Abstract
Using density functional theory and quantum Monte Carlo calculations, we show that B12H n and B12F n (n = 0 to 4) quasi-planar structures are energetically more favorable than the corresponding icosahedral clusters. Moreover, we show that the fully planar B12F6 cluster is more stable than the three-dimensional counterpart. These results open up the possibility of designing larger boron-based nanostructures starting from quasi-planar or fully planar building blocks.
Avoid common mistakes on your manuscript.
Background
The icosahedral B12H122- cluster is the most stable molecule among the number of polyhedral boranes synthesized so far [1]. A large-scale and efficient synthesis of fully fluorinated boron hydrides, e.g., icosahedral B12F122-, has been also reported [2]. On the other hand, the all-boron C3v-B12 cluster is quasi-planar, and it was reported to be one of the most stable all-boron clusters. It was also established by extensive computations that the quasi-planar B12 cluster is much lower in energy than the all-boron icosahedral B12 cluster. This was reported not only for the neutral clusters [3], but also for the charged ones [4]. It is then interesting to investigate what happens with the relative stability of the two (quasi-planar and three-dimensional (3D)) all-boron structures upon addition of hydrogen or fluorine atoms. This is the purpose of this study.
Quasi-planar and 3D boron clusters with the number of hydrogen atoms smaller than the number of boron atoms have been studied both theoretically [5–11] and experimentally [12–14]. Ohishi et al. [12] reported the formation of B12H n + (n = 0 to 12) cationic clusters through ion-molecule reactions of the decaborane ions (B10H n +, n = 6 to 14) with diborane molecules (B2H6) in an external quadrupole static attraction ion trap. The mass spectrum analysis revealed that among the B12H n + clusters with different hydrogen content n, the B12H8+ molecule was the main product. In the same study, using first principle calculations with the Becke 3-parameter Lee-Yang-Parr (B3LYP) hybrid functional and the 6-31G(d) basis set, the authors compared the relative energies of quasi-planar and 3D B12H n + clusters with n varying from 0 to 12. According to that study, two-dimensional (2D) clusters with n = 0 to 5 are energetically preferred over the 3D structures, whereas 3D clusters are energetically favored for n ≥ 6. In a more recent combined experimental/theoretical study, Ohishi et al. [14] suggested that quasi-planar B12H n + with n = 0 to 3 clusters can be obtained by further removal of H atoms from the decaborane ions. This opens up the possibility of changing the structure of the B12H n + cluster by controlling the number of hydrogen atoms in the cluster.
To our knowledge, there are no previous studies on the structure and properties of quasi-planar B12F m clusters. However, the structures of two polyboron fluorides, B8F12 and B10F12, revealing unusual open structures were recently determined [15].
Methods
The initial search for the most stable structures of the boron hydrides B12H n and boron fluorides B12F n was done at the B3LYP/6-31G(d) level of theory using the FreeON code [16] with no symmetry restrictions. For clusters with an even number of hydrogen or fluorine atoms (even number of electrons), the computations were performed for the singlet multiplicity only, whereas doublet and quartet multiplicities were considered for clusters with an odd number of hydrogen or fluorine atoms (odd number of electrons). In the later case, structures with lower multiplicity were energetically more favorable. For the charged structures, a similar analysis has been done, and the ground state was found to have the lowest multiplicity. Next, the low-lying isomers of B12H n and B12F n have been re-optimized using the GAMESS-US code [17] at the B3LYP/6-311++G(d, p) level of theory, and for the resulting structures, the vibrational analysis has been done to identify true local minima. It is important to mention that the 'bare' B12 icosahedron undergoes distortions after structural optimization and that its symmetry is S2[3], not Ih. However, we will refer to that structure and its derivatives as icosahedral or 3D. The quasi-planar or fully planar clusters, for a change, will be often labeled as 2D structures.
The nucleus independent chemical shift (NICS) values and magnetic susceptibility tensors were calculated using the Gaussian 03 package [18] at the B3LYP/6-311++G(d, p) level of theory. To obtain the NICS values, we have used the gauge-independent atomic orbital method, and the magnetic susceptibility tensors were calculated using the continuous set of gauge transformations method.
The quantum Monte Carlo calculations have been done using the QWalk [19] package in two steps. The first step involved optimizing the trial many-body wave function by doing variational Monte Carlo calculations. The trial wave function was of the Slater-Jastrow form. The Slater determinants were constructed using B3LYP orbitals, generated using the GAMESS-US code with the previously optimized geometries within the B3LYP/6-311++G(d, p) level of theory. For the calculations, we have used Gaussian basis sets with effective core potentials [20]. In the second step, we have done fixed-node diffusion Monte Carlo (DMC) calculations with the previously optimized trial wave functions. In the computations, we have used a time step of 0.005 a.u. The DMC error bars are about 0.1 eV.
Results and discussion
Planar vs icosahedral structures
The procedure for determining the most stable isomers of B12H n was very similar to that reported in [12], namely, we started with optimized icosahedral and quasi-planar B12 clusters, and for a given n, we have calculated the total energies of all possible clusters that resulted from adding hydrogen atoms to the vertices of the distorted icosahedron or to the outer boron atoms of the quasi-planar structure; 2D clusters with an even n have been considered in our previous work [6], and here, we have extended the investigation to an odd n. The energetically most favorable 2D and 3D B12H n structures are shown in Figure 1. The minimum-energy cluster structures of B12F n , shown in Figure 2, have been found by replacing the hydrogen atoms of the low-lying B12H n isomers by fluorine atoms. Interestingly enough, the resulting structures are similar to those found for B12H n . One of the small differences is that the B-F bonds are on average 13% longer than the B-H bonds.
In Figure 3, we have plotted the total energy difference between quasi-planar (or fully planar) and icosahedral B12X n (X = H, F) clusters as a function of n, the number of H or F atoms in the cluster. As can be seen from the figure, the quasi-planar clusters with up to four hydrogen atoms are more stable than the corresponding icosahedral structures (a similar result has been recently reported [11] for B12H n 0/- clusters). The same is true for the fully planar B12F6 molecule, which is 0.63 eV lower in energy than the 3D cluster. The 2D and 3D B12F5 isomers are almost degenerated in energy. From Figure 3, we can also see that the energy difference, E2D - E3D, increases monotonically with n, with the exception of the two 'minima' for B12F4 and B12F6. These two minima may suggest an additional stabilization of the 2D structures over the 3D counterparts due to the presence of aromatic stabilization energy.
Similar results to those presented in Figure 3 were reported for the icosahedral and quasi-planar B12H n + structures [12]. However, in their recent work, Ohishi et al. [14] have used the PBE0 functional instead of the B3LYP functional to determine the energies of the B12H n + clusters. The authors' choice was motivated by the fact that the B3LYP functional may overestimate the energy difference between 2D and 3D structures. To address this problem, we calculated the energy difference between the 2D and 3D structures of B12, B12H6, and B12F6 using the very accurate DMC approach. The DMC E2D - E3D values are -5.13, 0.79, and -0.47 eV for B12, B12H6, and B12F6, respectively, whereas the corresponding B3LYP values are -5.34, 0.41, and -0.63 eV, respectively (see Figure 3). This means that the DMC values are shifted up by a value not larger than about 0.4 eV with respect to the B3LYP values. This, however, does not affect the conclusions that are drawn from Figure 3, since even if we shift up the curves by 0.4 eV, the quasi-planar B12H n and B12F n (n = 0 to 4), and the fully planar B12F6 clusters still remain energetically favorable.
Fully planar clusters: B12H6 vs B12F6
As calculated here and also reported in [11], the fully planar B12H6 cluster corresponds to a local minimum of energy, whereas the D3h-B12F6 structure wins the competition with other 2D and 3D isomers and corresponds to a global minimum of energy. Many properties of the B12H6 cluster have been previously described in [6], but for consistency purposes, we have repeated some of those calculations at the B3LYP/6-311++G(d, p) level of theory. The highest occupied molecular orbital-lowest unoccupied molecular orbital (HOMO-LUMO) gaps of the planar B12H6 and B12F6 structures are 3.54 and 4.39 eV, respectively, whereas the HOMO-LUMO gaps of the corresponding 3D clusters are the same and equal to 2.73 eV. The B-H and B-F interatomic distances are 1.179 and 1.326 Å in B12H6 and B12F6, respectively. For comparison, the computed B-H and B-F bond lengths in borane (BH3) and boron trifluoride (BF3) are 1.190 and 1.318 Å, respectively.
While both 2D structures, B12H6 and B12F6, have similar shape and size, they exhibit quite different magnetic properties that are directly related to aromaticity. First, we have computed the anisotropy of magnetic susceptibility. The values for B12H6 and B12F6 are -208.1 and -125.8 cgs ppm, respectively. The isotropic values of the magnetic susceptibility are -91.9 and -118.2 cgs ppm for B12H6 and B12F6, respectively. These results suggest that the induced ring current is stronger for B12H6 than for B12F6. Similarly, as reported in [6] for B12H6, the central part of the B12F6 molecule has a paratropic current flowing inside the inner B3 triangle. The antiaromaticity of the inner triangle is, however, smaller for B12F6 than for B12H6 since the NICS(0) values are 3.9 and 13.3 ppm, respectively. A global aromatic current is dominant above the B12F6 (B12H6) molecule since the NICS values are negative, NICS(1) = -5.5 ppm (-3.6 ppm) and NICS(2) = -4.8 ppm (-5.0 ppm), 1 and 2 Å above and below the center of the cluster.
To examine the influence of charge on the structure and stability of the fully planar clusters, we have also studied charged 2D and 3D B12X6 (X = H, F) structures. The lowest energy 2D structures identified for B12H6 and B12F6 were used as initial structures for the structural optimization at a given charge state. For the 3D structures, we have made a search over all possible configurations of the hydrogen or fluorine atoms. For the lowest energy structures with an even number of electrons, a singlet multiplicity has been assumed, whereas doublet and quartet multiplicities were considered for clusters with an odd number of electrons. In the later case, clusters with lower multiplicity were energetically more favorable. The structures of the 2D and 3D charged clusters are shown in Figure 4. It has been previously reported that the fully planar D3h-B12H6 cluster undergoes structural distortions if charged with one electron, although the quasi-planarity is preserved [6]. In general, all the charged 2D B12X6 (X = H, F) clusters are quasi-planar rather than fully planar, as can be seen in Figure 4. In Figure 5, we have plotted the energy difference between 2D and 3D [B12X6] q (X = H, F) structures as a function of the cluster charge state q. We have found that the addition of one or two electrons to fully planar B12H6 and B12F6 clusters (or the removal of one electron from them) makes those structures even less energetically favorable with respect to the corresponding 3D isomers. This is, however, less pronounced for B12H6 than for B12F6 as shown in Figure 5. Finally, it should be noted that the quasi-planar B12F62+ cluster is much more stable than its 3D isomer. Finally, all structures and energies are provided in Additional file 1.
Conclusions
Our density functional theory and quantum Monte Carlo results show that the B12H n and B12F n (n = 0 to 4) quasi-planar structures are energetically more favorable than the corresponding icosahedral clusters and that the fully planar B12F6 cluster is more stable than the 3D counterpart. We have also shown that negative or positive charge further stabilizes the 3D over the 2D B12X6 (X = H, F) clusters (except for B12X62+, where the opposite is observed). Our findings are potentially useful for designing larger boron-based nanostructures starting from quasi-planar or fully planar building blocks.
References
Pitochelli AR, Hawthorne FM: The isolation of the icosahedral B12H12-2Ion. J Am Chem Soc 1960, 82: 3228–3229.
Peryshkov DV, Popov AA, Strauss SH: Direct perfluorination of K2B12H12in acetonitrile occurs at the gas bubble - solution interface and is inhibited by HF. Experimental and DFT study of inhibition by protic acids and soft, polarizable anions. J Am Chem Soc 2009, 131: 18393–18403. 10.1021/ja9069437
Atiş M, Özdoğan C, Güvenç ZB: Structure and energetic of Bn(n = 2–12) clusters: electronic structure calculations. Int J Quantum Chem 2007, 107: 729–744. 10.1002/qua.21171
Zhai HJ, Kiran B, Li J, Wang LS: Hydrocarbon analogues of boron clusters - planarity aromaticity and antiaromaticity. Nat Mater 2003, 2: 827–833. 10.1038/nmat1012
Alexandrova A, Koyle E, Boldyrev A: Theoretical study of hydrogenation of the doubly aromatic B7-cluster. J Mol Model 2006, 12: 569–576. 10.1007/s00894-005-0035-5
Gonzalez Szwacki N, Weber V, Tymczak CJ: Aromatic borozene. Nanoscale Res Lett 2009, 4: 1085–1089. 10.1007/s11671-009-9362-2
Sahu S, Shukla A: Probing aromaticity of borozene through optical and dielectric response: a theoretical study. Nanoscale Res Lett 2010, 5: 714–719. 10.1007/s11671-010-9536-y
Forte G, La Magna A, Deretzis I, Pucci R: Ab initio prediction of boron compounds arising from borozene: structural and electronic properties. Nanoscale Res Lett 2010, 5: 158–163. 10.1007/s11671-009-9458-8
Chen Q, Li S-D: π-Aromatic B16H6: a neutral boron hydride analogue of naphthalene. J Clust Sci 2011, 22: 513–523. 10.1007/s10876-011-0400-8
Böyükata M, Güvenç ZB: DFT study of Al doped cage B12Hnclusters. Int J Hydrogen Energ 2011, 36: 8392–8402. 10.1016/j.ijhydene.2011.04.078
Bai H, Li S-D: Hydrogenation of B120/-: a planar-to-icosahedral structural transition in B12Hn0/-(n = 1–6) boron hydride clusters. J Clust Sci 2011, 22: 525–535. 10.1007/s10876-011-0408-0
Ohishi Y, Kimura K, Yamaguchi M, Uchida N, Kanayama T: Formation of hydrogenated boron clusters in an external quadrupole static attraction ion trap. J Chem Phys 2008, 128: 124304–124307. 10.1063/1.2894864
Ohishi Y, Kimura K, Yamaguchi M, Uchida N, Kanayama T: Energy barrier of structure transition from icosahedral B12H6+to planar B12H5+and B12H4+clusters. J Phys Conf Ser 2009, 176: 012030.
Ohishi Y, Kimura K, Yamaguchi M, Uchida N, Kanayama T: Synthesis and formation mechanism of hydrogenated boron clusters B12Hnwith controlled hydrogen content. J Chem Phys 2010, 133: 074305–074307. 10.1063/1.3474996
Pardoe JAJ, Norman NC, Timms PL, Parsons S, Mackie I, Pulham CR, Rankin DWH: The surprising structures of B8F12and B10F12. Angew Chem Int Edit 2003, 42: 571–573. 10.1002/anie.200390164
Bock N, Challacombe M, Gan CK, Henkelman G, Nemeth K, Niklasson AMN, Odell A, Schwegler E, Tymczak CJ, Weber V: FreeON.[http://freeon.org/]
Schmidt MW, Baldridge KK, Boatz JA, Elbert ST, Gordon MS, Jensen JH, Koseki S, Matsunaga N, Nguyen KA, Su S, Windus TL, Dupuis M, Montgomery JA: GAMESS-US, version 1 OCT 2010 (R1).[http://www.msg.chem.iastate.edu/gamess/]
Frisch MJ, Trucks GW, Schlegel HB, Scuseria GE, Robb MA, Cheeseman JR, Montgomery JA Jr, Vreven T, Kudin KN, Burant JC, et al.: Gaussian 03, revision E.01.[http://www.gaussian.com/]
Wagner LK, Bajdich M, Mitas L: QWalk, version 0.95.0.[http://www.qwalk.org/]
CRENBL ECP[http://bse.pnl.gov/]
Acknowledgements
The authors would like to acknowledge the support given by the Robert A. Welch Foundation (grant J-1675), the NSF CREST CRCN center (grant HRD-1137732), and the Texas Southern University High Performance Computing Center (http://hpcc.tsu.edu/; grant PHY-1126251).
Author information
Authors and Affiliations
Corresponding author
Additional information
Competing interests
The authors declare that they have no competing interests.
Authors' contributions
NGS conceived the study, did the calculations, and drafted the manuscript. CJT conceived the study and revised the manuscript. All authors read and approved the final manuscript.
Electronic supplementary material
11671_2012_776_MOESM1_ESM.DOC
Additional file 1:Total electronic energies of the boron structures. Electronic supplementary material Figure S1 shows a fully planar boron-based nanostructure, B504H36, which was obtained starting from planar B12H6 building blocks. Table S1 recollects total energies and Cartesian coordinates of the optimized structures shown in Figures 1 and 2. (DOC 4 MB)
Authors’ original submitted files for images
Below are the links to the authors’ original submitted files for images.
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 2.0 International License (https://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
About this article
Cite this article
Gonzalez Szwacki, N., Tymczak, C.J. B12H n and B12F n : planar vs icosahedral structures. Nanoscale Res Lett 7, 236 (2012). https://doi.org/10.1186/1556-276X-7-236
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/1556-276X-7-236