Abstract
Nuclear power product manufactories are continually striving to reduce both the amount and the cost of product maintenance, whilst at the same time ensuring that the nuclear power product safety, reliability, and integrity are not compromised. The demand for high-quality and low-cost products with short development time, especially for complex nuclear power products, e.g., nuclear power reheat valve, has forced the product development team to focus on the various effective product development strategies. In this paper, authors explore the applicability of knowledge-based technologies to competitive new reheat valve product design and development. Based on the proposed approach and methodologies, a web-based and service-oriented system supporting new reheat valve product design has been developed, which can assist inexperienced users to perform failure modes and effects analysis (FMEA) analysis,and most important, to get knowledge stored in database for future quality and reliability improvement. The system will help to enhance new reheat valve product stability at the stage of product conceptual design. A framework of system based on FMEA approach for new reheat valve product design is proposed in this paper.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Ogawa S., Piller F.: Reducing the risks of new product development. MIT Sloan Manage. Rev. 47, 65–72 (2006)
Puente J., Pino R., Priore P., de la Fuente D.: A decision support system for applying failure mode and effects analysis. Intern. J. Qual. Reliab. Manage. 19(2), 137–150 (2002)
Braglia M., Frosolini M., Montannari R.: Fuzzy criticality assessment model for failure modes and effect analysis. Int. J. Qual. Reliab. Manage. 20(4), 503–524 (2003)
Liao T.W.: An investigation of a hybrid CBR method for failure mechanisms identification. Eng. Appl. Artif. Intell. 17, 123–134 (2004)
Teoh P.C., Case K.: An evaluation of failure modes and effect analysis generating method for conceptual design. Int. J. Comput. Integr. Manuf. 18(4), 279–293 (2005)
Russomanno D.J., Bonnell R.D., Bowles J.B.: Viewing computer-aided failure mode and effects analysis from an artificiall intelligence perspective. Integr. Comput. Aid. Design 1(3), 209–228 (2005)
Barkai, J.: Automatic generation of a diagnostic expert system from failure mode and effects analysis (FMEA) information [M.]. SAE Technical Paper Series (1999)
Kennedy, R.; Kirwan, B.: Development of a hazard and operability-based method for identifying safety management vulnerabilities in high risk systems. Saf. Sci. 30, 249–274 (1998)
Loch, C.H.; Terwiesch, C.: Communication and uncertainty in concurrent engineering, Manage. Sci. 44, 1032–1048 (1998)
Price, C.J.; Taylor, N.S.: Automated multiple failure FMEA. Reliab. Eng. Syst. Saf. 76(1), 1–10 (2002)
Franceschini, F.; Galetto, M.: A new approach for evaluation of risk priorities of failure modes in FMEA. Int. J. Prod. Res. 39(13), 2991–3002 (2001)
Garcia, A.A.; Schirru, R.; Melo, P.F.: A fuzzy DEA approach for FMEA. Profess in Nuclear Energy 46(3–4), 359–373 (2005)
Xu, K.; Tang, L.C.; Xie, M.; Ho, S.L.; Zhu, M.L.: Fuzzy assessment of FMEA for engine systems. Reliab. Eng. Syst. Saf. 75(1), 17–29 (2002)
Liao, S.-H.: Knowledge management technologies and applications-literature review from 1995 to 2002. Expert Syst. Appl. 25, 155–164 (2003)
Tyndale P.: A taxonomy of knowledge management software tools: origins and applications. Eval. Prog. Plan. 25, 183–190 (2002)
Laudon K.C., Laudon J.P.: Essential of Management Information Systems, 5th edn. Prentice Hall, New Jersey (2002)
McFadden F.R., Hoffer J.A., Prescott M.B.: Modern Database Management, 5th edn. Prentice-Hall, New York (2000)
Lalla, T.R.M.; Lewis, W.G.; Pun, K.F.; Chin, K.S.; Lau, H.C.W.: Manufacturing strategy, total quality management and performance measurement: an integrated model. Int. J. Manuf. Technol. Manag. 5(5/6), 414–427 (2003)
Tam, S.M.; Kwong, C.K.; Ip, W.H.: A hybrid artificial intelligence system for optical lens design. Int. J. Comput. Appl. Technol. 13(3–5), 229–236 (2000)
Ong, Y.S.; Keane, A.J.: A domain knowledge based search advisor for design problem solving environments. Eng. Appl. Artif. Intell. 15, 105–116 (2002)
Knoglu, A.; Arditi, D.: An integrated automation system for design/build organizations. Int. J. Comp. Appl. Technol. 20(1–3), 3–14 (2004)
Chin, K.-S.; Chan, A.; Yang, J.-B.: Development of a fuzzy FMEA based product design system. Int. J. Adv. Manuf. Technol. 36, 633–649 (2008)
Arabian-Hoseynabadi, H.; Oraee, H.; Tavner, P.J.: Failure modes and effects analysis (FMEA) for wind turbines. Electr. Power Ener. Syst. 32, 817–824 (2010)
Garcia, P.A.A.; Schirru, R.; Frutuoso, P.F.; Melo, E.: A fuzzy data envelopment analysis approach for FMEA. Progr. Nucl. Energ. 46(3–4), 359–373 (2005)
United States Department of Defense. MIL-STD-1629A—military standard procedures for performing a failure mode, effects and criticality analysis, System Reliability Center PDF Directory. http://src.alionscience.com/pdf/MIL-STD-1629RevA.pdf, 24th November, 1980
Arabian-Hoseynabadi H., Oraee H., Tavner P.J.: Failure Modes and Effects Analysis (FMEA) for wind turbines. Electr. Power Energ. Syst. 32, 817–824 (2010)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wu, Z., Ming, X.G., Song, W. et al. Nuclear Product Design Knowledge System Based on FMEA Method in New Product Development. Arab J Sci Eng 39, 2191–2203 (2014). https://doi.org/10.1007/s13369-013-0726-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13369-013-0726-7