Abstract
Fracture resistance is of primary concern in the seismic design of beam-to-column connections in steel moment resisting frames (SMRFs). Micromechanics based fracture models such as the void growth model (VGM) and the stress modified critical strain (SMCS) model provide alternative approaches for ductile fracture prediction by relating micro-mechanisms of void nucleation, growth and coalescence to macroscopic stresses and strains. In this study, the VGM and SMCS models were calibrated for Q345 structural steel and the corresponding weld, through smooth notched tensile (SNT) tests and complementary continuum finite element models (FEMs). A series of seven local connections representing beam-to-column connections in SMRFs were tested under monotonic tensile loading and the specimen elongations at fracture critical point were obtained. The traditional J-integral based fracture mechanics and micromechanics based fracture models (VGM and SMCS) were applied to predict fracture in each tested local connection through refined three-dimensional FEM. Comparisons between these numerical approaches and experimental observations in prediction of fracture critical displacement, indicated that the VGM and SMCS models were able to predict fracture of welded connection with good accuracy, while the J-integral based approach resulted in quite conservative fracture prediction. This paper has bridged the gap between small-scale material tests and large-scale structural experiments in fracture evaluations.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
ABAQUS (2008). ABAQUS User’s Manual, Version 6.8. Hibbitt, Karlsson and Sorenson, Inc., Providence, RI.
Anderson, T. L. (2004). Fracture mechanics: Fundamentals and applications, 3 rd Ed.. CRC Press, Boca Raton, Fla.
Barsom, J. M. (2002). “Development of fracture toughness requirements for weld metals in seismic applications.” Journal of Materials in Civil Engineering, 14(1), pp. 44–49.
Chen, C. C., Lin, C. C., and Tsai, C. L. (2004). “Evaluation of reinforced connections between steel beams and box columns.” Engineering Structures, 26(13), pp. 1889–1904.
Chen, C. C., Lin, C. C., and Lin, C. H. (2006). “Ductile moment connections used in steel column-tree momentresisting frames.” Journal of Constructional Steel Research, 62(8), pp. 793–801.
Chen, H., Shi, Y. J., and Wang, Y. Q. (2004a). “Fracture toughness properties of moment resistant column-beam connections Part I: elastic analysis.” International Journal of Steel Structures, 4(1), pp. 1–7.
Chen, H., Shi, Y. J., and Wang, Y. Q. (2004b). “Fracture toughness properties of moment resistant column-beam connections Part II: inelastic analysis.” International Journal of Steel Structures, 4(1), pp. 9–14.
Chi, W. M. and Deierlein, G. G. (2000). Integration of analytical investigations on the fracture behavior of welded moment resisting connections. Blume Center TR136, Stanford University, Stanford, CA.
Chi, W. M., Kanvinde, A. M., and Deierlein, G. G. (2006). “Prediction of ductile fracture in steel connections using SMCS criterion.” Journal of Structural Engineering, 132(2), pp. 171–181.
GB/T 228 (2002). Metallic materials — Tensile testing at ambient temperature. Standards Press of China, Beijing (in Chinese).
GB/T 21143 (2007). Metallic materials — Unified method of test for determination of quasistatic fracture toughness. Standards Press of China, Beijing (in Chinese).
Hancock, J. W. and Mackenzie, A. C. (1976). “On the mechanics of ductile failure in high-strength steel subjected to multi-axial stress-states.” Journal of Mechanics and Physics of Solids, 24(3), pp. 147–169.
Jones, S. L., Fry, G. T., and Engelhardt, M. D. (2002). “Experimental evaluation of cyclically loaded reduced beam section moment connections.” Journal of Structural Engineering, 128(4), pp. 441–451.
Kanvinde, A. M. and Deierlein, G. G. (2004). Micromechanical simulation of earthquake induced fracture in steel structures. Blume Center TR145, Stanford University, Stanford, CA.
Kanvinde, A. M. and Deierlein, G. G. (2006). “Void growth model and stress modified critical strain model to predict ductile fracture in structural steels.” Journal of Structural Engineering, 132(12), pp. 1907–1918.
Kanvinde, A. M. and Deierlein, G. G. (2007). “Finiteelement simulation of ductile fracture in reduced section pull-plates using micromechanics-based fracture models.” Journal of Structural Engineering, 133(5), pp. 656–664.
Kanvinde, A. M., Fell, B. V., Gomez, I. R., and Roberts, M. (2008). “Predicting fracture in structural fillet welds using traditional and micromechanical fracture models.” Engineering Structures, 30(11), pp. 3325–3335.
Kanvinde, A. M., Gomez, I. R., Roberts, M., Fell, B. V., and Grondin, G. Y. (2009). “Strength and ductility of fillet welds with transverse root notch.” Journal of Constructional Steel Research, 65(4), pp. 948–958.
Liao, F. F. and Wang, W. (2010). “Parameter calibrations of micromechanics-based fracture models of Q345 steel.” Sciencepaper Online. 〈http://www.paper.edu.cn/index.php/default/releasepaper/content/201007-457〉
Liu, Y. M., Zhang, Y. J., Chen, Y. Y., and Chen, Y. J. (2002). “Experimental research on fracture performance in weld heat-affect zone.” Chinese Quarterly of Mechanics, 23(2), pp. 157–163 (in Chinese).
Matos, C. G. and Dodds, R. H. Jr. (2001). “Probabilistic modeling of weld fracture in steel frame connections part I: quasi-static loading.” Engineering Structures, 23(8), pp. 1011–1030.
Matos, C. G. and Dodds, R. H. Jr. (2002) “Probabilistic modeling of weld fracture in steel frame connections part II: seismic loading.” Engineering Structures, 24(6), pp. 687–705.
McClintock, F. A. (1968). “A criterion for ductile fracture by the growth of holes.” Journal of Applied Mechanics, 35(2), pp. 363–371.
Rice, J. R. and Tracey, D. M. (1969). “On the ductile enlargement of voids in triaxial stress fields.” Journal of Mechanics and Physics of Solids, 17(3), pp. 201–217.
Ricles, J. M., Fisher, J. W., Lu, L. W., and Kaufmann, E. J. (2002). “Development of improved welded moment connections for earthquake-resistant design.” Journal of Constructional Steel Research, 58(5–8), pp. 565–604.
Righiniotis, T. D., Lancaster, E. R., and Hobbs, R. E. (2000). “Fracture strength of a moment resisting welded connection under combined loading Part I — Formulation.” Journal of Constructional Steel Research, 56(1), pp. 17–30.
Righiniotis, T. D. and Hobbs, R. E. (2000). “Fracture strength of a moment resisting welded connection under combined loading Part II — Results.” Journal of Constructional Steel Research, 56(1), pp. 31–45.
Stojadinović, B., Goel, S. C., Lee, K. H., and Choi, J. H. (2000). “Parametric tests on unreinforced steel moment connections.” Journal of Structural Engineering, 126(1), pp. 40–49.
Uang, C. M., Yu, Q. S., Noel, S., and Gross, J. (2000). “Cyclic testing of steel moment connections rehabilitated with RBS or welded haunch.” Journal of Structural Engineering, 126(1), pp. 57–68.
Wang, Y. Q., Zhou, H., Shi, Y. J., and Chen, H. (2010). “Fracture behavior analyses of welded beam-to-column connections based on elastic and inelastic fracture mechanics.” International Journal of Steel Structures, 10(3), pp. 253–265.
Wu, Y. M. (2004). Research for mechanism of brittle fracture of structural steel and its engineering design method. Ph.D. Dissertation, Tsinghua University, Beijing, China (in Chinese).
Wu, Y. M., Wang, Y. Q., Shi, Y. J., and Jiang, J. J. (2004). “Effects of low temperature on properties of structural steels.” Journal of University of Science and Technology Beijing, 11(5), pp. 442–448.
Author information
Authors and Affiliations
Corresponding author
Additional information
Note.-Discussion open until February 1, 2012.
Rights and permissions
About this article
Cite this article
Wang, Y., Zhou, H., Shi, Y. et al. Fracture prediction of welded steel connections using traditional fracture mechanics and calibrated micromechanics based models. Int J Steel Struct 11, 351–366 (2011). https://doi.org/10.1007/s13296-011-3010-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13296-011-3010-2