Abstract
In this study, groundwater quality of an alluvial aquifer in the western Ganges basin is assessed using a GIS-based groundwater quality index (GQI) concept that uses groundwater quality data from field survey and laboratory analysis. Groundwater samples were collected from 42 wells during pre-monsoon and post-monsoon periods of 2012 and analysed for pH, EC, TDS, Anions (Cl, SO4, NO3), and Cations (Ca, Mg, Na). To generate the index, several parameters were selected based on WHO recommendations. The spatially variable grids of each parameter were modified by normalizing with the WHO standards and finally integrated into a GQI grid. The mean GQI values for both the season suggest good groundwater quality. However, spatial variations exist and are represented by GQI map of both seasons. This spatial variability was compared with the existing land-use, prepared using high-resolution satellite imagery available in Google earth. The GQI grids were compared to the land-use map using an innovative GIS-based method. Results indicate that the spatial variability of groundwater quality in the region is not fully controlled by the land-use pattern. This probably reflects the diffuse nature of land-use classes, especially settlements and plantations.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Introduction
Groundwater resources are dynamic in nature and are influenced by transitions in irrigation, industrialization, and urbanisation. Hence, monitoring and conserving this important resource is essential (Selvam et al. 2013). Groundwater quality in an area is largely determined by the natural processes such as lithology, groundwater velocity, and quality of recharge waters, rock–water interaction, and interaction with other types of aquifers (Helena et al. 2000; Khan et al. 2015). Water quality if not adequately managed can serve as a serious limiting factor to the future economic development and to the public health and environment which will result in enormous long-term costs to society (Pius et al. 2012). Water quality assessment involves evaluation of the physical, chemical, and biological nature of water in relation to natural quality, human effects, and intended uses (UNESCO/WHO/UNEP 1996). Such hydrochemical analysis helps in identifying potential zones of contamination and suitability of groundwater for drinking, irrigation, and other purposes.
The use of GIS technology has greatly simplified the assessment of natural resources and environmental concerns, including groundwater (Khan et al. 2011). GIS can be a very strong tool for generating solutions for water quality assessment, problems of water resources, and determination of water availability and management of water resources on a local or regional scale (Ketata et al. 2011; Shabbir and Ahmad 2015). Coupled with GIS, the groundwater quality assessment helps in demarcating the areas affected by groundwater pollution. GIS can be used to obtain reliable information about the existing groundwater quality scenario that may be essential for the groundwater planning and management strategies (Adhikary et al. 2012).
Water quality index (WQI) can be defined as a parameter which reflects the overall water quality at a particular location, i.e., cumulative effect of different water quality parameters (Singh et al. 2011). GIS-based groundwater quality index assessment has been carried out by many researchers, e.g., Noori et al. (2014), Tiwari et al. (2014), Selvam et al. (2013), Magesh and Chandrasekar (2013), Ishaku et al. (2012), Magesh et al. (2012), Yue et al. (2010), Reza and Singh (2010), etc. Babiker and Mohamed (2014) carried out GIS-based groundwater quality index assessment in Omdurman area of Central Sudan. Kumar et al. (2014) evaluated the groundwater quality using water quality index and fuzzy logic in the urban coastal aquifer of south Chennai. Singh et al. (2011) studied the effect of land-use change on groundwater quality using remote sensing and GIS-based approach in lower Shiwaliks of Punjab. Ketata et al. (2011) used GIS and WQI to assess groundwater quality in El Khairat deep aquifer, Central east Tunisia and revealed that the groundwater from south east of the aquifer is unsuitable for drinking purpose. Ramakrishnaia et al. (2009) used water quality index to assess the groundwater quality of Tumkur taluk, Karnataka, and the analysis reveals that the groundwater of the area needs some degree of treatment before consumption.
This study aims at evaluating the significance and applicability of a GQI generated using GIS approach for the assessment of groundwater quality in parts of an alluvial aquifer in Ganges Plains. The study also aims to analyse the influence of land-use activities in the study area on the underlying groundwater quality. The study is particularly innovative considering the methodology used to extract the water quality status for each land-use class using GIS routines.
Study area
The study area (Fig. 1) lies in the western Ganges plains. It is a part of the Kali watershed in Aligarh and Bulandshahr district, with a spatial coverage of 665 km2 extending from 28° N to 28°15′ N and 77° E to 77°15′ E. This falls in the Survey of India toposheet no 53 L/4 on a scale of 1:50,000. The area experiences tropical monsoon type of climate with hot summers and mild winters, and a distinct rainy season known as the monsoon season. The monsoon rains are received from July to September. Average annual rainfall in the area is 856 mm. The topography is relatively flat with elevation ranging from 176 m to 208 m above mean sea level. The general slope direction is from NW to SE. River Kali, a small tributary of River Ganges, flows through the area from NW to SE. River Kali is a perennial river fed by baseflow all along its length within the study area and beyond. Another small stream Choiyya Nadi, which is a tributary of the River Kali, flows along the NE corner of the study area from NW towards SE direction. This is a seasonal river that flows during the monsoons. The area is also traversed by the Upper Ganga Canal flowing towards the south east. Upper Ganga Canal branches into several distributaries like Palra, Pahasu, Kol, etc., and forms a fairly dense network of canals in the study area. The region is dominantly agricultural with some industrial activity.
Geology and hydrogeology
Quaternary sediments comprising of various grades of sand, calcareous concretions, and clay overlie the area. The alluvial sediments of the area overlie the Vindhyan rocks in an unconformable way. The thickness of the alluvial deposit varies from 287 to 380 metres in Aligarh district (Kumar and Bhargawa 2002) and from 400 to 600 m in Bulandshahr district (Bhartariya 2009). The surface alluvium in the area consists of clay, silt, and fine sand. There is alternation of granular or sandy zone and clay beds associated with calcareous concretions known as ‘Kankar’. The extensive granular zones which comprise medium-to-fine grey sand occasionally mixed with coarse sand and gravel is sub-divided into two or three sub groups by intervening clay beds. Figure 2 shows hydrogeological section of the aquifer along four section lines. The sandy horizons form the aquifer in the area. Groundwater occurs under unconfined conditions and depth to water varies between 2.23 and 12.4 m bgl. The hydraulic conductivity of the area varies from 8.13 to 51.25 m/day. Figure 3 shows the elevation of water table and the general groundwater flow direction which is from North–West to South–East.
Methodology
Groundwater sampling and GIS database
The study area, a segment of Kali watershed is, contained in the Survey of India Toposheet number 53L/4 at a scale of 1:50,000. The toposheet was used as a base for preparing the spatial GIS database for the study area. Open source GIS package SAGA 4.1.0 was employed for all the GIS tasks. The toposheet was scanned and georeferenced. Onscreen digitization was undertaken for the generation of spatial database. Attribute data collected from the field work were linked to the topological data generated by digitization. Water samples were collected from 42 groundwater bore-wells (Fig. 1) uniformly spread in the study area. Sampling was conducted during pre- and post-monsoon season of 2012. The geographical coordinates of the wells were captured using a handheld Garmin GPS receiver. Ground surface elevation at well location was obtained from SRTM 30 m DEM, since elevation information in the toposheet was limited due to the relative flatness of the terrain. Depth to water table was recorded at each well using Water Level Indicator. Well locations were downloaded from GPS and converted to a point shapefile in SAGA GIS. The hydrochemical data obtained from laboratory analysis of the water samples were linked to the spatial database of the well locations. These shape files were overlaid on the land-use map to assess the position of the sampling locations with respect to potential sources of groundwater contamination. Later, these point shapefiles were used for the preparation of concentration maps using Kriging Interpolation. Concentration maps are representations of the spatial variability of a particular water quality parameter and are prepared by spatial interpolation of the originally scattered concentration measurements (point data).
Groundwater quality analysis
Groundwater samples were collected from 42 bore-wells in the study area (Fig. 1) during May and November 2012 for physico-chemical analysis. The sampling wells were carefully selected to spread the sampling points over the study area evenly. The sampling location of each bore-well was recorded using a handheld Garmin GPS receiver. Prior to sample collection, the wells were pumped for about 3–5 min to remove the stagnant water in the wells. Polyethylene bottles of 1 litre capacity were used to store sampled water. All sample bottles were stored in ice-packed coolers immediately after collection. The temperature of all stored samples was maintained at 0–4 °C until immediately before analysis. The samples were analysed as per the standard methods of APHA (1992) in the geochemical laboratory of the Department of Geology, Aligarh Muslim University. EC, pH, and TDS were measured by a portable digital water analysis kit. Ca2+ was analysed by EDTA titrimetric method. Mg2+ was determined by the difference of hardness and calcium. Cl− was determined by titration. SO4 – values were determined by gravimetric method, Na and K by flame emission photometry, and NO3 − by colorimetric method.
Groundwater quality index generation
GQI proposed by Babiker et al. (2007) was used for water quality assessment. To generate the index, seven parameters listed in World Health Organization guidelines (WHO 2004) for drinking water quality were selected from the main data set. These are Cl−, Na+, Ca2+, Mg2+, SO4 2−, and TDS and NO3 −. After selecting the parameters, the concentration of each parameter in all the wells was interpolated using the Ordinary Kriging module in SAGA. Thus, seven concentration maps, one for each parameter, were obtained. The concentration maps were standardised (transforming the parameters to a common scale) for easy integration in GIS. For standardisation, each grid cell value in the primary concentration map was transformed using a normalized difference index:
where X′ is the observed concentration and X is the WHO maximum desirable concentration
The contamination index values in the resultant normalized difference map range between −1 and 1. The normalized difference map was further transformed into a rank map (sub-index), to remove the negative values, using the following polynomial function:
where C stands for the contamination index value for each grid cell in the normalized difference map and r stands for the corresponding rank value. The rank map rates the contamination index values from 1 to 10. Rank 1 indicates minimum impact on groundwater quality, while the rank 10 indicates maximum impact. Assignment of weights to the rank maps of each parameter was achieved by the spatial average rank value of each parameter’s rank map. The weights assigned to each parameter indicate its relative importance to groundwater quality. Parameters with high mean rate inflict higher impact over groundwater quality and are assumed to be more important in evaluating the overall groundwater quality (Babiker et al. 2007). For the six parameters categorized as chemically derived contaminants (Cl−, Na+, Ca2+, Mg2+, SO4 2−, and TDS), the average rank value was used as weight, while for NO3 −, a value two (2) was added to the mean rank value due to potential health risk posed by NO3 −:
where w is weight and r is rank value.
Finally, the seven sub-indices (rank maps) were aggregated to yield an index map using the “grid calculus” module in SAGA GIS. Here, a weighted sum index has been used. This GQI represents a weighted averaged linear combination of factors as shown below:
where ‘r’ stands for the rate of the rank map (1–10), ‘w’ stands for the relative weight of the parameter, and ‘N’ is the total number of parameters used in the suitability analyses.
Dividing by the total number of parameters involved in the computation of the GQI averages the data and limits the index values between 1 and 100. In this way, the impact of individual parameters is greatly reduced and the index computation is never limited to a certain number of chemical parameters. The “100” in the first part of the formula directly projected the GQI value, such that high index values close to 100 reflect high water quality and index values far below100 (close to 1) indicate low water quality.
Land-use mapping The very high-resolution satellite imagery available in Google earth offers a unique and readily accessible source for the preparation of land-use and land cover maps of a region. Land-use map for the study area was prepared using Google earth imagery of year 2012. Google earth also offers tools for digitisation of points, lines, and polygons. Polygons were generated for plantations, wasteland, ponds, and settlements; lines were digitised for rivers, canals, railway lines, and roads. Brick kilns were represented as points. The polygons, lines, and points were separately saved as.kml files which were imported into SAGA GIS. The different polygons were intersected with the outline vector file of the study area and the area excluding the digitised polygons was assigned as cropland. Final land-use map was employed for the impact assessment of land-use on groundwater quality.
Results and discussion
The groundwater quality data for the seven selected parameters for the 42 bore-wells are given in Table 1. Table 2 represents the basic statistics for the seven groundwater quality parameters selected for the preparation of GQI maps. It is observed that the mean values of all the parameters for both the seasons do not exceed the WHO threshold values. However, the maximum concentration of TDS, Na+, SO4, and NO3 exceeds the WHO threshold concentration in few wells during pre-monsoon as well as post-monsoon season.
Figures 4 and 5 show the groundwater quality index maps for pre-monsoon and post-monsoon season 2012, respectively. Dark green shade represents high GQI and good groundwater quality. The GQI values in pre-monsoon season range from 86.66 to 93.69, while the spatial mean is 91.24. The pre-monsoon 2012 GQI map shows low values in the north and north-eastern part corresponding to relatively poor groundwater quality. The southern part shows high GQI and thus relatively good quality. Post-monsoon GQI values range from 88.18 to 93.45, while the spatial mean is 90.85. The post-monsoon GQI map shows a band of low GQI (relatively poor groundwater quality) extending along the upper segment of Kali river.
While the spatial means of GQI for both the seasons reveals relatively good groundwater quality (higher values of GQI), the spatial variability in the GQI values may be linked to land-use activities. The spatial mean of GQI is very effective for comparing the overall groundwater quality scenario between the pre-monsoon and the post-monsoon seasons. In this case, we find a slight decrease in the mean GQI value from pre-monsoon to post-monsoon, indicating that the overall groundwater quality has slightly decreased from pre-monsoon to the post-monsoon season. This may be due to the flushing of contaminants accumulated in the vadose zone down into the groundwater zone by the strongly seasonal recharge during the monsoons.
Land-use map of the study area is shown in Fig. 6. The major land-use categories outlined here are those that are potentially capable of contaminating the groundwater. Dominant part of the study area is covered by cropland followed by plantations, wastelands, and human settlements. Groundwater quality assessment is usually made at specific locations (wells), however, it is influenced by the land use in the immediate vicinity as well as the potential ‘catchment’ of the well in the upflow direction, in regions with little topographic variations. Deciphering the areal extent of land that is influencing the groundwater quality in a particular well is quite difficult, owing to the dynamic nature of the cones of depressions of each well, and well interference. Thus, comparing ground water quality with overlying land use is not a straightforward exercise. One approach is to measure the acreage of nearby land-use categories and correlate it with the overall groundwater quality in a well. Alternatively, the groundwater quality can be processed into a groundwater quality index, as used in the present study, and the GQI, which is a continuously varying field, as opposed to the point observations of groundwater quality, can be correlated with the land use using GIS overlay tools.
In the present work, the latter technique has been employed to decipher the influence of land-use on groundwater quality. The polygon of each land-use category was overlaid on the GQI map of the pre-monsoon as well as post-monsoon periods. The mean as well as the standard deviation of all the GQI grid cells within each polygonal land-use category were calculated using overlay tools in SAGA GIS. The statistical results are shown in Table 3.
Land use has its bearing on groundwater quality; however, the intensity of impact depends on the type of land-use class. As for example, in largely agricultural areas, generally, the impact on groundwater quality is not highly variable due to similar land-use practice in the entire area. Built up land shows wide variation in groundwater quality depending upon the contaminant loading at various places.
From the statistics (Table 3), it is evident that the mean GQI value is almost similar in all land-use categories during the pre- as well as post-monsoon periods. This suggests that the groundwater in the region is having minimal influence from land-use conditions, probably because the agricultural and plantation lands are profusely spread over the entire region. However, it can be seen that the standard deviation is slightly higher for settlements during both the seasons. A high standard deviation points towards a greater spatial variation of groundwater quality within the settlements, which is not a desirable parameter for sustainability of groundwater use. Sustainability of groundwater use is based on low overall contamination and low variability in contamination. Hence, a greater variability in contamination within a particular land-use category either temporally or spatially will lower the sustainability of groundwater use.
Conclusion
The assessment of actual groundwater quality using the GQI maps is an interesting exercise at regional scales to provide overall contamination scenario. The study outlines a unique approach to assign water quality status to each land-use class by extracting the mean GQI value for each land-use class. This helps to link land-use, which is a spatially varying parameter, and groundwater quality, which is observed at specific points. The comparison of water quality (in the form of GQI map) and the land use was done using GIS tools, and links between the observed land-use and the underlying water quality were highlighted, on a regional scale. Groundwater quality index for both the seasons suggests good groundwater quality. The GQI values in pre-monsoon season range from 86.66 to 93.69. The pre-monsoon 2012 GQI map shows low values in the north and north-eastern part corresponding to poor groundwater quality. The southern part shows high GQI and thus relatively good quality. Post-monsoon GQI values range from 88.18 to 93.45. The post-monsoon map also shows more or less the same trend as observed in pre-monsoon, with low GQI values in the north and eastern part and high values in the south and south west.
Impact assessment of land use on groundwater quality of the study area revealed that the mean GQI value is almost similar in all land-use categories during the pre- as well as post-monsoon periods. The groundwater in the region is having minimal influence from land-use conditions, probably because the agricultural and plantation lands are profusely spread over the entire region. Settlements, however, show a greater temporal variability of groundwater quality.
Since groundwater quality is an evolving and ever-changing parameter, and hence, its monitoring and assessment should continue in the study area. This can provide a temporal database on water quality evolution in the region that can be compared to the land-use transformations over time, providing better insight into groundwater quality and land-use relationships.
References
Adhikary PP, Dash CJ, Chandrasekharan H, Rajput TBS, Dubey SK (2012) Evaluation of groundwater quality for irrigation and drinking using GIS and geostatistics in a peri-urban area of Delhi, India. Arabian J Geosci 5:1423–1434
APHA (1992) Standard methods for the examination of water and waste waters, 18th edn. American Public Health Association, Washington, DC
Babiker IS, Mohamed MAA (2014) Groundwater quality assessment using GIS, the case of Omdurman area, central Sudan. Sudan J Sci 6(1):23–33
Babiker IS, Mohamed MAA, Hiyama T (2007) Assessing groundwater quality using GIS. Water Resour Manag 21:699–715
Bhartariya SG (2009) District groundwater brochure. Report by Central Ground Water Board, Lucknow, p 13
Helena B, Pardo R, Vega M, Barrado E, Fernandez JM, Fernandez L (2000) Temporal evolution of groundwater composition in an alluvial (Pisuerga river, Spain) by principal component analysis. Water Res 34:807–816
Ishaku JM, Ahmed AS, Abubakar MA (2012) Assessment of groundwater quality using water quality index and GIS in Jada, northeastern Nigeria. Int Res J Geol Min (IRJGM) (2276–6618) 2(3):54–61
Ketata M, Gueddari M, Bouhlila R (2011) Use of geographical information system and water quality index to assess groundwater quality in El Khairat deep aquifer (Enfidha, Central East Tunisia). Arabian J Geosci 5(6):1379–1390
Khan HH, Khan A, Ahmed S, Perrin J (2011) GIS-based impact assessment of land-use changes on groundwater quality: study from a rapidly urbanizing region of South India. Environ Earth Sci 63:1289–1302
Khan A, Umar R, Khan HH (2015) Hydrochemical characterization of groundwater in Lower Kali Watershed, Western Uttar Pradesh, India. J Geol Soc India 86:195–210
Kumar A, Bhargawa AK (2002) Central groundwater report on groundwater resource and development potentials of Aligarh. Ministry of Water Resources, Uttar Pradesh, p 62
Kumar SK, Bharani R, Magesh NS, Godson PS, Chandrasekar N (2014) Hydrogeochemistry and groundwater quality appraisal of part of south Chennai coastal aquifers, Tamil Nadu, India, using WQI and fuzzy logic method. Appl Water Sci. doi:10.1007/s13201-013-0148-4
Magesh NS, Chandrasekar N (2013) Evaluation of spatial variations in groundwater quality by WQI and GIS technique: a case study of Virudunagar District, Tamil Nadu, India. Arabian J Geosci. doi: 10.1007/s12517-011-0496-z
Magesh NS, Krishnakumar S, Chandrasekar N, Soundranayagam JP (2012) Groundwater quality assessment using WQI and GIS techniques, Dindigul district, Tamil Nadu, India. Arabian J Geosci. doi:10.1007/s12517-012-0673-8
Noori-Sadat SM, Ebrahimi K, Liaghat AM (2014) Groundwater quality assessment using the water quality index and GIS in Saveh-Nobaran aquifer, Iran. Environ Earth Science. doi:10.1007/s12665-013-27708
Pius A, Jerome C, Sharma N (2012) Evaluation of groundwater quality in and around Peenya industrial area of Bangalore, South India using GIS techniques. Environ Monit Assess 184:4067–4077
Ramakrishnaiah CR, Sadashivaiah C, Ranganna G (2009) Assessment of water quality index for the groundwater in Tumkur Taluk, Karnataka State, India. E-J Chem 6:523–530
Reza R, Singh G (2010) Assessment of groundwater quality status by using water quality index method in Orissa, India. World Appl Sci J 9(12):1392–1397
Selvam S, Manimaran G, Sivasubramanian P, Balasubramanian N, Seshunarayana T (2013) GIS-based evaluation of water quality index of groundwater resources around Tuticorin coastal city, south India. Environ Earth Sci. doi:10.1007/s12665-013-2662-y
Shabbir R, Ahmad SS (2015) Use of geographic information system and water quality index to assess groundwater quality in Rawalpindi and Islamabad. Arab J Sci Eng 40:2033–2047
Singh CK, Shastri S, Mukherjee S, Kumari R, Avatar R, Singh A, Singh RP (2011) Application of GWQI to assess effect of land use change on groundwater quality in lower Shiwaliks of Punjab: remote sensing and GIS based approach. Water Resour Manag 25:1881–1898
Tiwari AK, Singh PK, Mahato MK (2014) GIS-based evaluation of water quality index of ground water resources in West Bokaro Coalfield, India. Curr World Environ. doi:10.12944/CWE.9.3.35
UNESCO/WHO/UNEP (1996) Water quality assessments—a guide to use of biota, sediments and water in environmental monitoring, 2nd edn. In: Chapman D (ed) Chapman & Hall Publishers. ISBN 0419215905(HB) 0419 216006(PB)
WHO (2004) Guidelines for drinking-water quality, vol 1, 3rd edn, recommendations. WHO, Geneva, pp 145–220
Yue LP, Hui Q, Hua WJ (2010) Groundwater quality assessment based on improved water quality index in Pengyang County, Ningxia, Northwest China. E-J Chem 7(S1):209–216
Acknowledgements
The financial assistance received by first author during the course of this research in the form of Junior Research Fellowship and Senior Research Fellowship from University Grant Commission, New Delhi is acknowledged.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Khan, A., Khan, H.H. & Umar, R. Impact of land-use on groundwater quality: GIS-based study from an alluvial aquifer in the western Ganges basin. Appl Water Sci 7, 4593–4603 (2017). https://doi.org/10.1007/s13201-017-0612-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13201-017-0612-7