Abstract
Blends of poly(lactic acid) (PLA) and poly(ethylene terephthalate glycol) (PETG) of various compositions were prepared by melt compounding and their compatibilities, physical properties, and isothermal crystallization behaviors were investigated. The calculated solubility parameters of PETG are similar to those of PLA. The interaction parameter between PLA and PETG was derived from the Flory-Huggins theory and predicted that PLA and PETG are miscible when PETG contents are below 22 wt%. In accordance with this result, the tan δ peak and glass transition temperatures of blends determined from dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC) showed a single peak at PETG contents lower than 22 wt%. Tensile test results showed that the elongation at the break of blends increased with an increase in PETG content. DSC and isothermal crystallization results showed that PETG accelerates the crystallization rate of PLA at PETG contents lower than 22 wt%, indicating that PETG acts as a nucleation agent in the crystallization of PLA. Wide angle X-ray diffraction results (WAXD) showed that the crystalline structure of PLA is not affected by the incorporation of PETG.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
R. E. Drumright, P. R. Gruber, and D. E. Henton, Adv. Mater., 12, 1841 (2000).
R. Auras, B. Harte, and S. Selke, Macromol. Biosci., 4, 835 (2004).
F. Carrasco, P. Pagés, J. Gámez-Pérez, O. O. Santana, and M. L. Maspoch, Polym. Degrad. Stab., 95, 116 (2010).
S. Yan, J. Yin, Y. Yang, Z. Dai, J. Ma, and X. Chen, Polymer, 48, 1688 (2007).
S. S. Ray, P. Maiti, M. Okamoto, K. Yamada, and K. Ueda, Macromolecules, 35, 3104 (2002).
Y. S. Yun, H. I. Kwon, H. Bak, E. J. Lee, J. S. Yoon, and H. J. Jin, Macromol. Res., 18, 828 (2010).
H. Pan and Z. Qiu, Macromolecules, 43, 1499 (2010).
M. Hiljanen-Vainio, P. A. Orava, and J. V. Seppala, J. Biomed. Mater. Res., 34, 39 (1997).
J. Kylmä and J. V. Seppälä, Macromolecules, 30, 2876 (1997).
N. Kawasaki, A. Nakayama, Y. Maeda, K. Hayashi, N. Yamamoto, and S. Aiba, Macromol. Chem. Phys., 199, 2445 (1998).
W. Li, J. Zeng, Y. Li, X. Wang, and Y. Wang, J. Polym. Sci. Part A: Polym. Chem., 47, 5898 (2009).
H. Tsuji and G. Horikawa, Polym. Int., 56, 258 (2007).
M. Sheth, R. A Kumar, V. Davé, R. A. Gross, and S. P. McCarthy, J. Appl. Polym. Sci., 66, 1495 (1997).
Z. Kulinski, E. Piorkowska, K. Gadzinowska, and M. Stasiak, Biomacromolecules, 7, 2128 (2006).
L. Jiang, M. P. Wolcott, and J. Zhang, Biomacromolecules, 7, 199 (2006).
S. B. Park, S. Y. Hwang, C. H. Moon, S. S. Im, and E. S. Yoo, Macromol. Res., 18, 463 (2010).
K. J. Saunders, Organic Polymer Chemistry: An Introduction to the Organic Chemistry of Adhesives, Chapman and Hall, London, 1988.
A. Ranade, N. D’souza, C. Thellen, and J. A. Ratto, Polym. Int., 54, 875 (2005).
P. J. Flory, Principles of Polymer Chemistry, Cornell Univ. Press, Ithaca, New York, 1953.
L. M. Robeson, Polymer Blends: A Comprehensive Review, Hanser Gardner Publications, Cincinnati, 2007.
J. H. Hildebrand and R. L. Scott, The Solubility of Nonelectrolytes, 3rd ed., Reinhold, New York, 1950.
J. D. Hoffman and J. J. Weeks, J. Res. Natl. Bur. Stand A, 66, 13 (1962).
H. Tsuji and Y. Ikada, Polymer, 36, 2709 (1995).
J. D. Hoffman, R. L. Miller, H. Marand, and D. B. Roitman, Macromolecules, 25, 2221 (1992).
T. Nishi and T. T. Wang, Macromolecules, 8, 909 (1975).
M. Kattan, E. Dargent, J. Ledru, and J. Grenet, J. Appl. Polym. Sci., 81, 3405 (2001).
E. W. Fisher, H. J. Sterzel, and G. Wegner, Polymer, 251, 980 (1973).
M. Avrami, J. Chem. Phys., 9, 177 (1941).
M. Avrami, J. Chem. Phys., 7, 1193 (1939).
J. F. Mano, Y. Wang, J. C. Viana, Z. Denchev, and M. J. Oliveira, Macromol. Mater. Eng., 289, 910 (2004).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Park, J.Y., Hwang, S.Y., Yoon, W.J. et al. Compatibility and physical properties of poly(lactic acid)/poly(ethylene terephthalate glycol) blends. Macromol. Res. 20, 1300–1306 (2012). https://doi.org/10.1007/s13233-012-0203-2
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13233-012-0203-2