Abstract
This study statistically evaluated the characteristics of induced earthquakes by geothermal power plants (GPPs) and generated a probabilistic model for simulating stochastic seismic events. Four well-known power plant zones were selected worldwide from the United States, Germany, France, and New Zealand. The operational condition information, as well as the corresponding earthquake catalogs recorded in the vicinity of GPPs, were gathered from their commencement date. The statistical properties of events were studied elaborately. By using this proposed database, a probabilistic model was developed capable of generating the number of induced seismic events per month, their magnitude, focal depth, and distance from the epicenter to the power plant, randomly. All of these parameters are simulated as a function of power plant injection rate. Generally speaking, the model, introduced in this study, is a tool for engineers and scientists interested in the seismic risk assessment of built environments prone to induced seismicity produced by GPPs operation.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
1 Introduction
Geothermal energy is one of the newly developed sources of clean energy production in many countries around the world. Geothermal power plants (GPPs) produce electrical energy using the hot water steam of extracted high-temperature water from the Earth’s crust (at depths of 2−10 km) that activates the electrical turbines (Fridleifsson et al. 2008). Since the volume of extracted water is significantly large, it is not possible to store it in surface reservoirs. In addition, this high temperature water works as a fuel for the GPPs, and the continuous extraction of water without any replacement would destroy the underground water resources. To overcome these problems, the cooled water is injected back into the Earth under high-pressure. This repeated extraction/injection process may cause some changes in the stress magnitude of the underlying Earth layers, thus creating or extending cracks in the crustal rocks. The fractured rocks may trigger a series of small to moderate magnitude earthquakes over a long period (Kraft et al. 2011). Since many GPPs are constructed close to populated areas, the induced vibrations from the operation of GPPs may cause inconvenience for building residents, and also cause damage to the buildings’ structural and nonstructural components (Zastrow 2019). Such undesired vibrations with a high recurrence rate can bring about claims by building owners that, in some cases, lead to GPP shutdown. For instance, the South Korean geothermal power plant in Pohang City was shut down after a severe earthquake with a magnitude of 5.4 occurred in 2017 (Ellsworh et al. 2019; Zastrow 2019). A Similar problem occurred in Basel, Switzerland, after the 3.2 magnitude earthquake of 8 December 2006 (Mignan et al. 2015) due to the local GPP’s activity. Additionally, Khansefid et al. (2022a) showed that GPP-induced earthquakes can cause some levels of disruption to the occupants’ life in vulnerable masonry buildings. Accordingly, it is highly important to study the seismic risk of this type of electric power plants.
A review of literature indicates that there are some research works on the induced seismicity of specific GPP sites. As an early work, Eberhart-Phillips and Oppenheimer (1984) studied the microseismicity of the region around Geysers GPP in California and showed that events occur wherever the steam production exists. However, they could not identify any specific correlation between the injection rate and the magnitude of seismic events. This issue was raised again in other GPPs such as Wairakei (Allis et al. 1985); however, it was shown by Bromley et al. (1987) that increasing the power plant production causes a swarm of events triggered by both extraction and reinjection of fluids. In another work, Charléty et al. (2007) dealt with the effects of flow rate and wellhead pressure on induced earthquake magnitude and its distribution over three main boreholes of Soultz-sous-Forêts GPP in France. In addition, a more comprehensive study of Majer et al. (2007) investigated the relationship between the number, distance, and depth of GPPs’ induced earthquakes and the injection rate for the Geysers, Cooper Basin, Berlin, Soultz-sous-Forêts, and Basel GPPs. Cuenot et al. (2008) simulated the hydraulic water injection in a well of Soultz-sous-Forêts GPP experimentally and traced the wave propagation and microseismic activity of the region using the installed seismological network. It was shown by Nicol et al. (2011) that most of GPP microseismic events occur during the injection and extraction process of the water stream, and are clustered at shallow crustal depths. Moreover, Evans et al. (2012), based on their observations, believed the sites with sedimentary rocks are less seismogenic than the ones with crystalline rocks, and in both cases, faults located near injection wells can increase the seismic activity significantly. In a series of works, Shapiro et al. (2007, 2010, 2013) attempted to obtain the probability of observing an induced earthquake with a given magnitude. Megies and Wassermann (2014) installed several seismometers in the Molasse Basin to trace the induced seismicity by the GPPs located around Munich City, which lead to the recording of several events with a local magnitude of up to 2.4. In some other works, several researchers (Bachmann et al. 2012; Langenbruch and Zoback 2016; Leptokaropoulos and Staszek 2019) tried to evaluate the relationship between the injection rates and the earthquakes’ magnitude in different GPPs. Kwiatek et al. (2015) also worked on the induced seismicity in the northern part of Geysers GPP, due to long-term fluid injection. Cheng and Chen (2018) performed a statistical analysis on the distance of observed seismic events induced by the Salton Sea GPP operation, and found that the magnitude of events located outside the defined ring of a GPP (radius of 2−5 km) is five times less than the ones located near the power plant. Broccardo et al. (2020) estimated the seismic risk of the Geldinganes GPP in Iceland. Their study emphasized the need for reevaluation of the risk by using updated data throughout a power plant’s activity. Convertito et al. (2021) also performed a time-dependent seismic hazard analysis of the St Gallen geothermal field. More recently, Khansefid et al. (2022b) worked on recorded ground motions due to GPP activities to develop a set of ground motion models.
Most of the existing work has dealt with the induced seismicity by geothermal power plants from the physics-based point of view and there are only a few studies (Mignan et al. 2015; Langenbruch et al. 2020) on the seismic risk assessment of such earthquakes, which points to need for probabilistic models, developed based on the statistical characteristics of earthquakes. Accordingly, this research is an attempt, from the engineering perspective, to initially examine the effects of geothermal power plant activity on the induced seismicity identified in four GPP zones around the world, and then propose a probabilistic model for simulating the seismic events due to the operation of GPPs. First, the general information of GPPs and their injection rates were collected from different sources. All of these GPPs continue in operating status. The induced earthquake data obtained during their operation period were also supplemented from several online earthquake catalogs. These data were filtered by considering the minimum completeness magnitude of the catalog. Also examined were the effects of geothermal activity, especially the injection rate, on the properties of recorded events such as moment magnitude, focal depth, and the distance of events from GPP stations. Using the proposed database, a probabilistic model was developed to simulate, randomly, earthquakes induced by the GPP activity. The model procreates the number of probable events per month, their magnitudes, focal depths, as well as their distance from a GPP station based on the power plant’s average operational injection rate per month. In the last step, the model was validated through application of different methods. Generally speaking, this model is a powerful tool for scientists and engineers who are interested in and in charge of estimation of seismic risk due to the operation of geothermal power plants.
2 Geothermal Power Plants Information
A total of eight active GPPs located in the United States, Germany, France, and New Zealand are selected for further analysis. Each of these power plants contains several active water injection wells. The Geysers geothermal plant is located in northern California, the United States. This GPP started operating in 1960 and is known as one of the biggest natural geothermal sites in the world. The Salton Sea and the Brawley GPPs are constructed in the Imperial Valley region of southern California, the United States, with the starting operation date of 1982. These two power plants are located in the close proximity to each other. Therefore, they are considered as a single GPP zone called “Imperial.”. In central Europe, four GPPs are operating near the border of Germany and France in the Rhineland area using the enhanced water circulating systems. The Landau and the Insheim GPPs are located in western Germany and have started their operation from the years 2007 and 2012. The Soultz-sous-Forêts and the Rittershoffen GPPs are located in eastern France and have been operating since 2008 and 2016. The four GPPs are grouped as a “Rhineland” GPP zone. The last GPP is Kawerau, which is located near the town of Kawerau inland from the Bay of Plenty, the northern coast of North Island, New Zealand, and its injection wells started operating in 1993. The information summary of these GPP zones is presented in Table 1, while their location map is shown in Fig. 1.
The exact location of the Geysers, Salton Sea, and the Brawley power plants are collected from the Geothermal Prospector (Getman et al. 2015), a web GIS framework developed by the National Renewable Energy Laboratory. The detailed data of monthly water injection throughout geothermal activity are archived in the California Department of Conservation website (California Department of Conservation 2020). The information of GPPs in Germany and France is available on the website of Geothermal Information System, called GeotIS, (Pester et al. 2010), which is supported by the Federal Ministry for Economic Affairs and Energy of Germany. The location of Kawerau GPP in New Zealand is adopted from the Global Energy Observatory (Gupta and Shankar 2018) website, and the injection rates are available in the Bay of Plenty Regional Council catalog (Bay of Plenty Regional Council 2018). The injection flow rates of all wells per month for each of the GPP zones are shown in Fig. 2. These flow rates are illustrated for the whole period of GPPs operation. Different GPPs report their injection rate with different time windows of daily, monthly, or even yearly. As it can be seen, the GPPs operate in the Imperial, Geysers, and Kawerau zones work with a higher injection rate (2000−3000 l/s) in comparison with the ones in the Rhineland zone (200−400 l/s).
3 Earthquake Catalogs
As is typical of all research work that focuses on the development of probabilistic models to study seismicity, earthquake catalogs play a key role in the final quality and accuracy of the model. Since there is no separate earthquake catalog for the events induced by human activities, especially the ones caused by GPPs, a major challenge is to create such a catalog.Footnote 1 For the selected GPP zones, different online credible sources of earthquake event catalogs are used. For the Geysers and Imperial zones, the United States Geological Survey (2020) is used. In the case of the Rhineland zone, the data published by the International Seismological Center catalog (2020) is adopted. For the Kawerau GPP zone, the catalog presented by the Geological Hazard Information for New Zealand (2020) is employed to collect the microseismic data. Only some criteria are taken into account to select the seismic data: (1) Events related to the time period of GPP operation are considered for this study; (2) The events that occurred within the shallow focal depth (around 1−10 km) are collected based on the depth of GPP wells varying from 500 m to 5 km (see Table 1); and (3) A spatial window with a radius of approximately 25 km around the power plants is considered as a surrounding possible area of earthquake occurrence.
Since the seismic data are collected from different sources, their magnitudes are reported in different scales, including moment magnitude (MW), local magnitude (ML), and duration magnitude (MD). To homogenize all data, scales of MD and ML are converted to MW, which is more familiar to the earthquake and structural engineers and scientists who are the target community of the proposed model. Different equations (Table 2) are applied to convert the magnitudes for each of the GPP regions.
After homogenizing the earthquake catalogs, it is necessary to refine them and remove the events recorded below the magnitude level that the seismometer networks could reliably and consistently record. Accordingly, the minimum completeness magnitude (MC) of each catalog is calculated for the 10 year time-windows using the entire range magnitude method (Ogata and Katsura 1993), which is more comprehensive and stable than many other existing methods in the literature (Woessner and Wiemer 2005). The uncertainties of the completeness magnitude are also considered by obtaining their standard deviation using the Monte Carlo bootstrapping method (Efron and Tibshirani 1993). The results for each of the GPP zones during different time windows are shown in Table 3 along with the maximum moment magnitudes obtained by Kijko’s (2004) methodology. With the passing of time, the MC decreases in all catalogs, which implies the improvement of seismic networks responsible for recording the events during the decades since a GPP began operation. Fortunately, after eliminating the events with magnitudes lower than MC, an acceptable number of events remain for each of the GPP zones for further analysis (Table 3). The spatial distribution of the remaining data, showing their magnitudes, is depicted in Fig. 3. Clearly, earthquakes with higher magnitudes occur closer to the GPP stations’ wells.
The last, but not least important issue about the earthquake catalogs is the existence of background seismicity by other possible sources in the GPP zones. In the Geysers and Rhineland GPP zones, there are no considerable seismic events before the commencement of water injection. Therefore, the catalogs contain no tangible background seismicity. In the Kawerau GPP area, there were few microseismic activities before 2006 that are likely induced events connected to that GPP because of their shallow depth and proximity to the power plant. Owing to the lack of available data for injection rates during its early years of operation, the Kawerau GPP is evaluated only from 2006. In the case of the Imperial zone, there were some seismic events before injection began. However, the focal depths of these events, as well as their magnitudes, are considerably higher than the range of events that occurred after the GPP operation starting date. Thus, it can be inferred that the available catalog of the Imperial zone also contains no tangible and affecting background seismicity. In the end, after all of these controls for selecting the data, it is still possible that a limited number of unrecognized tectonic earthquakes exists in the catalog.
4 Statistical Analysis of Induced Seismicity
The statistical relationships between the frequency and other features of earthquakes and the injection rate of geothermal power plants was studied in previous research works (Majer et al. 2007; Shapiro et al. 2010; Halldorsson et al. 2012; Kwiatek et al. 2015). However, most of these earlier works focused on the statistical analysis of induced seismicity caused by the water injection in a single well. In this study, with a regional perspective, the effect of water injection in multiple active wells in the different GPP zones is considered. It is helpful to develop a probabilistic model capable of simulating seismicity considering GPP zones with multiple injection wells. From the risk assessment point of view, it is not enough to know the effects of only a single injection well. In an area with several wells, their cumulative effects are important on the people, buildings, and other infrastructure of the region. In this regard, the statistical properties of the main characteristics of earthquakes induced by geothermal power plant activity are evaluated for all the GPP zones, including moment magnitude (MW), focal depth (D), and the distance of the epicenter of seismic events to the GPP site (R). All of these parameters are important and effective in the imposed seismic risk to the built environments in the vicinity of GPPs. MW is implicitly a measure of released energy in these earthquakes, while focal depth can show the relationship between the depth of injection wells and the hypocenter of earthquakes. In addition, the distance of the event epicenter to the GPP site shows the radius around the GPP zone, in which the earthquake occurrence is probable.
The frequency and cumulative density function (CDF) of these parameters in each of the GPPs, as well as the empirical cumulative probability density functions of observing an earthquake, with a given value or less for each of the parameters, is illustrated in Fig. 4. The figure indicates that the moment magnitude of events varies almost from 0.5 to 3, and in very rare cases, it goes above 3, while still remaining below 4. The medians of observed moment magnitudes are 1.10, 1.75, 1.70, and 1.40 for the Imperial, Geysers, Kawerau, and Rhineland GPP zones. Most of these events occur in shallow depths. The focal depth of recorded events ranges from 1 to 10 km (considering the imposed limit on the focal depth) with the medians of 4.3 km, 4.5 km, 5.0 km, and 4.0 km for the Imperial, Geysers, Kawerau, and Rhineland GPP zones. The comparison of these values with the well depths of Table 1 shows meaningful consistency. In some cases, however, the focal depths are higher than the maximum well depth, which can either be due to the changes in the pore pressure level in the deeper crust layers (Brown and Ge 2018) or the uncertainties in their estimation process. In addition, the epicenter-to-GPP distance of catalog seismic events depicts most of the earthquakes occurring close to GPP stations. They started from 100 m, while the medians for the Imperial, Geysers, Kawerau, and Rhineland GPP zones are 2.8 km, 1.3 km, 2.9 km, and 1.8 km, respectively. Approximately, 93% of the induced earthquakes occur within a 10 km radius of GPP zones. It is also important to note that there are some levels of uncertainty in the reported epicentral location of the events, which can affect the calculated distance, especially in a short distance range (Woessner et al. 2010). Many of the databases used in our model have increased their accuracy over time. In addition, in the case of a distance calculation, at each GPP site, the GPP central location is first calculated by averaging the latitude and longitude of all injection wells. Then a radius of 25 km is considered for selecting the events. After that, the distance of each event is obtained as the distance between the event epicenter and the nearest GPP well in each zone. Therefore, injection in multiple wells simultaneously can leads to a higher range of distances, in comparison with the case of considering earthquakes due to injecting water in only a single well.
The relationship between the injection rate and the moment magnitude is another important variable in understanding the induced seismic events by the GPPs. Fig. 5 represents the variation of monthly injection rate, as well as the average and maximum magnitude of seismic events per month for all periods of GPPs operation. Despite the increase in the injection rate during the operational years, there are no general significant changing trends in the average and maximum magnitude of monthly earthquakes. In the Kawerau zone, a slight increase is observable in both parameters, but in the Imperial and Rhineland zones, a gradual reduction is seen. Finally, in the Geysers zone, no significant change is visible.
To assess the features of moment magnitudes of induced seismic events more precisely, the Gutenberg–Richter (Gutenberg and Richter 1954) equation in the logarithmic form is considered and its coefficients are calculated for each of the four GPPs’ catalog considering MC.
where a and b are the Gutenberg–Richter (G–R) coefficients. M is the moment magnitude and N is the number of events with a magnitude greater than M.
To investigate the effect of GPPs’ injection rate on the G–R coefficients, first, the available catalogs for all GPP zones are divided into different groups per their injection rates. Therefore, bins of 500 l/s are considered based on the availability of data at different injection rates. Next, for each group of each GPP zone, a separated G–R equation is fitted, and the coefficients are obtained. Fig. 6 shows the fitted G–R equations and observed data for all GPPs, which implies good fitness. Table 4 reports the a and b coefficients of all GPPs for different injection rates (IR). The rise in the injection rates increases the a-value, while the b-values at different zones do not follow a tangible monotonic trend. The b-values vary around 1.05−1.33, 1.06−1.28, 0.73−1.07, and 0.8 for the Geysers, Imperial, Kawerau, and Rhineland, while the a-values of these GPP zones are around 3.5−5.94, 3.11−4.37, 3.18−4.43, and 3.07, respectively. In the previous works, for the Geysers (Leptokaropoulos and Staszek 2019), Imperial (Cheng and Chen 2018), and Rhineland (Cuenot et al. 2008), the average of b-values equals to 1.05−1.25, 0.78−1.07, and 1.29, respectively. Some of these values slightly differ from the average of b-values in this research, which can be due to the usage of different event catalogs. However, by considering the results of Table 4 for different injection rates, the proposed results of previous research works are in the same ranges as those of this study.
We compared the main characteristics of the proposed database in this study with the ones presented and used in the previous research works by other scientists. As is shown in Table 5, the proposed catalog of this research covers a wider range of data from different GPP zones in different countries than does previous research. Also, the covered ranges of injection rates, moment magnitudes, focal depths, and time periods of collected data are significantly broader than the available databases. Therefore, this developed database will provide more opportunities for researchers to study the features and characteristics of GPP-induced earthquakes in the future.
5 Probabilistic Model for Simulating Random Seismic Events
In this part of the article, a model is developed through a probabilistic framework to consider the uncertainties related to the induced seismicity by GPPs operation.
5.1 Model Development
Most probabilistic models (Shapiro et al. 2007, 2010, 2013; Convertito et al. 2012; Barth et al. 2013) have focused on estimating the occurrence probability of earthquakes with a certain magnitude due to a GPP’s operation. To estimate the regional seismic risk of buildings from an engineering perspective, other earthquake features, such as magnitude, focal depth, and epicenter-to-GPP distance, need to be simulated as well. Accordingly, the proposed model attempts to simulate the number of probable events in the future, their magnitudes (MW), focal depths (D), as well as the distance of the occurred earthquakes from the GPP zone (R) by considering their correlations. All of these parameters may be affected by the injection rate of GPPs. Thus, the proposed model considers this parameter as a physical characteristic of GPP activities that control the induced seismicity in the surrounding area. In such a model, the availability of data plays a key role. By considering the number of available data in previously introduced and studied databases, the Imperial, Geysers, and Kawerau GPPs are selected for the next steps. Additionally, 80% of the available data are selected for the model development and the remaining data are used as a part of the validation process.
As a first parameter, the number of induced events per month (N) is simulated by using the linear Bayesian regression method (Gelman et al. 2004; Bishop 2007), which takes the uncertainties into account within the regression process by considering the regression coefficients as random variables.
where IR is the average injection rate (l/s) of the GPP zone in all of its boreholes per month, c and d are Bayesian regression coefficients, and εN is the residuals of the equation modeled as a random variable following zero-mean normal probability distribution with a standard deviation of σN.
The main target of Bayesian regression is to obtain the posterior joint probability distribution of the regression coefficients by using their known prior distribution (Elster et al. 2015). In the case that the prior distribution is unknown due to the lack of previous knowledge, Jeffreys (1967) showed that it is possible to assume the governance of improper prior uniform distribution with the value of \(\frac{1}{{\sigma }_{N}^{2}}\). This will lead to the posterior distribution of t-student for the regression coefficients and inverse Gaussian probability density function for \({\sigma }_{N}^{2}\).
The regression coefficients are shown in Fig. 7. This figure also depicts the number of recorded events per month and their dependency on the GPP injection rate in the same time period for different GPPs separately and also all GPPs together, in the logarithmic scale. The gradual linear increase in the logarithmic form of the number of events is observable in all GPPs by the increase of the injection rate. An appropriate consistency is traced between the fitted model and observed data for each of the GPPs. The regression correlation coefficients (R2) of different models range between 0.72 and 0.88, which confirm the acceptable accuracy of the fitting process. In addition, the histograms of residuals of equation (2) prove that the consideration of zero-mean normal distribution for their behavior is an acceptable presumption. Finally, for the case of considering all GPPs together, the mean and standard deviation of obtained t-student distribution for coefficient c are − 1.14 and 0.085, while these values for the coefficient d are 0.99 and 0.26, respectively. In addition, the standard deviations of residuals (σN) are calculated as equal to 0.164, 0.243, 0.261, and 0.237 for the cases of Geysers, Imperial, Kawerau, and all GPPs together.
After working on the number of randomly generated events, it is necessary to simulate the events’ magnitudes, focal depths, and distances from the GPP station. These parameters may depend on the injection rate of the power plant. Besides, different sources of uncertainties can affect induced seismicity, including the underlying soil layer condition, fault properties, injection well depths and locations, and so on. In this regard, the injection rate of GPPs is discretized and divided into different bins, with a bin length of 20 l/s. For any bin, it is assumed that each of the considered variables, namely, MW, D, and R, follows the lognormal distribution (Pasari 2019) as a well-known function for simulating natural phenomena with the mean and standard deviations of \(({\mu }_{Mw}.{\sigma }_{Mw})\), \(({\mu }_{D}.{\sigma }_{D})\), and \(({\mu }_{R}.{\sigma }_{R})\), respectively. To consider the dependency of output variables of the model to the injection rate, these parameters, for all of the variables (MW, D, and R), are considered as a function of injection rate and modeled using a linear Bayesian regression method.
where H is the outcome of the model, I is an integer from 1 to 6 standing for outcome variables of μMw, σMw, μD, σD, μR, and σR, respectively. W is the regression coefficients’ probability distribution functions (PDFs) following the t-student distribution, and ϕ is the regressors of the model. εi is the ith parameter regression error, which is a random variable with zero mean and variance of σ2.
The proposed model is calibrated to the studied database. In Fig. 8, the dependency of mean and standard deviation values of all variables of the model are plotted against the GPPs injection rate. In most of the fitted models, the R2 coefficients of regression correlation are in the suitable range, which implies the acceptable accuracy of the modeling approach. It is depicted that the simulating model follows the general trend of observed data. A very slight increase is seen in the mean value of moment magnitudes with the increase of injection rate for different GPPs. This implies that the event magnitude is not significantly dependent on the injection rate. The mean values of distance between the event epicenters and GPP locations increase with the increase of injection rate, which means that the higher injection rate leads to a farther propagation of high-pressure water in the rock layers and fault activates in the far distance. In the case of focal depth, both increase and decrease are observable with the higher injection rates, which could be inferred as a sign that shows that focal depth is not a function of injection rate directly, and perhaps injection well depth and fault geometry are more important parameters. The obtained model parameters, that is, the mean and standard deviation of the t-student PDF of all regression coefficients, are reported in Table 6. The correlation coefficient and covariance matrices of model output variables are also shown in Table 6. The arrays of correlation matrix with values higher than 0.3 are bolded in this table. The mean value of focal depth and distance have a slight dependency on the moment magnitude with the correlation coefficient varying from 0.34 to 0.36, while the focal depth and distance show a higher-level dependency on each other with a coefficient of around 0.5.
Table 7 shows that there are some levels of correlation between output parameters. To consider this correlation during the simulation process of random earthquakes, the mathematical methodology proposed by Marsaglia and Tsang (2000), and also used by Khansefid et al. (2019) to generate random correlated variables of earthquake accelerograms, is adopted in this study. Therefore, the random values of earthquake characteristics are generated by the following equation.
In the above equations, Mθ is the mean value of parameters of lognormal distributions obtained via regression equation (3) without considering ε. Lθθ is a lower triangular matrix obtained by Cholesky decomposition of the covariance matrix of model parameters (θ) proposed in Table 6, and y is a realization of uncorrelated standard normal random variables vector.
5.2 Model Validation
One of the most important challenges in developing any model used for simulating natural phenomena is the model’s validation. The validity of our proposed model is examined via multiple approaches. In the first methodology, as described in the previous section, the model is used to simulate the remaining 20% of data as testing data, which were not used in the fitting processes. As shown in Fig. 9, the result of the simulation follows the overall trend of the observed data. Among different outputs of the model, including moment magnitude, site-to-source distance, and focal depth of events, the first one shows the highest correlation coefficients (R2) and, consequently, highest accuracy level, respectively.
For more guarantee, another validation process is considered. In this approach, for each of the GPPs, during its operation period, some months are selected randomly, including the 3rd, 5th, and 11th months of years 2011, 2014, and 2018 to check the accuracy of the proposed model. The mean and standard deviation of observed data (MW, D, and R) in these months are calculated. Then by applying the model and the Monte Carlo sampling method concurrently, and considering different numbers of samples in which 7, 25, 50, 100, 150, 200, 300, and 500 events are regenerated, the mean and standard deviation values from all samples are calculated. In Fig. 10, the mean and standard deviation values of output variables of the model (MW, D, and R) are compared with the target values of real observed data for different numbers of generated samples in the selected months. It is seen that among different variables, MW, R, and D converge faster, respectively. Generally, by generating more than 100 realizations, the Monte Carlo simulation results converge for all variables. In addition, the average error of simulated events for estimating the mean of moment magnitude, focal depth, and distance for all GPPs are 6.2%, 10.2%, and 13.4%, respectively, while these values for the standard deviation of variables are 27.2%, 18.5%, and 19.2%, respectively.
To achieve a higher reassurance level, the bootstrapping method (Efron and Tibshirani 1993) is adopted to validate the model. Accordingly, by using the Monte Carlo sampling approach, different sets (500) of observed data are selected from the recorded events per month for all GPPs. In each of the 500 samples, recorded events at randomly selected months are considered, and the model is used to estimate the target values (mean and standard deviation of parameters MW, D, and R for all events in a month) via the procedure that was described in the previous paragraph. The results, shown in Fig. 11, emphasize the acceptable accuracy of modeled events. Almost all of the estimated parameters are located in the range of mean ± standard deviation of the observed data, except a few data of focal depth and distance in Kawerau and Imperial GPPs. It is noteworthy that the proposed model is developed for the purpose of seismic risk assessment of buildings and structures via sampling methods such as Monte Carlo. In this case of seismic loss evaluation, the error of 0.1 to 0.3 in estimating the magnitude, or 1−2 km in estimating the distance of epicenter-to-GPP will not have a significant effect on seismic risk assessment results, which is shown in previous studies (Khansefid 2018, 2021). That is, the accuracy of the presented model is within the acceptable range.
As an example of the application of the proposed model for different ranges of injection rates by use of the Monte Carlo simulation approach (Hahn 1972), more than 18,000 scenarios of GPP-induced earthquake events are simulated and presented in Fig. 12. Each scenario contains all probable events per month. Accordingly, the number of events per month for each scenario, the corresponding moment magnitude, focal depth, and epicenter-to-GPP distances are shown. The moment magnitudes range between 1.5 to 3.0, the focal depths vary from 1.5 to 3.0 km, and the distances start from 3.0 km and go up to 12 km, which are all in the practical and probable range of GPP earthquakes. Such a simulation can be used as an input for the seismic risk assessment of buildings located near the GPP sites as a hazard input scenario.
6 Conclusion
This research dealt with the important challenge posed by induced seismicity initiated at geothermal power plants around the world. Accordingly, power plant information and the corresponding seismic data related to four important GPP zones worldwide were collected. These data are statistically analyzed, and their main characteristics, consisting of event magnitude, focal depth, and epicenter-to-GPP distance, are rigorously examined. From an engineering perspective, a probabilistic model was developed and validated that is capable of simulating random seismic events induced by GPPs. This model is a tool in the hand of the earthquake and structural engineers and scientists who are interested in evaluating the seismic risk of induced earthquakes by GPPs on the built environment via sampling methods such as Monte Carlo since it provides the opportunity to simulate future probable earthquake event scenarios.
Notes
The developed event database is accessible via email request from the corresponding author.
References
Allis, R.G., S.A. Currie, J.D. Leaver, and S. Sherburn. 1985. Results of injection testing at Wairakei geothermal field, New Zealand. In Proceedings of Geothermal Resource Council International Symposium on Geothermal Energy, 26 August 1985, Kailua Kona, HI, USA, 289–294.
Bachmann, C.E., S. Wiemer, B.P. Goertz‐Allmann, and J. Woessner. 2012. Influence of pore‐pressure on the event‐size distribution of induced earthquakes. Geophysical Research Letters 39(9): Article L09302.
Barth, A., F. Wenzel, and C. Langenbruch. 2013. Probability of earthquake occurrence and magnitude estimation in the post shut-in phase of geothermal projects. Journal of Seismology 17(1): 5–11.
Bay of Plenty Regional Council. 2018. Kawerau geothermal system management plan. Whakatane, New Zealand: Bay of Plenty Regional Council.
Bishop, C.M. 2007. Pattern recognition and machine learning. New York: Springer.
Broccardo, M., A. Mignan, F. Grigoli, D. Karvounis, A.P. Rinaldi, L. Danciu, H. Hofmann, and C. Milkereit et al. 2020. Induced seismicity risk analysis of the hydraulic stimulation of a geothermal well on Geldinganes, Iceland. Natural Hazards and Earth System Sciences 20(6): 1573–1593.
Bromley, C.J., C.F. Pearson, and D.M. Rigor Jr. 1987. Microearthquakes at the Puhagan geothermal field, Philippines—A case of induced seismicity. Journal of Volcanology and Geothermal Research 31(3–4): 293–311.
Brown, M.R., and S. Ge. 2018. Distinguishing fluid flow path from pore pressure diffusion for induced seismicity. Bulletin of the Seismological Society of America 108(6): 3684–3686.
California Department of Conservation. 2020. Geothermal production and injection data maps. https://www.conservation.ca.gov/calgem/geothermal/manual/Pages/production.aspx. Accessed 31 Aug 2020.
Charléty, J., N. Cuenot, L. Dorbath, C. Dorbath, H. Haessler, and M. Frogneux. 2007. Large earthquakes during hydraulic stimulations at the geothermal site of Soultz-sous-Forêts. International Journal of Rock Mechanics and Mining Sciences 44(8): 1091–1095.
Cheng, Y., and X. Chen. 2018. Characteristics of seismicity inside and outside the Salton Sea geothermal field. Bulletin of the Seismological Society of America 108(4): 1877–1888.
Convertito, V., H. Ebrahimian, O. Amoroso, F. Jalayer, R. De Matteis, and P. Capuano. 2021. Time-dependent seismic hazard analysis for induced seismicity: The case of St Gallen (Switzerland), geothermal field. Energies 14(10): Article 2747.
Convertito, V., N. Maercklin, N. Sharma, and A. Zollo. 2012. From induced seismicity to direct time-dependent seismic hazard. Bulletin of the Seismological Society of America 102(6): 2563–2573.
Cuenot, N., C. Dorbath, and L. Dorbath. 2008. Analysis of the microseismicity induced by fluid injections at the EGS site of Soultz-sous-Forêts (Alsace, France): Implications for the characterization of the geothermal reservoir properties. Pure and Applied Geophysics 165: 797–828.
Eberhart-Phillips, D., and D.H. Oppenheimer. 1984. Induced seismicity in the Geysers geothermal area, California. Journal of Geophysical Research: Solid Earth 89(B2): 1191–1207.
Edwards, B., and J. Douglas. 2014. Magnitude scaling of induced earthquakes. Geothermics 52: 132–139.
Efron, B., and R.J. Tibshirani. 1993. An introduction to the bootstrap. New York, USA: Chapman and Hall Press.
Ellsworth, W.L., D. Giardini, J. Townend, S. Ge, and T. Shimamoto. 2019. Triggering of the Pohang, Korea, earthquake (Mw 5.5) by enhanced geothermal system stimulation. Seismological Research Letters 90(5): 1844–1858.
Elster, C., K. Klauenberg, M. Walzel, G. Wübbeler, P. Harris, M. Cox, C. Matthews, I. Smith, et al. 2015. A guide to Bayesian inference for regression problem. Deliverable of EMRP project NEW04 “Novel mathematical and statistical approaches to uncertainty evaluation”. https://www.researchgate.net/publication/305302065_A_Guide_to_Bayesian_Inference_for_Regression_Problems. Accessed 10 May 2022.
Evans, K.F., A. Zappone, T. Kraft, N. Deichmann, and F. Moia. 2012. A survey of the induced seismic responses to fluid injection in geothermal and CO2 reservoirs in Europe. Geothermics 41: 30–54.
Fridleifsson, I.B., R. Bertani, E. Huenges, J.W. Lund, A. Ragnarsson, and L. Rybach. 2008. The possible role and contribution of geothermal energy to the mitigation of climate change. In Proceedings of IPCC Scoping Meeting on Renewable Energy Sources, 20–25 January 2008, Luebeck, Germany, 59–80.
Gelman, A., D. Rubin, D. Dunson, J.B. Carlin, and H.S. Stern. 2004. Bayesian data analysis. New York: CRC Press.
Geological Hazard Information for New Zealand. 2020. GeoNet Quake Search website. https://quakesearch.geonet.org.nz/. Accessed 31 Aug 2020.
Getman, D., A. Anderson, and C. Augustine. 2015. Geothermal prospector: Supporting geothermal analysis through spatial data visualization and querying tools. Geothermal Resources Council Transactions 39: 977–986.
Grünthal, G., R. Wahlström, and D. Stromeyer. 2009. The unified catalogue of earthquakes in central, northern, and northwestern Europe (CENEC)—Updated and expanded to the last millennium. Journal of Seismology 13(4): 517–541.
Gupta, R., and H. Shankar. 2018. Current list of geothermal power plants. Global Energy Observatory. http://globalenergyobservatory.org/list.php?db=PowerPlants&type=Geothermal. Accessed 31 Aug 2020.
Gutenberg, B., and C.F. Richter. 1954. Seismicity of the earth and associated phenomena. Princeton, NJ: Princeton University Press.
Hahn, G.J. 1972. Sample sizes for Monte Carlo simulation. IEEE Transactions on Systems, Man, and Cybernetics SMC-2(5): 678–680.
Halldorsson, B., S. Olafsson, J.T. Snaebjörnsson, S.U. Sigurosson, R. Rupakhety, and R. Sigbjörnsson. 2012. On the effects of induced earthquakes due to fluid injection at Hellisheidi geothermal power plant, Iceland. In Proceedings of 15th World Conference on Earthquake Engineering (15WCEE), 24–28 September 2012, Lissabon, Portugal.
International Seismological Centre. 2020. ISC bulletin: Event catalogue search. http://www.isc.ac.uk/iscbulletin/search/catalogue/. Accessed 30 Aug 2020.
Jeffreys, H. 1967. Theory of probability. International series of monographs on physics. Oxford: Clarendon Press.
Khansefid, A. 2018. Probabilistic optimization of structures equipped with active vibration control systems under probable mainshock-aftershock sequences of the Iranian Plateau. PhD dissertation. Sharif University of Technology, Tehran, Iran (in Persian).
Khansefid, A. 2021. Lifetime risk-based seismic performance assessment of buildings equipped with supplemental damping and base isolation systems under probable mainshock-aftershock scenarios. Structures 34: 3647–3666.
Khansefid, A., A. Bakhshi, and A. Ansari. 2019. Empirical predictive model for generating synthetic non-stationary stochastic accelerogram of the Iranian plateau: Including far- and near-field effects as well as mainshock and aftershock categorization. Bulletin of Earthquake Engineering 17(7): 3681–3708.
Khansefid, A., S.M. Yadollahi, G. Müller, F. Taddei, and A. Kumawat. 2022a. Seismic performance assessment of a masonry building under earthquakes induced by geothermal power plants operation. Journal of Building Engineering 48: Article 103909.
Khansefid, A., S.M. Yadollahi, G. Müller, and F. Taddei. 2022b. Ground motion models for the induced earthquakes by the geothermal power plants activity. Journal of Earthquake Engineering. https://doi.org/10.1080/13632469.2022.2084475.
Kijko, A. 2004. Estimation of the maximum earthquake magnitude, mmax. Pure and Applied Geophysics 161(8): 1655–1681.
Kraft, T., P.M. Mai, S. Wiemer, N. Deichmann, J. Ripperger, P. Kästli, C. Bachmann, and D. Fäh et al. 2011. Enhanced geothermal systems: Mitigating risk in urban areas. Eos, Transactions American Geophysical Union 90(32): 273–274.
Kwiatek, G., P. Martínez-Garzón, G. Dresen, M. Bohnhoff, H. Sone, and C. Hartline. 2015. Effects of long-term fluid injection on induced seismicity parameters and maximum magnitude in northwestern part of the Geysers geothermal field. Journal of Geophysical Research: Solid Earth 120(10): 7085–7101.
Langenbruch, C., and M.D. Zoback. 2016. How will induced seismicity in Oklahoma respond to decreased saltwater injection rates? Science Advances 2(11): Article 1601542.
Langenbruch, C., W.L. Ellsworth, J.U. Woo, and D.J. Wald. 2020. Value at induced risk: Injection‐induced seismic risk from low‐probability, high‐impact events. Geophysical Research Letters 47(2): Article e2019GL085878.
Leptokaropoulos, K., and M. Staszek. 2019. Temporal response of magnitude distribution to fluid injection rates in the Geysers geothermal field. Acta Geophysica 67(1): 327–339.
Majer, E.L., R. Baria, M. Stark, S. Oates, J. Bommer, B. Smith, and H. Asanuma. 2007. Induced seismicity associated with enhanced geothermal systems. Geothermics 36(3): 185–222.
Marsaglia, G., and W.W. Tsang. 2000. The Ziggurat method for generating random variables. Journal of Statistical Software 5(8): 1–7.
Megies, T., and J. Wassermann. 2014. Microseismicity observed at a non-pressure-stimulated geothermal power plant. Geothermics 52: 36–49.
Mignan, A., D. Landtwing, P. Kästli, B. Mena, and S. Wiemer. 2015. Induced seismicity risk analysis of the 2006 Basel, Switzerland, enhanced geothermal system project: Influence of uncertainties on risk mitigation. Geothermics 53: 133–146.
Nicol, A., R. Carne, M. Gerstenberger, and A. Christophersen. 2011. Induced seismicity and its implications for CO2 storage risk. Energy Procedia 4: 3699–3706.
Ogata, Y., and K. Katsura. 1993. Analysis of temporal and spatial heterogeneity of magnitude frequency distribution inferred from earthquake catalogues. Geophysical Journal International 113(3): 727–738.
Pasari, S. 2019. Inverse gaussian versus lognormal distribution in earthquake forecasting: Keys and clues. Journal of Seismology 23(3): 537–559.
Pester, S., T. Agemar, J.A. Alten, J. Kuder, K. Kuehne, A.A. Maul, and R. Schulz. 2010. GeotIS—The geothermal information system for Germany. In Proceedings of the World Geothermal Congress 2010, 25–29 April 2010, Bali, Indonesia.
Ristau, J. 2009. Comparison of magnitude estimates for New Zealand earthquakes: Moment magnitude, local magnitude, and teleseismic body-wave magnitude. Bulletin of the Seismological Society of America 99(3): 1841–1852.
Shapiro, S.A., C. Dinske, and J. Kummerow. 2007. Probability of a given‐magnitude earthquake induced by a fluid injection. Geophysical Research Letters 34(22): Article L22314.
Shapiro, S.A., C. Dinske, C. Langenbruch, and F. Wenzel. 2010. Seismogenic index and magnitude probability of earthquakes induced during reservoir fluid stimulations. The Leading Edge 29(3): 304–309.
Shapiro, S.A., O.S. Krüger, and C. Dinske. 2013. Probability of inducing given-magnitude earthquakes by perturbing finite volumes of rocks. Journal of Geophysical Research: Solid Earth 118(7): 3557–3575.
Staudenmaier, N., T. Tormann, B. Edwards, N. Deichmann, and S. Wiemer. 2018. Bilinearity in the Gutenberg-Richter relation based on ML for magnitudes above and below 2, from systematic magnitude assessments in Parkfield (California). Geophysical Research Letters 45(14): 6887–6897.
United States Geological Survey. 2020. Search earthquake catalog. https://earthquake.usgs.gov/earthquakes/search/. Accessed 31 Aug 2020.
Woessner, J., J. Hardebeck, and E. Hauksson. 2010. Theme IV—Understanding seismicity catalogs and their problems. http://www.corssa.org/export/sites/corssa/.galleries/articles-pdf/Mignan-Woessner-2012-CORSSA-Magnitude-of-completeness.pdf. Accessed 20 Apr 2022.
Woessner, J., and S. Wiemer. 2005. Assessing the quality of earthquake catalogues: Estimating the magnitude of completeness and its uncertainty. Bulletin of the Seismological Society of America 95(2): 684–698.
Zastrow, M. 2019. South Korea accepts geothermal plant probably caused destructive quake. Nature. https://doi.org/10.1038/d41586-019-00959-4.
Acknowledgments
The authors express their sincere gratitude to the TUM Talent Factory division of the Technical University of München for its support by providing a TUM University Foundation Fellowship for Dr. Ali Khansefid.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Khansefid, A., Yadollahi, S.M., Müller, G. et al. Induced Earthquake Hazard by Geothermal Power Plants: Statistical Evaluation and Probabilistic Modeling. Int J Disaster Risk Sci 13, 758–777 (2022). https://doi.org/10.1007/s13753-022-00441-2
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13753-022-00441-2