Abstract
This paper presents the lubrication performance analyses of journal bearing using the fluid–structure coupling method, whereas realistic features of cavitation and deformation are accounted for. The multiphase flow model of journal bearing is established with a mixture model considering both cavitation and thermal effects. Moreover, the hydrodynamic characteristics of journal bearing with cavitation are analyzed with the proposed multiphase flow model and the maximum difference is less than 6% between the simulation results and experimental data, which is then verified through a demonstrative application example. Furthermore, the effects of eccentricity ratio, rotational speed and oil-film thickness on the elastohydrodynamic characteristics of journal bearing with different groove shapes are numerically investigated. The numerical results suggest that groove shapes and operating conditions play the crucial roles in changing the elastohydrodynamic characteristics of journal bearing. The change of groove shapes can improve the load-carrying capacity of journal bearing and decrease the average temperature of oil film.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Deligant, M.; Podevin, P.; Descombes, G.: CFD model for turbochanger journal bearing performances. Appl. Therm. Eng. 31, 811–819 (2011)
Shimpi, M.E.; Deheri, G.M.: Ferrofluid lubrication of rotating curved rough porous circular plates and effect of bearing’s deformation. Arab. J. Sci. Eng. 38, 2865–2874 (2013)
Wang, Y.Q.; Shi, X.J.; Zhang, L.J.: Experimental and numerical study on water-lubricated rubber bearings. Ind. Lubr. Tribol. 66, 282–288 (2014)
Feng, H.; Jiang, S.: Dynamic analysis of water-lubricated motorized spindle considering tilting effect of thrust bearing. Proc. Inst. Mech. Eng. (2016)
Zhang, M.; Yang, J.; Xu, W.: Leakage and rotordynamic performance of a mixed labyrinth seal compared with that of a staggered labyrinth seal. J. Mech. Sci. Technol. 31(5), 2261–2277 (2017)
Yang, J.; Guo, R.; Tian, Y.: Hybrid radial basis function/finite element modeling of journal bearing. Tribol. Int. 41(12), 1169–1175 (2008)
Scaraggi, M.; Comingio, D.; Lorenzis, L.D.: The influence of geometrical and rheological non-linearity on the calculation of rubber friction. Tribol. Int. 101, 402–413 (2016)
Feng, H.; Jiang, S.: Dynamics of a motorized spindle supported on water-lubricated bearings. Proc. Inst. Mech. Eng. Part C 231(3), 459–472 (2017)
Knight, J.D.; Ghadimi, P.: Analysis and observation of cavities in a journal bearing considering flow continuity. Tribol. Trans. 44, 88–96 (2001)
Pierre, I.; Bouyer, J.; Fillon, M.: Thermohydrodynamic behavior of misaligned plain journal bearings: theoretical and experimental approaches. Tribol. Trans. 47, 594–604 (2004)
Singh, U.; Roy, L.; Sahu, M.: Steady-state thermo-hydrodynamic analysis of cylindrical fluid film journal bearing with an axial groove. Tribol. Int. 41, 1135–1144 (2008)
Roy, L.; Laha, S.K.: Steady state and dynamic characteristics of axial grooved journal bearings. Tribol. Int. 42, 754–761 (2009)
Durany, J.; Pereira, J.; Varas, F.: Dynamical stability of journal-bearing devices through numerical simulation of thermohydrodynamic models. Tribol. Int. 43, 1703–1718 (2010)
Boubendir, S.; Larbi, S.; Bennacer, R.: Numerical study of the thermo-hydrodynamic lubrication phenomena in porous journal bearings. Tribol. Int. 44, 1–8 (2011)
Brito, F.P.; Miranda, A.S.; Claro, J.C.P.; Fillon, M.: Experimental comparison of the performance of a journal bearing with a single and a twin axial groove configuration. Tribol. Int. 54, 1–8 (2012)
Hu, J.; Wu, W.; Wu, M.; Yuan, S.: Numerical investigation of the air–oil two-phase flow inside an oil-jet lubricated ball bearing. Int. J. Heat Mass Transf. 68, 85–93 (2014)
Gao, S.; Cheng, K.; Chen, S.: CFD based investigation on influence of orifice chamber shapes for the design of aerostatic thrust bearings at ultra-high speed spindles. Tribol. Int. 92, 211–221 (2015)
Nair, K.P.; Nair, V.P.S.; Jayadas, N.H.: Static and dynamic analysis of elastohydrodynamic elliptical journal bearing with micropolar lubricant. Tribol. Int. 40, 297–305 (2007)
Jiang, S.; Yang, S.; Yin, Z.: Static and dynamic characteristics of externally pressurized annular porous gas thrust bearings. Proc. Inst. Mech. Eng. Part J 230(10), 1221–1230 (2016)
Nair, V.P.S.; Nair, K.P.: Finite element analysis of elastohydrodynamic circular journal bearing with micropolar lubricants. Finite Elem. Anal. Des. 41, 75–89 (2004)
Suy, F.C.; Lagemann, V.; Fusser, H.J.: The transient elastohydrodynamic friction analysis of main bearings. Life Cycle Tribol. 48, 617–626 (2005)
Liu, H.; Xu, H.; Ellison, P.J.; Jin, Z.: Application of computational fluid dynamics and fluid–structure interaction method to the lubrication study of a rotor-bearing system. Tribol. Lett. 38, 325–336 (2010)
Lin, Q.; Wei, Z.; Wang, N.; Chen, W.: Analysis on the lubrication performances of journal bearing system using computational fluid dynamics and fluid–structure considering thermal influence and cavitation. Tribol. Int. 64, 8–15 (2013)
Meng, F.M.; Zhang, L.; Liu, Y.; Li, T.T.: Effect of compound dimple on tribological performances of journal bearing. Tribol. Int. 91, 99–110 (2015)
Dhande, D.Y.; Pande, D.W.: Multiphase flow analysis of hydrodynamic journal bearing using CFD coupled fluid structure interaction considering cavitation. J. King Saud Univ. Eng. Sci. (2016)
Costa, L.; Fillon, M.: An experimental investigation of the effect of groove location and supply pressure on THD performance of a steadily loaded journal bearing. J. Tribol. 122, 227–232 (2000)
Kasolang, S.; Ahmad, M.A.: Preliminary study of pressure profile in hydrodynamic lubrication journal bearing. Procedia Eng. 41, 1743–1749 (2012)
Shyu, S.H.; Jeng, Y.R.; Li, F.L.: A legendre collocation method for thermohydrodynamic journal-bearing problems with Elrod’s cavitation algorithm. Tribol. Int. 41, 493–501 (2008)
Kuznetsov, E.; Glavatskih, S.: Dynamic characteristics of compliant journal bearings considering thermal effects. Tribol. Int. 94, 288–305 (2016)
Nada, G.S.; Osman, T.A.: Static performance of finite hydrodynamic journal bearings lubricated by magnetic fluids with couple stresses. Tribol. Lett. 27, 261–268 (2007)
Gertzos, K.P.; Nikolapoulos, P.G.; Papadopoulos, C.A.: CFD analysis of journal bearing hydrodynamic lubrication by Bingham lubricant. Tribol. Int. 41, 1190–1204 (2008)
Xu, W.; Yang, J.: An approximate solution of muijderman’s model for performance calculation of spiral grooved gas seal. J. Tribol. 139, 051706-1-051706-6 (2017)
Chauhan, A.; Sehgal, R.; Sharma, R.K.: Thermohydrodynamic analysis of elliptical journal bearing with different grade oils. Tribol. Int. 43, 1970–1977 (2010)
Zhang, Z.S.; Yang, Y.M.; Dai, X.D.; Xie, Y.B.: Effects of thermal boundary conditions on plain journal bearing thermohydrodynamic lubrication. Tribol. Trans. 56, 759–770 (2013)
Sander, D.E.; Allmaier, H.; Priebsch, H.H.: Impact of high pressure and shear thinning on journal bearing friction. Tribol. Int. 81, 29–37 (2015)
Wu, W.; Xiong, Z.; Hu, J.; Yuan, S.: Application of CFD to model oil-air flow in a grooved two-disc system. Int. J. Heat Mass Transf. 91, 293–301 (2015)
Zhang, L.; Qian, Z.; Deng, J.; Yin, Y.: Fluid–structure interaction numerical simulation of thermal performance and mechanical property on plate-fins heat exchanger. Heat Mass Transf. 51, 1337–1353 (2015)
Zou, D.; Zhang, J.; Ta, N.; Rao, Z.: The hydroelastic analysis of marine propellers with consideration of the effect of the shaft. Ocean Eng. 131, 95–106 (2017)
Thomsen, K.; Klit, P.: A study on compliant layers and its influence on dynamic response of a hydrodynamic journal bearing. Tribol. Int. 44, 1872–1877 (2011)
Li, Q.; Liu, S.; Pan, X.; Zheng, S.: A new method for studying the 3D transient flow of misaligned journal bearings in flexible rotor-bearing systems. J. Zhejiang Univ. Sci. A 13(4), 293–310 (2013)
Xu, W.; Yang, J.: Spiral-grooved gas face seal for steam turbine shroud tip leakage reduction: performance and feasibility analysis. Tribol. Int. 98, 242–252 (2016)
Gao, G.; Yin, Z.; Jiang, D.; Zhang, X.: Numerical analysis of plain journal bearing under hydrodynamic lubrication by water. Tribol. Int. 75, 31–38 (2014)
Acknowledgements
This work is supported by the “National Natural Science Foundation of China (No. 51705215),” “Natural Science Foundation of Jiangsu Province (No. BK20170824)” and the “Fundamental Research Funds for the Central Universities” (No. 30917011343).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Chen, Y., Sun, Y., He, Q. et al. Elastohydrodynamic Behavior Analysis of Journal Bearing Using Fluid–Structure Interaction Considering Cavitation. Arab J Sci Eng 44, 1305–1320 (2019). https://doi.org/10.1007/s13369-018-3467-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13369-018-3467-9