristics, sensitivity and the behaviour of the sensing devices exposing to DNA molecules. Our proposed model is capable of performing the electrical detection of DNA molecules by modelling the conductance of the graphene sheets. Based on the sensing mechanism inspired by the experiment to investigate the effect of DNA adsorption on graphene, DNA concentration as a function of gate voltage is assumed and sensing factor (α) is defined. High carrier mobility reported from experiments in the graphene leads to assume a completely ballistic carrier transportation in the graphene [31]. Subsequently, FET modelling was employed to obtain relevance between current versus voltage of gate sensor. The DNA concentration model is employed as a function of gate voltage and the ideal current-voltage relation for the n-channel FET in the non-saturation region from reference [32] is obtained as:
Where q is the electron charge, a = 1.42Å denotes carbon-carbon (C - C) bond length, t = 2.7 eV is the nearest neighbour C - C tight binding overlap energy, k B is the Boltzmann’s constant, T represents temperature and h is the Planck’s constant. L shows the length of conducting channel, Vgs donates the gate-source voltage and Vt refers to the threshold voltage. Furthermore, ȷ-0.5(η) and ȷ-0.5(-η) are the Fermi-Dirac integrals of orders -0.5 which can be solved numerically. Its value depends on η which measures the location of the Fermi level with respect to the conduction band edge. The Fermi-Dirac distribution function has different forms in degenerate and non-degenerate states which are attributed by (η ≫ 0) and (η ≪ 0), respectively [5, 32]. α is DNA sensing factor and different concentration of DNA molecules were presented in the form of F parameter. Thus, the DNA molecules adsorbed on graphene surface by iteration method was modelled as
A = 13, B = 50 and C = 4,070 are the parameters calculated based on the extracted data. The current-voltage characteristic of SGFET according to the proposed model of DNA sensor using nanostructured graphene layer is obtained as:
It is concluded that the sensor model with the suggested parameters represents the same trend as experimental data [2, 6]. Since the values of the parameters A, B and C in Equation 2 were calculated based on trial and error, there is necessity of a methodological approach for obtaining a viable and accurate model which is reliable for being used in different applications of the graphene-based DNA sensor. To this purpose, an evolutionary algorithm (EA) called particle swarm optimization (PSO) is used for optimizing the mathematical model shown in Equation 1. The PSO technique is widely used in optimizing different sorts of problems including fine materials, medical science, control theory, energy issues, etc. [33–36]. The important facts that make PSO popular among the researchers are its fastness, avoiding from being trapped in the local optima, and the capability of being employed in any type of optimization problems [37–40].
Methods
Particle swarm optimization overview
The PSO is a swarm-based optimization algorithm which is classified as a metaheuristic optimization algorithm. The idea of the PSO rises from the movement of a bird flock which was first introduced by Kennedy and Eberheart [41–45]. The aim of employing PSO algorithm in this study, is to find the best possible values for A, B and C parameters in Equation 2 which leads to have a more accurate DNA sensor model with better I-V characteristic. Each particle at each step is supposed to return a set of three values with respect to A, B and C parameters. Afterwards, these values must be evaluated using a proper fitness function. During the optimization process, the values of A, B and C parameters change, until we can get the best possible solutions.
The movement velocity of each particle is updated regularly, at each step. The location and velocity of the i th particle at k th step are shown in Equations 4 and 5, respectively.
i = 1, 2, …, nop (number of particles); k = 1, 2, …, kmax (maximum iteration number) where i is the particle number; k is the iteration number; W refers to the inertia weight coefficient which is decreased continuously from 1.2 to 0.5, r1 and r2 are random values between 0 and 1, c1 and c2 are acceleration coefficients and set to be equal to 2, denotes the position and is the velocity of particle i at iteration k.
There are some social parameters that lead the swarm to the global optimum of the search space which are personal best (Pbest) and global best (Gbest). There is one Pbest for each particle which is the best location experienced by it, while Gbest is the best global optimum point found by the swarm. A simple diagram of the movement of a particle is shown in Figure 2. The number of particles in the swarm is considered as 200 which iterate for 300 runs.
A fitness function must be defined for evaluating the particles at each step. Therefore, there is a fitness value for each particle at each step. In this study, the chosen fitness function is shown in Equation 6 which calculates an error value between the real and modelled data.
where I(k) is the experimental waveform of the DNA sensor, represents the value of the modelled waveform for particle i and ψ i is the fitness value for the i th particle. Obviously, the lowest fitness value represents the most fitted curve which is desired for a reliable DNA sensor model.
Results and discussion
Results of optimization for DNA sensor model
The parameters to be optimized in this model were A, B and C in Equation 2 which create a solution space of four dimensions with three variables and one function known as fitness function. The best results obtained out of 20 runs are shown in Table 1 which introduce the lowest fitness values.
The experimental waveform of the DNA sensor is used for obtaining the optimized values for parameters A, B and C. The optimized model and the experimental waveforms are shown in Figure 3.
The mean absolute percentage error (MAPE) index is used to assess the quality of the modelled waveform (see Equation 7).
The optimized model is evaluated using the MAPE index for different concentrations of the DNA sensor. Table 2 shows the accuracy of the proposed optimized model for six different concentrations of the DNA sensor covering a range from 0.01 to 500 nM. The lowest accuracy obtained is 98.46% for the concentration of 0.01 nM while the highest accuracy is 99.41% belonging to the concentration of 100 nM. Overall, the accuracy of more than 98% represents an overall error of less than 2% which is quite acceptable for the optimized model.
In the next section, it is demonstrated that the optimized model of solution-gated graphene-based DNA sensors can be utilized for electrical detection of DNA hybridization application.
DNA hybridization detection using the optimized model
The detection of DNA hybridization has been a topic of central importance owing to a wide variety of applications such as diagnosis of pathogenic and genetic disease, gene expression analysis and the genotyping of mutations and polymorphisms [46, 47]. Technologies in DNA biosensing [48] have received special appeal not only for their low cost and simplicity but also for their ultimate capabilities in detecting single-nucleotide polymorphisms (SNP) which have been correlated to several diseases and genetic disorders such as Alzheimer and Parkinson diseases. The DNA hybridization event is the basis of many existing DNA detection techniques. In DNA hybridization as depicted in Figure 4, the target, unknown single-stranded DNA (ssDNA), is identifid and formed by a probe ssDNA and a double-stranded (dsDNA) helix structure with two complementary strands. It is believed that, in the presence of a mixture of diverse non-complementary nucleic acids, the hybridization reaction is known to be extremely efficient and specific. The basis for the high specificity of the biorecognition process is the uniqueness of complementary nature of this binding reaction between the base pairs, i.e. adenine-thymine and cytosine-guanine.
There are still inadequate experimental results and accurate theoretical models of SGFET devices incubated in DNA solutions which are able to explain their detection mechanism and source of the experimentally observed signal generation. In this paper, SGFET-based optimized models are employed as detectors of DNA immobilization and hybridization. The proposed model describes the behaviour of the SGFETs device to detect the hybridization of target DNAs to the probe DNAs pre-immobilized on graphene with capability to distinguish single-base mismatch. The methodology of this study is presented for diagnosis of the SNP which uses an optimized model of graphene-based DNA sensor. This detection concept starts with showing the current-voltage characteristic of the SGFET-based DNA sensor before adding any DNA molecule (bare sensor), as shown in Figure 5. In the experiment, the SGFET devices must be washed with (40 µL) phosphate buffer (PB) to measure the dependence of conductance versus gate voltage [6]. Next step is continued by assuming that our optimized model is capable of differentiating between complementary and single-based mismatched DNAs which is an important characteristic with regard to the analysis of mutations and polymorphisms [49]. To address this possibility, SGFETs devices have been exposed to the ssDNA capture probes [50].
As shown in Figure 5, by applying the gate voltage to the DNA solution, it is obviously affirmed that the conductance of SGFET shows amipolar behaviour since the Fermi energy can be controlled by the gate voltage. Based on this outstanding characteristic, it is notable that the graphene can continuously be switched from the p-doped to the n-doped region by a controllable gate voltage. At the transition point where the density of electron and hole are the same, the minimum conductance (Vgmin) is detected. This conjunction point is called charge neutrality point (CNP). The doping states of graphene have been monitored by the Vg,min to measure the minimum conductance of the graphene layer which is identified from the transfer characteristic curve.
It can be seen in Figure 5 that by immobilization of the probe DNAs, either complementary or mismatch, on the graphene surface, the Vg,min is considerably left-shifted by 10 mV. This fact can demonstrate the dependency of Vg,min on the immobilization of the probe DNA and hybridization of the complementary target DNAs. In other words, DNA molecules as n-dopants, shift the gate voltage leftwards due to the fact that DNA molecules n-dopes the graphene layer [6]. By introduction of DNAs as electron-rich molecules, the number of carriers would change in the graphene channel which has led in varying the conductance of source and drain [51–53]. SGFETs with high sensitivity is applied to detect the DNA hybridization based on the conductance variations. Finally, the hybridization event has been performed by introducing complementary sequences which include the target sequence of the probe DNA immobilized graphene device [54].
As illustrated in Figure 6, the electronic responses of the SGFETs upon single-stranded DNA immobilization are compared with experimental results of subsequent DNA hybridization events [55]. Fascinatingly, single-base mismatch combination is occurring with the introduction of the non-complementary DNAs to the immobilized capture probe on SGFET device which results in no significant change in device characteristic which means conductance will be remained unchanged in this case. When the probe molecules expose to the target which is a mismatched DNA (non-complimentary) in this step, there is no bonding reaction between two pairs of DNA strands since they cannot hybrid because of the presence of mismatched base pair as illustrated in Figure 4. So there are no associated charges with the target molecule that can impose an obvious change to the applied gate voltage. It can also be seen that the SGFET device specifically recognizes the target DNA sequences. In light of this fact, the focus of this paper is to present a new strategy for DNA sensor with the capability of detection of SNP. According to the optimized model of SGFET-based DNA sensor using PSO algorithm, by substituting α = 2.138e10F2 + 8.9921e9F - 5.680e3 in Equation 1, the current-voltage characteristic of DNA sensor for detection of probe (F = 1, 000 nM) is:
By employing the abovementioned equation, the I d -V g characteristic of the optimized model is illustrated in Figure 5 and an acceptable agreement with the experimental data extracted from reference [49] is achieved. Figure 7 describes the I d - V g characteristic of the proposed model as well as the relevant experimental data for different concentrations of complementary DNA, where each diagram depicts specific concentration of the DNA molecules.
According to the experimental data, two important factors as detective parameters (Ids,Vgmin) play crucial roles in detecting the DNA hybridization events. Whenever complementary DNA molecules are introduced to the sensor, these parameters will vary and decision will be made based on these variations. Table 3 can give us an idea about how Ids and Vgmin parameters change with different concentration of complementary DNA molecules which reveals the sensitivity of Vg,min towards the hybridization of the target DNAs.
It is apparently seen that the considerable decrease of conductance is a sign of probe-target matching combination in DNA hybridization. The experimental data indicates the strong dependency of the gate voltage on the concentration increment which can have a predictable influence on the current-voltage characteristics of SGFET device. In other words, the I d shifts downwards while the gate voltage shifts leftwards.
The complementary DNAs also successfully attach to the graphene surface through graphene-nucleotide interaction and impose n-doping effect which results as the left shift of Vg,min after DNA hybridization. It is stated that the stacking interaction between nucleotide and graphene surface upon DNA hybridization has a strong influence on Vg,min, which can shift it leftwards [52]. This phenomena describes that the transfer of electrons from the target DNA happens because the probe DNA brings it to the proximity of the graphene surface [6]. In addition to the Vg,min shift, the I d experiences a current decrease from 4.7 to 4.1 amp at Vg = -0.5v. Furthermore, when DNA molecule is present, the I d continues to decrease with concentration increment of complementary DNAs. This fact can be explained by the p-type behaviour of graphene in the FET structure as observed by [56–59], which can justify the current decrease upon DNA hybridization event. While graphene is known as a p-type semiconductor with the holes as a majority of carriers, the electrons from DNA will lower the carrier concentration of graphene and hence reduce the conductance. By increasing the amount of complementary DNA concentration, more DNAs will make the configurational change and cause more electrons being trapped on the surface. The current or conductance shows a steady drop off at V g = -0.5v.
Similar results had been reported for unfunctionalized graphene [59], where a larger current decrease was observed. The amount of shift rises with the increasing concentration of the complementary DNA from 1 to 10 nM as stated by experimental data [60]. The amount of these changes would determine that the hybridization event occurred in the presence of complementary or non-complementary DNA. For clarifying this condition, and are introduced as the representatives of the source-drain current at voltage of Vgmin = -0.5v and the gate-voltage changes during hybridization events, respectively. The following equations describe the selected parameters:
where ID probe is the drain current of probe DNA molecule, IDF denotes drain current in a specific DNA concentration, Vgmin probe represents the minimum gate voltage of probe DNA molecule while Vgmin F shows its concentration. The experimental data has to be obtained from the sample. In the next step, detective parameters should be extracted (Vgmin probe, Ids|Vgs = -0.5) for probe and target DNA as well to calculate the Δ Imin and Δ Vgmin values. To make a decision from the obtained results, Table 4 is prepared and can be utilized.
Conclusion
Due to the outstanding properties of graphene nanomaterial such as high surface area, electrical conductivity and biocompatibility, it has remarkable potential for DNA and protein detection as a biosensing material. The detection of DNA hybridization is currently an area of intense interest whereas recent studies have proved that the mutations of genes are responsible for numerous inherited human disorders. In this research, graphene is chosen as both a sensing layer and a conducting channel in solution-gated field effect transistors for detection of DNA hybridization. In order to facilitate the rational design and the characterization of these devices, a DNA sensor model using particle swarm optimization theory developed and applied for detection of DNA hybridization. Furthermore, our proposed model is capable of detecting the single-nucleotide polymorphism by suggesting the detective parameters (Ids and Vgmin). Finally, the behaviour of solution-gated field effect transistor-based graphene is compared by the experiment results. An accuracy of more than 98% is reported in this paper which guarantees the reliability of an optimized model for any application of the graphene-based DNA sensor such as diagnosis of genetic and pathogenic deseases.
References
Yan eF, Zhang M, Li J: Solution-gated graphene transistors for chemical and biological sensors. Healthc Mater 2013. [http://dx.doi.org/10.1002/adhm.201300221] []
Dong X, Zhao X, Wang L, Huang W: Synthesis and application of graphene nanoribbons. Curr Phys Chem 2013, 3(3):291–301. 10.2174/1877946811303030006
Chen F, Qing Q, Xia J, Tao N: Graphene field-effect transistors: electrochemical gating, interfacial capacitance, and biosensing applications. Chemistry-an Asian J 2010, 5(10):2144–2153. 10.1002/asia.201000252
Sohn IY, Kim DJ, Jung JH: Ja Yoon O, Thanh Tien N, Quang Trung T, Lee NE: pH sensing characteristics and biosensing application of solution-gated reduced graphene oxide field-effect transistors. Biosens Bioelectron 2013, 45: 70–76.
Kiani MJ, Ahmadi MT, Abadi HKF, Rahmani M, Hashim A: Analytical modelling of monolayer graphene-based ion-sensitive FET to pH changes. Nanoscale Res Lett 2013, 8: 1–9. 10.1186/1556-276X-8-1
Dong X, Shi Y, Huang W, Chen P, Li L: Electrical detection of DNA hybridization with single base specificity using transistors based on CVD grown graphene sheets. Adv Mater 2010, 22(14):1649–1653. 10.1002/adma.200903645
Lee SJ, Youn BS, Park JW, Niazi JH, Kim YS: Gu MB: ssDNA aptamer-based surface plasmon resonance biosensor for the detection of retinol binding protein 4 for the early diagnosis of type 2 diabetes. Anal Chem 2008, 80(8):2867–2873. 10.1021/ac800050a
Liu AL, Zhong GX, Chen JY, Weng SH, Huang HN, Chen W, Lin LQ, Lei Y, Fu FH: Sun Zl: A sandwich-type DNA biosensor based on electrochemical co-reduction synthesis of graphene-three dimensional nanostructure gold nanocomposite films. Anal Chimica Acta 2013, 767: 50–8.
Singh V, Joung D, Zhai L, Das S, Khondaker SI, Seal S: Graphene based materials: past, present and future. Prog Mater Sci 2011, 56(8):1178–1271. 10.1016/j.pmatsci.2011.03.003
Shao Y, Wang J, Wu H, Liu J, Aksay IA, Lin Y: Graphene based electrochemical sensors and biosensors: a review. Electroanal 2010, 22(10):1027–1036. 10.1002/elan.200900571
Zheng M, Jagota A, Semke ED, Diner BA, McLean RS, Lustig SR, Richardson RE, Tassi NG: DNA-assisted dispersion and separation of carbon nanotubes. Nat Mater 2003, 2(5):338–342. 10.1038/nmat877
Souteyrand E, Cloarec J, Martin J, Wilson C, Lawrence I, Mikkelsen S, Lawrence M: Direct detection of the hybridization of synthetic homo-oligomer DNA sequences by field effect. J Phys Chem B 1997, 101(15):2980–2985. 10.1021/jp963056h
Fritz J, Cooper EB, Gaudet S, Sorger PK, Manalis SR: Electronic detection of DNA by its intrinsic molecular charge. Proc Nat Acad Sci 2002, 99(22):14142–14146. 10.1073/pnas.232276699
Wei F, Sun B, Guo Y, Zhao XS: Monitoring DNA hybridization on alkyl modified silicon surface through capacitance measurement. Biosens Bioelectron 2003, 18(9):1157–1163. 10.1016/S0956-5663(03)00002-2
Abouzar MH, Poghossian A, Cherstvy AG, Pedraza AM, Ingebrandt S, Schoening MJ: Label-free electrical detection of DNA by means of field-effect nanoplate capacitors: experiments and modeling. Physica Status Solidi a-Applications Mater Sci 2012, 209(5):925–934. 10.1002/pssa.201100710
Kim DS, Jeong YT, Park HJ, Shin JK, Choi P, Lee JH, Lim G: An FET-type charge sensor for highly sensitive detection of DNA sequence. Biosens Bioelectron 2004, 20: 69–74. 10.1016/j.bios.2004.01.025
Kim DS, Park HJ, Jung HM, Shin JK, Choi P, Lee JH, Lim G: Field effect transistor-based bimolecular sensor employing a Pt reference electrode for the detection of deoxyribonucleic acid sequence. Jpn J Appl Phys 2004, 43(6B):3855–3859. [http://jjap.jsap.jp/link?JJAP/43/3855/] [] 10.1143/JJAP.43.3855
Uslu F, Ingebrandt S, Mayer D, Böcker-Meffert S, Odenthal M, Offenhäusser A: Labelfree fully electronic nucleic acid detection system based on a field-effect transistor device. Biosens Bioelectron 2004, 19(12):1723–1731. 10.1016/j.bios.2004.01.019
Berney H, West J, Haefele E, Alderman J, Lane W, Collins J: A DNA diagnostic biosensor: development, characterisation and performance. Sensors and Actuators B: Chem 2000, 68: 100–108. 10.1016/S0925-4005(00)00468-8
Pouthas F, Gentil C, Côte D, Bockelmann U: DNA detection on transistor arrays following mutation-specific enzymatic amplification. Appl Phys Lett 2004, 84(9):1594–1596. 10.1063/1.1650907
Sassolas A, Leca-Bouvier BD, Blum LJ: DNA biosensors and microarrays. Chem Rev 2008, 108: 109–139. 10.1021/cr0684467
Drummond T, Hill M, Barton J: Electrochemical DNA sensors. Nat Biotechnol 2003, 21(10):1192–1199. 10.1038/nbt873
Schwierz F: Graphene transistors. Nat Nanotechnol 2010, 5(7):487–496. 10.1038/nnano.2010.89
Geim AK, MacDonald AH: Graphene: exploring carbon flatland. Phys Today 2007, 60: 35.
Geim AK, Novoselov KS: The rise of graphene. Nat Mater 2007, 6(3):183–191. 10.1038/nmat1849
Gurung P, Deo N: Electronic transport in DNA functionalized graphene sensors. arXiv preprint arXiv:1309.3373 2013.
Wang W, He S: Theoretical analysis on response mechanism of polymer-coated chemical sensor based Love wave in viscoelastic media. Sensors and Actuators B: Chem 2009, 138(2):432–440. [http://www.sciencedirect.com/science/article/pii/S0925400509002032] [] 10.1016/j.snb.2009.03.006
Dong X, Shi Y, Huang W, Chen P, Li LJ: Electrical detection of DNA hybridization with single-base specificity using transistors based on CVD-grown graphene sheets. Adv Mater 2010, 22(14):1649-+. 10.1002/adma.200903645
Poghossian A, Cherstvy A, Ingebrandt S, Offenhausser A, Schoning M: Possibilities and limitations of label-free detection of DNA hybridization with field-effect-based devices. Sensors and Actuators B: Chemical 2005, 111: 470–480.
Tel-Vered R, Willner B, Willner I: Biohybrid Electrochemical Devices. Hoboken: Wiley; 2010. [http://dx.doi.org/10.1002/9780470583463.ch12] []
Ahmadi M, Johari Z, Amin N, Fallahpour A, Ismail R: Graphene nanoribbon conductance model in parabolic band structure. J Nanomater 2010, 2010: 12.
Abadi HKF, Yusof R, Eshrati SM, Naghib S, Rahmani M, Ghadiri M, Akbari E, Ahmadi M: Current-voltage modeling of graphene-based DNA sensor. Neural Comput Appl 2013, 24: 1–5.
Huang B, Tai N, Huang W: Optimization and coordination of HAFDV PINN control by improved PSO. J Control Sci Eng 2013, 2013: 7.
He W, Cheng Y, Xia L, Liu F: A new particle swarm optimization-based method for phase unwrapping of MRI data. Comput Math Methods Med 2012, 2012: 9.
Rahmani R, Khairuddin A, Cherati SM, Pesaran HAM: A novel method for optimal placing wind turbines in a wind farm using particle swarm optimization (PSO). In 2010 Conference Proceedings (IPEC): 27–29 Oct 2010; Singapore. Piscataway: IEEE; 2010:134–139.
Rahmani R, Othman MF, Yusof R, Khalid M: Solving economic dispatch problem using particle swarm optimization by an evolutionary technique for initializing particles. J Theor Appl Inform Technol 2012, 46(2):526–536.
Das S, Abraham A, Konar A: Particle Swarm Optimization and Differential Evolution Algorithms: Technical Analysis, Applications and Hybridization Perspectives, Volume 116 of Studies in Computational Intelligence. Heidelberg: Springer; 2008.
Boeringer DW, Werner DH: Particle swarm optimization versus genetic algorithms for phased array synthesis. Antennas and Propagation, IEEE Trans 2004, 52(3):771–779. 10.1109/TAP.2004.825102
Clerc M: Particle swarm optimization, Volume 243. Hoboken: Wiley; 2006.
Eberhart SYR: Particle swarm optimization: developments, applications and resources. In Proceedings of the 2001 Congress on Evolutionary Computation: 27–30 May 2001; Seoul, vol. 1. Piscataway: IEEE; 2001:81–86.
Eberhart R, Shi Y, Kennedy J: Swarm intelligence. Indianapolis: Elsevier; 2001.
Poli R, Kennedy J, Blackwell T: Particle swarm optimization. Swarm Intell 2007, 1: 33–57. 10.1007/s11721-007-0002-0
del Valle Y, Venayagamoorthy G, Mohagheghi S, Hernandez J, Harley R: Particle swarm optimization: basic concepts, variants and applications in power systems. Evol Comput, IEEE Trans 2008, 12(2):171–195.
Kennedy J, Eberhart R: Particle swarm optimization. In IEEE International Conference on Neural Networks: 4–6 Oct 1995; Perth, vol. 4. Piscataway: IEEE; 1995:1942–1948.
Rahmani R, Yusof R, Seyedmahmoudian M, Mekhilef S: Hybrid technique of ant colony and particle swarm optimization for short term wind energy forecasting. J Wind Eng Ind Aerodynamics 2013, 123, Part A(0):163–170. [http://www.sciencedirect.com/science/article/pii/S0167610513002249] []
Schena M, Shalon D, Davis RW, Brown PO: Quantitative monitoring of gene expression patterns with a complementary DNA microarray. Science 1995, 270(5235):467–470. 10.1126/science.270.5235.467
Hoheisel JD: Microarray technology: beyond transcript profiling and genotype analysis. Nat Rev Genet 2006, 7(3):200–210. 10.1038/nrg1809
Kim CH, Jung C, Lee KB, Park HG, Choi YK: Label-free DNA detection with a nanogap embedded complementary metal oxide semiconductor. Nanotechnology 2011, 22(13):1–5.
Barthelmie RJ, Murray F, Pryor SC: The economic benefit of short-term forecasting for wind energy in the UK electricity market. Energy Policy 2008, 36(5):1687–1696. 10.1016/j.enpol.2008.01.027
Star A, Tu E, Niemann J, Gabriel J, Joiner C, Valcke C: Label-free detection of DNA hybridization using carbon nanotube network field-effect transistors. Proc Nat Acad Sci USA 2006, 103(4):921–926. 10.1073/pnas.0504146103
Wang LJ, Cao G, Tu T, Li HO, Zhou C, Hao XJ, Su Z, Guo GC, Jiang HW, Guo GP: A graphene quantum dot with a single electron transistor as an integrated charge sensor. Appl Phys Lett 2010, 97(26):262113. 10.1063/1.3533021
Manohar S, Mantz A, Bancroft K, Hui C, Jagota A, Vezenov D: Peeling single-stranded DNA from graphite surface to determine oligonucleotide binding energy by force spectroscopy. Nano Lett 2008, 8(12):4365–4372. 10.1021/nl8022143
Liu Z, Robinson J, Sun X, Dai H: PEGylated nanographene oxide for delivery of water-insoluble cancer drugs. J Am Chem Soc 2008, 130(33):10876–10877. 10.1021/ja803688x
Dong L, Chen Q: Properties, synthesis, and characterization of graphene. Front Mater Sci China 2010, 4: 45–51. 10.1007/s11706-010-0014-3
Fu D, Li L: Label-free electrical detection of DNA hybridization using carbon nanotubes and graphene. Nano Rev 2010, 1: 1–9.
Kang YJ, Kang J, Chang KJ: Electronic structure of graphene and doping effect on SiO(2). Phys Rev B 2008, 78(11):115401–115404.
Gilje S, Han S, Wang M, Wang KL, Kaner RB: A chemical route to graphene for device applications. Nano Lett 2007, 7(11):3394–3398. 10.1021/nl0717715
Chen Z, Lin YM, Rooks MJ, Avouris P: Graphene nano-ribbon electronics. Phys E-low-dimensional Syst Nanostructures 2007, 40(2):228–232. 10.1016/j.physe.2007.06.020
Tung VC, Allen MJ, Yang Y, Kaner RB: High-throughput solution processing of large-scale graphene. Nat Nanotechnol 2009, 4(1):25–29. 10.1038/nnano.2008.329
Varghese N, Mogera U, Govindaraj A, Das A, Maiti P, Sood A, Rao C: Binding of DNA nucleobases and nucleosides with graphene. Chemphyschem 2009, 10: 206–210. 10.1002/cphc.200800459
Acknowledgements
The authors would like to acknowledge the financial support from Research University grant of the Ministry of Higher Education of Malaysia (MOHE) under Project grant: GUP - 04H40. Also, thanks to the Research Management Center (RMC) of Universiti Teknologi Malaysia (UTM) for providing an excellent research environment to complete this work.
Author information
Authors and Affiliations
Corresponding author
Additional information
Competing interests
The authors declare that they have no competing interests.
Authors’ contributions
HK designed and performed the device modeling and simulation work, analyzed the data, and drafted the manuscript. RY and MTA supervised the research work. RR assisted with the optimization and proofread the manuscript. HH consulted in bio-molecular studies and assisted in analyzing DNA behaviors. All authors read and approved the final manuscript.
Authors’ original submitted files for images
Below are the links to the authors’ original submitted files for images.
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 2.0 International License ( https://creativecommons.org/licenses/by/2.0 ), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
About this article
Cite this article
Karimi, H., Yusof, R., Rahmani, R. et al. Development of solution-gated graphene transistor model for biosensors. Nanoscale Res Lett 9, 71 (2014). https://doi.org/10.1186/1556-276X-9-71
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/1556-276X-9-71