Abstract
The impact of microwave sweeper power fluctuation in the BOTDA system has been theoretically analyzed and experimentally tested. And a novel method comparing real-time acquisition of probe wave power with a new algorithm to realize probe wave power normalization for eliminating this impact was proposed. The principle of the proposed method was described theoretically. And the contrast test between our new method and conventional one was carried out. The experiment results indicated that the temperature accuracy was effectively improved from ±5 °C to ±2 °C.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Reference
X. P. Zhang, Y. G. LU, F. Wang, H. Liang, and Y. X. Zhang, “Development of fully-distributed fiber sensors based on Brillouin scattering,” Photonic Sensors, 2011, 1(1): 54–61.
W. J. Wang, J. Chang, G. P. Lv, Z. L. Wang, Z. Liu, S. Luo, et al., “Wavelength dispersion analysis on fiber-optic Raman distributed temperature sensor system,” Photonic Sensors, 2013, 3(3): 256–261.
Y. K. Dong, L. Chen, and X. Y. Bao, “Time-division multiplexing-based BOTDA over 100 km sensing length,” Optics Letters, 2011, 36( 2): 277–279.
S. R. Cui, S. Pamukcu, A. X. Lin, W. Xiao, D. Herr, J. Toulouse, and M. Pervizpour, “Distributed temperature sensing system based on Rayleigh scattering BOTDA,” IEEE Sensors Journal, 2011, 11(2): 399–403.
W. R. Habel and K. Krebber, “Fiber-optic sensor applications in civil and geotechnical engineering,” Photonic Sensors, 2011, 1(3): 268–280.
Y. Peled, A. Motil, L. Yaron, and M. Tur, “Slope-assisted fast distributed sensing in optical fibers with arbitrary Brillouin profile,” Optics Express, 2011, 19(21): 19845–19865.
J. Urricelqui, A. Zornoza, M. Sagues, and A. Loayssa, “Dynamic BOTDA measurements based on Brillouin phase-shift and RF demodulation,” Optics Express, 2012, 20(24): 26942–26949.
X. H. Jia, Y. J. Rao, K. Deng, Z. X. Yang, L. Chang, C. Zhang, et al., “Experimental demonstration on 2.5-m spatial resolution and 1 ° temperature uncertainty over long-distance BOTDA with combined Raman amplification and optical pulse coding,” IEEE Photonics Technology, 2011, 23(7): 435–437.
J. B. Wang, Y. G. Lu, X. P. Zhang, and F. Wang, “Calibration of reference light power in Brillouin optical time domain reflectometer,” Chinese Journal of Lasers, 2010, 37(6): 1456–1461.
H. J. Zhou, Z. Meng, and Y. Liao, “Frequency shift characteristics analysis of LiNbO3 waveguide electro-opticIntensity,” Chinese Journal of Lasers, 2009, 36(4): 901–905.
C. Bao, M. P. Song, and X. F. Ye, “Polarization control techniques in the Brillouin optical time domain analyzer,” Chinese Journal of Sensors and Actuators, 2010, 23(2): 201–204.
M. A. Soto, G. Bolognini, and F. D. Pasquale, “Analysis of pulse modulation format in coded BOTDA sensors,” Optics Express, 2010, 18(14): 14878–14892.
Author information
Authors and Affiliations
Corresponding author
Additional information
This article is published with open access at Springerlink.com
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 2.0 International License (https://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
About this article
Cite this article
Jiang, S., Chang, J., Zhang, S. et al. A method for eliminating the impact of microwave sweeper power fluctuation in BOTDA system. Photonic Sens 4, 86–91 (2014). https://doi.org/10.1007/s13320-013-0149-9
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13320-013-0149-9