Abstract
Slurry preparation is one of the most critical steps for semisolid casting, and its primary goal is to prepare slurry with uniformly distributed fine globules. In this work, electromagnetic stirring (EMS) and the addition of Sc and Zr elements were used to prepare semisolid slurry of 7A04 aluminum alloy in a large diameter slurry maker. The effects of different treatments on the microstructure, composition and their radial homogeneity were investigated. The results show that, compared to the slurry without any treatment, large volume slurry with finer and more uniform microstructure can be obtained when treated by EMS, Sc, or Zr additions individually. EMS is more competent in the microstructural and chemical homogenization of the slurry while Sc and Zr additions are more excellent in its microstructural refinement. The combined treatment of EMS, Sc and Zr produces premium 7A04 aluminum alloy slurry with uniformly distributed fine α-Al globules and composition. The interaction mechanism between EMS and Sc and Zr additions was also discussed.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Atkinson H V. Modelling the semisolid processing of metallic alloys. Progress in Materials Science, 2005, 50(3): 341–412.
Fan Z. Semisolid metal processing. International Materials Reviews, 2002, 47(2): 49–85.
Tan Yanlong, Fu Xinsheng, Wang Dansan, et al. Study of defects and improve technics on semi-solid rheologic squeeze casting of gear of tachometer. Foundry, 2010, 59(10) 1049–1052. (In Chinese)
Li Yanlei, Li Yuandong, Li Chun, et al. Microstructure characteristics and solidification behavior of wrought aluminum alloy 2024 rheo-diecast with self-inoculation method. China Foundry, 2012, 9(4): 328–336.
Gencalp S and Saklakoglu N. Semisolid Microstructure Evolution during Cooling Slope Casting under Vibration of A380 Aluminum Alloy. Materials and Manufacturing Processes, 2010, 25(9): 943–947.
Yang B, Mao W, and Song X. Microstructure characteristics and mechanical properties of rheocasting 7075 aluminum alloy. China Foundry, 2013, 10(5): 277–281.
Xu Chao, Zhao Junwen, Luo Qinglai, et al. Effects of Al-5Ti-1B Grain Refiner on Solidification Microstructure of 7A04 Aluminum Alloy. Rare Metal Science and Engineering, 2016 (6): 1559–1564. (In Chinese)
Mapelli C, Gruttadauria A, and Peroni M. Application of electromagnetic stirring for the homogenization of aluminium billet cast in a semi-continuous machine. Journal of Materials Processing Technology, 2010, 210(2): 306–314.
Kang C G and Lee S M. The effect of solid fraction and indirect forging pressure on mechanical properties of wrought aluminum alloy fabricated by electromagnetic stirring. The International Journal of Advanced Manufacturing Technology, 2009, 42(1-2): 73–82.
Charles V. Elaboration of semisolid alloys by means of new electromagnetic rheocasting processes. Metallurgical Transactions B, 1992, 23(2): 189–206.
Zhang Haitao, Nagaumi H, Zuo Yubo, et al. Coupled modeling of electromagnetic field, fluid flow, heat transfer and solidification during low frequency electromagnetic casting of 7XXX aluminum alloys: Part 1: Development of a mathematical model and comparison with experimental results. Materials Science and Engineering: A, 2007, 448(1): 189–203.
Zhu Yanli, Zhao Junwen, Li Wei, et al. Effect of electromagnetic stirring on microstructure of large-volume semi-solid slurry of 7A04 aluminum alloy. The Chinese Journal of Nonferrous Metals, 2014, 24(11): 2735–2742. (In Chinese)
Huskins E L, Cao B, and Ramesh K T. Strengthening mechanisms in an Al-Mg alloy. Materials Science and Engineering: A, 2010, 527(6): 1292–1298.
Kilicaslan M, Lee W, Lee T, et al. Effect of Sc addition on the microstructure and mechanical properties of as-atomized and extruded Al-20Si alloys. Materials Letter, 2012, 71: 164–167.
Eckert S, Nikrityuk P A, Willers B, et al. Electromagnetic melt flow control during solidification of metallic alloys. The European Physical Journal Special Topics, 2013, 220(1): 123–137.
Barman N and Dutta P. Effect of process parameters on transport phenomena during solidification in the presence of electromagnetic stirring. Transactions of the Indian Institute of Metals, 2009, 62(4-5): 469–474.
Milman Y V, Sirko A I, and Lotsko D V. Microstructure and mechanical properties of cast and wrought Al-Zn-Mg-Cu alloys modified with Zr and Sc. Materials Science Forum, 2002, 396-402.
Senkov O N, Senkova S V, and Shagiev M R. Effect of Sc on aging kinetics in a direct chill cast Al-Zn-Mg-Cu Alloy. Metallurgical and Materials Transactions A, 2008, 39(5): 1034–1053.
Author information
Authors and Affiliations
Corresponding author
Additional information
Male, born in 1982, Ph.D. and associate professor. His research interests mainly focus on advanced processing of light alloys such as die casting, semisolid metal processing and additive manufacturing; and light metal alloy based functional materials. He has so far published over 30 papers in national and international journals.
Rights and permissions
About this article
Cite this article
Zhao, Jw., Guo, A., Li, H. et al. Semisolid slurry of 7A04 aluminum alloy prepared by electromagnetic stirring and Sc, Zr additions. China Foundry 14, 188–193 (2017). https://doi.org/10.1007/s41230-017-6115-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s41230-017-6115-1