Abstract
A meso- and microporous hypercrosslinked polyxylene was synthesized via Friedel-craft reaction in the presences of iron(III) chloride as a Lewis acid catalyst. Dichloro-p-xylene, which has both benzene ring and chlorine functional groups, was used as monomer for the one-step synthetic process. A different amount of catalyst was used for polymerization and hypercrosslinking reaction. Yield and properties of the hypercrosslinked polyxylene were affected by the concentration of catalyst. Maximum yield of hypercrosslinked polyxylene was 65.4% above 30 wt%/monomer. Maximum Brunauer-Emmett-Teller (BET) surface area was 1168.37 m2/g at 40 wt%/monomer. Micropore volume and peak diameter at maximum differential volume, determined using Horvath-Kawazoe (H-K) method, were 0.2324 cm3/g and 0.55 nm, respectively.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
C. Banglin, X. Shengchang, and Q. Guodong, Acc. Chem. Res., 43, 1115 (2010).
C. Tai-Shung, J. L. Ying, L. Yi, and K. Santi, Prog. Polym. Sci., 32, 483 (2007).
H. Shinpei, H. Satoshi, M. Ryotaro, F. Shuhei, M. Katsunori, K. Yoshinori, and K. Susumu, J. Am. Chem. Soc., 129, 2607 (2007).
H. Zhang, G. C. Hardy, Y. Z. Khimyak, M. J. Rosseinsky, and A. I. Cooper, Chem. Mater., 16, 4245 (2004).
L. Hu, M. Pasta, F. L. Mantia, L. Cui, S. Jeong, H. D. Deshazer, J. W. Choi, S. M. Han, and Y. Cui, Nano Lett., 10, 708 (2010).
F. Zhuangjun, L. Yang, Y. Jun, N. Guoqing, W. Qian, W. Tong, Z. Linjie, and W. Fei, Adv. Energy Mater., 2, 419 (2012).
S. Kristin, U. Baldur, B. Alfons, and S. Franziska, Micropor. Mesoepor. Mater., 154, 119 (2012).
C. Denise, B. Y. Mouna, H. Shaun, R. M. Stuart, C. Hubert, E. Erik, M. Guillaume, H. Patricia, and S. Chrisrian, Chem. Mater., 25, 2767 (2013).
L. Yali, L. Buyi, W. Wei, W. Kangbing, and T. bien, Adv. Mater., 24, 5703 (2012).
J. H. Ahn, J. E. Jang, C. G. Oh, S. K. Ihm, J. Cortez, and D. C. Sherrington, Macromolecules, 39, 627 (2006).
J. Y. Lee, C. D. Wood, D. Bradshaw, M. J. Rosseinsky, and A. I. Cooper, Chem. Commun., 25, 2670 (2006).
V. A. Davankov and M. P. Tsyurupa, Reactive Polymers, 13, 27 (1990).
G. I. Rosenberg, A. S. Shabaeva, V. S. Moryakov, T. G. Musin, M. P. Tsyurupa, and V. A. Davankov, Reactive Polymers, 1, 175 (1983).
W. Lei, W. Xi-Lin, X. Wei-Hong, H. Xing-jiu, L. Jin-Huai, and X. An-Wu, Appl. Mater. Interfaces, 4, 2686 (2012).
L. David, S. Shanker, D. Manuela, C. Andrea, P. Linda, A. Dino, V. Pradeep, T. Francesco, and C. Roberta, Int. J. Pharm., 443, 262 (2013).
L. Yongqin, L. Zhixing, and S. Frantisek, Anal. Chem., 84, 8457 (2012).
N. A. Penner, and P. N. Nesterenko, Anal. Commun., 36, 199 (1999).
S, N, Sidorov, L, M, Bronstein, V. A. Davankov, M. P. Tsyurupa, S. P. Solodovnikov, P. M. Valetsky, E. A. Wilder, and R. J. Spontak, Chem. Mater., 11, 3210 (1999).
V. A. Davankov and M. P. Tsyurupa, Pure Appl. Chem., 61, 1881 (1989).
A. Warshawsky, A. Deshe, and R. Gutman, Br. Polym. J., 16, 234 (1984).
M. P. Tsyurupa and V. A. Davankov, React. Funct. Polym., 53, 193 (2002).
K. J. Shea and D. A, Loy, Chem. Mater., 1, 572 (1989).
D. A. Loy and K. J. Shea, Chem. Rev., 95, 1431 (1995).
C. F. Martin, E. Stöckel, R. Clowes, D. J. Adams, A. I. Cooper, J. J. Pis, F. Rubiera, and C. Pevida, J. Mater. Chem., 21, 5475 (2011).
N. Fontanals, R. M. Marcè, P. A. G. Cormack., D. C. Sherrington, and F. Borrull, J. Chromatogr. A, 1191, 118 (2008).
F. Rouquerol, J. Rouquerol, and K. Sing, Adsorption by Powders and Porous Solids, Academic press, London, 1999.
J. H. Ahn, J. E. Jang, C. G. Oh, S. K. Ihm, J. Cortez, and D. C. Sherrington, Macromolecules, 39, 627 (2006).
Author information
Authors and Affiliations
Corresponding authors
Rights and permissions
About this article
Cite this article
Lee, S.M., Choi, W.J., Hwang, K. et al. Effect of catalyst concentration and reaction time on one-step synthesized hypercrosslinked polyxylene. Macromol. Res. 22, 481–486 (2014). https://doi.org/10.1007/s13233-014-2065-2
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13233-014-2065-2