Abstract
Orthotropic steel decks gradually come into general use in long span bridges due to various advantages such as dead weight reduction, easy quality control, and so on. On the other hand, stress concentration is often observed near the connection details, which may lead to fatigue problems and govern the design of the structure. Therefore, researches to understand the structural behaviors and examine stress distribution of details in orthotropic steel decks are required in order to develop an optimal connection detail. In this paper, optimal parameters regarding height, thickness and shear area of a cross-beam and efficiency and shapes of bulkhead plates are characterized by analytical studies and verified by experiments, so that fatigue cracks could be prevented.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
AASHTO (2007). AASHTO LRFD Bridge Design Specifications. American Association of State Highway and Transportation Officials, Washington D.C., USA.
Bocchieri, W. J. and Fisher, J. W. (1998). Williamsburg bridge replacement orthotropic deck as-built fatigue test. ATLSS Report No. 98-04, Lehigh University, Bethlehem, PA, USA.
Connor, R. J., Richards, S. O., and Fisher, J. W. (2003). Long-term Monitoring of Prototype Orthotropic Deck Panels on the Bronx-Whitestone Bridge for Fatigue Evaluation in Recent Developments in Bridge Engineering. A. A. Balkema, New York, NY, USA, pp. 257–268.
Dexter, R. J. and Fisher, J. W. (1997). “Fatigue cracking of orthotropic decks.” Proc. IABSE workshop: evaluation of existing steel and composite bridges, International Association for Bridge and Structural Engineering, Innsbruck, Austria.
Fuchs, H. O. and Stephens, R. I. (1980). Metal Fatigue in Engineering. Wiley, New York, NY, USA.
KSCE (2010). Design Specifications for Highway Bridges. Korean Society of Civil Engineers, Seoul, Korea (in Korean).
KSSC (2010). Design Specifications for Steel Structures. Korean Society of Steel Construction, Seoul, Korea (in Korean).
Mangus, A. R. and Sun, S. (1999). “Orthotropic Deck Bridges.” Bridge Engineering Handbook, CRC Press, Boca Raton, FL, USA.
MOCT (2006). Guide Lines for the Design of Details of Steel Highway Bridges. Ministry of Construction and Transportation, Kyonggi-do, Korea (in Korean).
Rolf, S. T. and Barsom, J. M. (1977). Fracture and Fatigue Control in Structures-Application of Fracture Mechanics. Prentice-Hall Inc., Englewood Cliffs, NJ, USA.
Tsakopoulos, P. A. and Fisher, J. W. (2004). “Full-scale fatigue tests of steel orthotropic deck panel for the Bronx-Whitestone Bridge rehabilitation.” Journal of Bridge Structures, 1(1), pp. 55–66.
Wolchuk, R. (1999). “Steel orthotropic decks: developments in the 1990s.” Journal of the Transportation Research Board, 1688, pp. 30–37.
Author information
Authors and Affiliations
Corresponding author
Additional information
Note.-Discussion open until November 1, 2011. This manuscript for this paper was submitted for review and possible publication on February 24, 2011; approved on May 26, 2011.
Rights and permissions
About this article
Cite this article
Oh, CK., Hong, KJ., Bae, D. et al. Analytical and experimental studies on optimal details of orthotropic steel decks for long span bridges. Int J Steel Struct 11, 227–234 (2011). https://doi.org/10.1007/s13296-011-2010-6
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13296-011-2010-6