Abstract
The potentially deleterious effects of methylene blue (MB) on human health drove the interest in its removal promptly. Bioremediation is an effective and eco friendly for removing MB. Soil bacteria were isolated and examined for their potential to remove MB. The most potent bacterial candidate was characterized and identified using 16S rRNA sequence technique. The evolutionary history of the isolate was conducted by maximum likelihood method. Some physiochemical parameters were optimized for maximum decolorization. Decolorization mechanism and microbial toxicity study of MB (100 mg/l) and by-products were investigated. Participation of heat killed bacteria in color adsorption have been investigated too. The bacterial isolate was identified as Stenotrophomonas maltophilia strain Kilany_MB 16S ribosomal RNA gene with 99% sequence similarity. The sequence was submitted to NCBI (Accession number = KU533726). Phylogeny depicted the phylogenetic relationships between 16S ribosomal RNA gene, partial sequence (1442 bp), of the isolated strain and other strains related to Stenotrophomonas maltophilia in the GenBank database. The optimal conditions were investigated to be pH 5 at 30 °C, after 24 h using 5 mg/l MB showing optimum decolorization percentage (61.3%). Microbial toxicity study demonstrated relative reduction in the toxicity of MB decolorized products on test bacteria. Mechanism of color removal was proved by both biosorption and biodegradation, where heat-killed and live cells showed 43 and 52% of decolorization, respectively, as a maximum value after 24-h incubation. It was demonstrated that the mechanism of color removal is by adsorption. Therefore, good performance of S maltophilia in MB color removal reinforces the exploitation of these bacteria in environmental clean-up and restoration of the ecosystem.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Introduction
Disposal of synthetic dyes improperly in wastewater depicts acute toxic effects on aquatic flora and fauna, causing severe environmental problems (Singh et al. 2014). Therefore, the increasing amount of dyes like methylene blue (MB) because of industrial activities indicates a probable hazard to the ecosystem. Alongside, the urgent need for water and decreasing supply made the treatment and recycle of industrial effluents are of great importance. Methylene blue is a thiazine (cationic) dye exploited in the coloring paper, hair, cotton and wools (Han et al. 2010). Notably, about 10–15% of the dyes are lost in the effluents of textile units, making them highly colored. Maas and Chaudhari (2005) reported that 280,000 tons of textile dyes are inflow in such industrial effluents every year worldwide (Maas and Chaudhari 2005). Once they released into receiving water bodies, they cause environmental problems where they affect water transparency and gas solubility blocking the permeation of oxygen and sunlight necessary for the survival of various aquatic forms (Crini 2006). Dye removal is of a particular concern because it is mostly unaffected by traditional treatment systems. Dyes; however, are more difficult to treat because their synthetic origin where they consist mainly of complex aromatic molecular structures, often synthesized to resist fading on exposure to soap, sweat, water, light or any oxidizing agents (Khan and Husain 2007). This renders them more stable and less amenable to degradation (Seshadri et al. 1994). Moreover, chemical and physical methods for removing dyes from waste water were not widely applied in the textile industries because of the high cost and disposal problems (Mazmanci and Unyayar 2005). Wastewaters have been known to be harmful to the microorganisms involved in wastewater treatment; thus, dye waste waters cause failure of the treatment plants (Altaher and El Qada 2011). Concentration of methylene blue used is within the limits found in polluted waters (50–1000 mg/dm3) (Sarioglu and Atay 2006). In recent years, the biological treatment took attraction in removing the undesired color and toxicity of dyes than other ordinary treatment processes. A considerable attention has been directed in evaluating the capability of microorganism in decolorization and degradation of dyes. The removal of MB by different microorganisms was investigated (Ong et al. 2005; Fulekar et al. 2013; Singh et al. 2014; Ranga et al. 2015). Therefore, microbial processes play a vital role in the safe clean-up of environmental messes (Abbas et al. 2014). However, the effluent because of biotransformation of dyestuffs could be toxic (Chung and Stevens 1993). For environmental safety, the microbial toxicity of the by-products produced during the decolorization process should be evaluated. Microorganisms have the ability to decolorize the dye solution through two ways: either adsorption on the microbial biomass or biodegradation of the dyes by the cellular enzymes. Therefore, the biological method is the focus of recent studies on dye degradation and decolorization. Therefore, the objective of this study was to evaluate the ability of soil-isolated bacteria in the Southern area of Saudi Arabia to remove MB.
Methods
Chemicals
All chemicals and reagents used for experiments were of analytical grade.
Decolorization experiment
About 0.1 ml of bacterial culture was inoculated in 250 ml Erlenmeyer flask containing 50 ml nutrient broth media and incubated at 30 °C for 24 h. MB was added at a concentration of 10 mg/l (0.5 mg/50 ml) and 3 ml of the culture media was withdrawn at different time intervals to be centrifuged at 5000 rpm/min for 20 min to separate the bacterial cell mass. Decolorization potential was ascertained by measuring the absorbance of culture supernatants at the maximum absorption wavelength of MB (665 nm). The percentage of decolorization (D%) was calculated by the following equation Eq. (1) (Parshetti et al. 2010):
where, A 0 denote the initial absorbance of sample and A t denotes the absorbance at different time intervals.
Isolation and characterization of soil bacteria
Bacterial strains were isolated from soil rhizosphere in Abha/Kingdom of Saudi Arabia by serial dilution method (Benson 2002). A sample of 5 g soil was suspended in 100 ml water. 1 ml of soil suspension was serially diluted in distilled water. A volume of 0.1 ml of soil suspension was spread onto nutrient agar plates and incubated at 30 °C for 24 h. The different colonies observed were selected and characterized.
Screening of bacterial isolates towards MB decolorization
The screening was carried out for different bacterial isolates individually towards MB decolorization according to Parshetti et al. (2010) as described above.
Molecular identification of the selected isolate
The selected candidate was identified by sequencing the 16S rRNA. Total genomic DNA was extracted from pure bacterial cultures using DNeasy Blood and Tissue Kit (Qiagen, West Sussex, UK). PCR amplification of the16S rRNA gene from bacterial isolate was conducted using the universal primers: 785F (5′-GGATTAGATACCCTGGTAGTC-3′) and 907RA: (5′-CCGTCAATTCCTTTGAGTTT-3′) (Morales and Holben 2009). Thermal cycling comprising the following steps: 95 °C for 3 min, followed by 30 cycles of 95 °C for 30 s, 56 °C for 30 s, 72 °C for 45 s, and a final step at 72 °C for 10 min. The PCR products submitted for sequencing. The amplified DNA fragments gel-purified using QIA quick™ Gel Extraction Kit (Qiagen, USA) following the instructions of the manufacturer and sequenced by Macrogen Inc (Seoul, Korea) using an ABI3730 XL Automatic DNA Sequencer (Applied Biosystems, Renton, USA). Multiple alignments of sequences and the evolutionary history were deduced with other sequences downloaded from the GenBank database using Mega 6 (Molecular evolutionary genetic analysis) software (Tamura et al. 2013). The maximum likelihood method was adopted to construct the phylogenetic tree.
Effect of physiochemical parameters on decolorization process
To evaluate the impact of environmental factors, various concentrations of MB (2.5, 5, 10, 15, 20 g/l) used to determine the effect of concentration on the decolorization process. The incubation period was evaluated by incubating the bacterial isolate for different times (0, 1, 2, 3, 4, 5 days). The effect of the temperature and pH was also investigated by incubating bacterial isolate at temperature range (4, 20, 28, 30, 37 and 40 °C) and various initial pH values (4, 5, 6, 7, 8, 9), respectively (Parshetti et al. 2010).
Microbial toxicity study
For assessment of the impact of MB (100 mg/l) and its degradation products, microbial toxicity tests performed by agar well diffusion technique using Gram-positive bacteria (Staphylococcus aureus) and Gram-negative bacteria (P. aeruginosa, Shigella sp, Klebsiella sp and Proteus sp). Test bacterial cultures were grown overnight in nutrient broth and standardized to OD600 nm = 0.1. Aliquots of bacterial cultures were then spread-plated onto nutrient agar plates. Wells of diameter 6 mm done in the agar plate where they loaded 100 µl of MB (100 mg/l) and by-products, separately. The plates were left for 2 h for diffusion before incubation at 30 °C for 24 h. The plates were observed for inhibition zones.
Mode of action of decolorization
The change in the peak of absorption spectrum reveals the mechanism of decolorization process. Variation of UV—visible spectra of MB- containing supernatant of bacterial culture was checked at 0, 24 and 48 h spectrophotometrically where the maximum wavelength at 665 nm (Shah et al. 2013).
Decolorization of MB by live and heat-killed cells
Heat-killed bacteria were prepared according to Zuany-Amorim et al. (2002). Bacterial culture was grown overnight in MB supplemented-nutrient broth, centrifuged at 6000 rpm for 5 min and then washed three times with KK2 buffer (6.5 mM KH2PO4, 3.8 mM K2HPO4, pH 6.2).The pellet is suspended in 1/10th of the initial volume of KK2 and an aliquot is diluted to measure the OD650. The volume of the bacterial suspension is then adjusted to a density of 1012 cells/ml (assuming that an OD650 of 0.1 corresponds to 108 cells/ml). Cells are heat-killed at 70 °C for 10 min and then added to 100 ml NB media containing 100 mg/l MB. Consequently, live bacterial cells inoculated to another 100 ml NB media containing 100 mg/l MB. Both flasks were incubated at 37 °C. Aliquot 3 ml of each flask withdrawn at zero time and every 12 h and checked spectrophotometrically at 665 nm.
Statistical analysis
The statistical analysis performed using the one-way ANOVA. A P value < 0.05 was statistically significant. The biochemical data are recorded and expressed as mean ± SD (Zar 2007).
Results
Isolation and screening of bacterial isolates
Total of 40 bacterial isolates were isolated from soil rhizosphere, of them three isolates showed the decolorization activity. Figure 1 depicts that there is no significant difference between them towards decolorization activity meanwhile the most potent isolate has the ability to remove 53% of MB was chosen in the present study.
Identification of the selected isolate
The results cleared that the bacterial isolate is identified as Stenotrophomonas maltophilia strain Kilany_MB 16S ribosomal RNA gene, exhibiting 99% sequence similarity. The sequence was submitted to NCBI (Accession number = KU533726). Figure 2 shows the phylogenetic relationship of 16S ribosomal RNA gene, partial sequence (1442 bp) of the isolated strain and other strains and species related to Stenotrophomonas maltophilia in the GenBank database.
Effect of incubation period
The results revealed that the rate of decolorization was very fast where it begins just after bacterial inoculation reaching the maximal value (51.7%) after 1st day of incubation and there was non-significant difference in decolorization with the increase of incubation period (Fig. 3).
Effect of MB concentration
The results showed that the percentage of decolorization significantly increased with the increase in MB concentration reaching the maximum value at 5 mg/l (61.3%); further increase in concentration exhibited no significant increase in percentage of decolorization (Fig. 4).
Effect of temperature
The decolorization activity significantly increased with the increase in temperature reaching the maximum value at 30 °C (60.3%) then began to decline (Fig. 5).
Effect of initial pH value
In acidic conditions, the percentage of decolorization increased significantly with the increase in pH from 4 to 5 showing the maximum value at pH 5 (59.6%) then began to drop (Fig. 6).
Microbial toxicity study
The results revealed that MB exhibited more inhibitory effect than the by-products against all tested bacterial strains (Table 1). Subsequently, the degradation products were less toxic than the MB to an exploited microorganism. As well as, Gram-positive bacteria were more sensitive to MB than Gram-negative bacteria.
Mode of action of MB decolorization
Figure 7 displays the decrease of UV–visible spectra over periods of time (0, 24, and 48 h). In addition a new peak was appeared at 550 nm that is might be corresponding to a new compound. Noteworthy, Fig. 8 illustrated that heat-killed bacterial cells and live bacterial cells showed 43 and 52% of decolorization as a maximum value after 24-h incubation, respectively.
Decolorization of MB by live and heat-killed cells
Heat-killed bacteria were prepared according to Noethe and Manstein (1998). Bacterial culture was grown overnight in MB doped-nutrient broth, centrifuged at 6000 rpm for 5 min and then washed three times with KK2 buffer (6.5 mM KH2PO4, 3.8 mM K2HPO4, pH 6.2). The last pellet is resuspended in 1/10th of the initial volume of KK2 and an aliquot is diluted to measure the OD650. The volume of the bacterial suspension is then adjusted to a density of 1012 cells/ml (assuming that an OD650 of 0.1 corresponds to 108 cells/ml). Cells are heat-killed at 70 °C for 10 min and then added to 100 ml NB media containing 100 mg/l MB. Consequently, live bacterial cells inoculated to another 100 ml NB media containing 100 mg/l MB. Both flasks were incubated at 37 °C. Aliquots of 3 ml of each flask withdrawn at zero time and every 12 h and checked at 665 nm.
Discussion
In recent years, a number of studies have focused on some microorganisms, which are able to biodegrade and biosorb dyes in wastewaters. A wide variety of microorganisms capable of decolorizing a wide range of dyes includes bacteria, fungi, and algae. The use of bacteria for the removal of synthetic dyes offers considerable advantages. Bioremediation is relatively inexpensive, simple and the by-products of complete mineralization are less or non-toxic. Considering this fact, the present study aimed to test decolorization of MB by bacteria isolated from soil. Bacteria showing maximum MB decolorization efficiency (53%) was selected and identified as Stenotrophomonas maltophilia. It is an aerobic, non-fermentative, Gram- negative bacterium and ubiquitous in aqueous environments, soil, and plants. It has also been used in biotechnology applications (Ryan et al. 2007) such as metabolizing the explosive RDX (hexahydro-1,3,5-trinitro-1,3,5-triazine) and degradation of acrylamide (Kitahara et al. 2012). In a recent study, Arshi et al. (2013) investigated that Aspergillus niger decolorized MB by 22.44% whereas T. lignorum can decolorized MB by 48.3%. In the current study, the rate of decolorization is very fast reaching the maximal value of MB decolorization (51.7%) after the 1 st day of incubation. This result is matching with what obtained by Ong et al. (2005) and Shah et al. 2013 who found that the color of MB begins to disappear within a few minutes after incubation due to reduction by bacterial biomass reaching 28% after 24-h incubation. On the other hand, P putida decolourized 69% of MB after 7 days of incubation (Fulekar et al. 2013). In this study, MB decolorization significantly increases with the increase in MB concentration reaching the maximum value at 5 mg/l (61.3%). This may be explained by the fact that the available binding sites on the surface of bacteria quickly reached saturation at a very high initial concentration of MB. This result is inconsistent with the findings reported by other researchers (Mohamed et al. 2012; Rao et al. 2013) who observed that the removing of methylene blue decreased by increasing the initial concentration of MB in aqueous solution. However, Ong et al. (2005) investigated that the increase of MB concentration had resulted in the increase of maximum dye removal rate. Notably, the temperature is an important factor for the activity of bacteria. Where the temperature required to the maximum rate of color removal tends to correspond with the optimum bacterial growth temperature of 30 °C (60.3%). This result is in concordant with Benetoli et al. (2011). While Liu et al. (2014) suggested that the maximum dye removal is achieved at 40 °C. At lower temperatures, the Brownian motion of bacteria is weak, which reduces the contact of bacteria with the MB, leading to less bio association. On the other hand, much higher temperatures also weaken the decolorization, which may be due to inactivation of intracellular enzymes assisting in the active transport of the bacteria, reducing the bacterial activity. Appropriately, raising the temperature could enhance the bacterial adsorption activity, thereby improving the decolorization efficiency (Benetoli et al. 2011). Bacterial culture generally exhibits maximum decolorization at pH 5 (59.6%) whereas the rate of color removal tends to decrease rapidly at highly acidic or alkaline pH. The results are in agreement with Rao et al. (2013) who reported that the percentage of MB decolorization significantly increased from pH 4 to 7 then it is began to decrease. This may explained by the fact that at low pH, protons in solution compete with the cationic dye for the binding sites on the surface of bacteria. At higher pH, hydroxyl groups in solution complex with cationic dye preventing their adsorption by microbial sorbents (Rao et al. 2013). In this study, the degradation products were less toxic compared to the MB to the exploited microorganism (S. aureus, P.aeruginosa, Shigella sp, Klebsiella sp and Proteus sp). These results are consistent with what reported by Kalyani et al. (2008) and Przystas et al. (2015) who observed that metabolites were non-toxic as compared to dye sample. In spite of the effectiveness of the biological treatments, in some cases microorganisms can transform dyes into compounds more toxic than the original compound (Karigar and Rao 2011). Consequently, there is an urgent need for assessing the toxicity of product after the biological treatments. For this purpose, a toxicological assay such as microbial toxicity used to determine the toxicity of degradation products (Kalyani et al. 2008). In this work, mechanism of decolorization was confirmed by both biosorption and biodegradation (Aravindhan et al. 2007; Kumar et al. 2007). In the former case, MB was adsorbed onto the surface of bacterial cells, this is judged by the examination of the absorption spectrum where most peaks decrease approximately with time in proportion to each other. Meanwhile, the other part of MB removal is attributed to biodegradation, because a new UV–Vis absorbance peak was appeared at 550 nm (Chen et al. 2003; Yu and Wen 2005). In the case of heat-killed bacterial cells, 43% of decolorization was recorded after 24-h incubation, which might be due to the adsorption on dead bacterial cells, and this was also confirmed by the presence of blue colored cell pellets. Biological adsorption is the result from electrostatic attraction between the bacteria and MB where bacteria are negatively charged due to the presence of (PO4) groups on their surfaces, while MB is positively charged. Therefore, the electrostatic attraction causes MB to adhere onto the bacterial surface. Additionally, Uv- Vis spectrum shows the migration and decline of the peaks of carboxyl groups, HOH and –NH2 during the decolorization process, indicating that these functional groups can react with MB (Liu et al. 2014). While in the case of live cells, 52% of decolorization was achieved after 24 h and the cell pellets were not pigmented. These findings provided an obvious evidence for biodegradation of MB by Stenotrophomonas maltophilia, rather than inactive surface adsorption. In this work, the decrease of UV–visible spectra of MB with time revealing adsorption of MB on Stenotrophomonas maltophilia. Biological adsorption is resulted from electrostatic attraction between the bacteria and MB where bacteria are negatively charged due to the presence of PO4- groups on their surfaces, while the MB is positively charged. Therefore, the electrostatic attraction causes MB to adhere onto the bacterial surface. Additionally, the UV- Vis spectrum shows the migration and decline of the peaks of carboxyl groups, HOH and –NH2 during the decolorization process, indicating that these functional groups can react with MB.
Conclusion
It is concluded that Stenotrophomonas maltophilia strain kilany_MB has the potential to MB decolorization at 30 °C at pH 5 using 5 mg/l after the 1st day of incubation by adsorption. MB is removed by two ways biodegradation and adsorption on bacterial surface. The most economical importance from the narrow decolorization potential difference between live and dead cells is that dead bacterial cells can be used to remove MB without environmental pollution as done by live cells. Hence, Stenotrophomonas maltophilia is one of the most promising strain that help in the low-cost and naturally renewable technology.
References
Abbas SZ, Rafatullah M, Ismail N, Lalung J (2014) Isolation and characterization of Cd-resistant bacteria from industrial wastewater. Desalination Water Treat 56(4):1037–1046
Altaher H, El Qada E (2011) Investigation of the treatment of colored water using efficient locally available adsorbent. Int J Energy and Environ 2(6):1113–1124
Aravindhan R, Rao JR, Nair BU (2007) Removal of basic yellow dye from aqueous solution by sorption on green alga Caulerpa scalpelliformis. J Hazard Mater 142:68–76
Arshi S, Jagvijay S, Sandeep B, Priyanku T, Vivek K (2013) Biodegradation of textile dyes by fungi isolated from north Indian Field Soil. Environ Asia 6:51–57
Benetoli LOB, Bruno MC, da Cícero SP, Ivan GS, Nito AD (2011) Effect of temperature on methylene blue decolorization in aqueous medium in electrical discharge plasma reactor. J Braz Chem Soc 22(9):1669–1678
Benson HJ (2002) Microbiological applications-laboratory manual in general microbiology, 8th edn. McGraw Hill International edition, New York
Chen KC, Wu JY, Liou DJ, Hwang SC (2003) Decolorization of the textile dyes by newly isolated bacterial strains. J Biotechnol 101:57–68
Chung KT, Stevens SEJ (1993) Degradation of azo dyes by environmental microorganisms and Helminths. Environ Toxic Chem 12:2121–2132
Crini G (2006) Non-conventional low-cost adsorbents for dye removal. Bioresource Technol 97:1061–1085
Fulekar MH, Wadgaonkar SL, Singh A (2013) Decolourization of dye compounds by selected bacterial strains isolated from dyestuff industrial area. Int J Adv Res Technol 2:182–192
Han R, Zhang L, Song C, Zhang M, Zhu H, Zhang L (2010) Characterization of modified wheat straw, kinetic and equilibrium study about copper ion and methylene blue adsorption in batch mode. Carbohydr Polym 79(4):1140–1149
Kalyani DC, Patil PS, Jadhav JP, Govindwar SP (2008) Biodegradation of reactive textile dye Red BLI by an isolated bacterium Pseudomonas sp. SUK1. Bioresour Technol 99(11):4635–4641
Karigar CS, Rao SS (2011) Role of microbial enzymes in the bioremediation of pollutants. Enzyme Res 2011(2011):1–11
Khan AA, Husain Q (2007) Decolorization and removal of textile and non-textile dyes from polluted wastewater and dyeing effluent by using potato (Solanum tuberosum) soluble and immobilized polyphenol oxidase. Bioresour Technol 98:1012–1019
Kitahara Y, Okuyama K, Ozawa K et al (2012) Thermal decomposition of acrylamide from polyacrylamide. J Therm Anal Calorim 110:423. doi:10.1007/s10973-012-2544-7
Kumar K, Devi SS, Krishnamurthi K, Dutta D, Chakrabarti T (2007) Decolorisation and detoxification of Direct Blue-15 by a bacterial consortium. Bioresour Technol 98:3168–3171
Liu J, Li Xiangling, Luo Jinghuan, Chao Duan HuHu, Qian Guangren (2014) Enhanced decolourisation of methylene blue by LDH-bacteria aggregates with bioregeneration. Chem Eng J 242:187–194
Maas R, Chaudhari S (2005) Adsorption and biological decolorization of azo dye reactive red 2 in semicontinuous anaerobic reactors. Process Biochem 40:699–705
Mazmanci MA, Unyayar A (2005) Decolourization of reactive black 5 by Funaliatrogii immobilized on Luffa cylindrical sponge. Process Biochem 40:337–342
Mohamed RM, Mkhalid IA, Baeissa ES, Al-Rayyani MA (2012) Photocatalytic degradation of methylene blue by Fe/ZnO/SiO2 nanoparticles under visible light. J Nanotechnol 2012:1–5
Morales SE, Holben WE (2009) Empirical testing of 16S rRNA Gene PCR primer pairs reveals variance in target specificity and efficacy not suggested by in silico analysis. Appl Environ Microbiol 75(9):2677–2683
Ong S, Toorisaka E, Hirata M, Hano T (2005) Biodegradation of redox dye methylene blue by up-flow anaerobic sludge blanket reactor. J Hazard Mater 24:88–94
Parshetti GK, Telke AA, Kalyani DC, Govindwar SP (2010) Decolorization and detoxification of sulfonatedazo dye methyl orange by Kocuria rosea MTCC 1532. J Hazard Mater 176(1–3):503–509
Przystas W, Zablocka-Godlewska E, Grabinska-Sota E (2015) Efficacy of fungal decolorization of a mixture of dyes belonging to different classes. Brazil J Microbiol 46(2):415–424
Ranga P, Saharan BS, Sharma D, Ankita (2015) Bacterial degradation and decolorization of textile dyes by newly isolated Lysobacter sp. Afric J Microbiol Res 9(14):979–987
Rao KSP, Rao MV, Bangaraiah P (2013) Removal of methylene blue from aquas solution using Grewiaor biculatarottl: equilibrium, Kinitic and Thermodynamic Studies. Int J Eng Res Sci Technol 2(4):2319–5991
Ryan MP, Pembroke JT, Adley CC (2007) Ralstonia pickettii in environmental biotechnology: potential and applications. J Appl Microbiol 103:754–764
Sarioglu M, Atay UA (2006) Removal of methylene blue by using biosolid. Global NEST J 8(2):113
Seshadri S, Bishop PL, Agha AM (1994) Anaerobic/aerobic treatment of selected azo dyes in wastewater. Waste Manage 15:127–137
Shah MP, Patel KA, Nair SS, Darji AM (2013) Isolation, identification and screening of dye decolorizing bacteria. Am J Microbiol Res 1(4):62–70
Singh RP, Singh PK, Singh RL (2014) Bacterial decolorization of textile azo dye acid orange by Staphylococcus hominis RMLRT03. Toxicol Int J 21(2):160–166
Tamura K, Stecher G, Peterson D, Filipski A, Kumar S (2013) MEGA6: molecular evolutionary genetics analysis version 6.0. Mol Biol Evol 30:2725–2729
Yu Z, Wen X (2005) Screening and identification of yeasts for decolorizing synthetic dyes in industrial wastewater. Int Biodeterior Biodegradation 56:109–114
Zar JH (2007) Biostatistical Analysis, 5th edn. Prentice-Hall, Upper Saddle River. ISBN 0131008463
Zuany-Amorim C et al (2002) Long-term protective and antigen-specific effect of heat-killed Mycobacterium vaccae in a murine model of allergic pulmonary inflammation. J Immunol 169(3):1492–1499
Acknowledgements
This work is supported by King Khalid University, Faculty of science, Biology Department. I thank Prof. Dr. Essam H. Ibrahim for excellent technical assistance and for critical review of this manuscript.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Funding sources
This research did not receive any specific grant from funding agencies in the public, commercial, or not-for-profit sectors.
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Kilany, M. Isolation, screening and molecular identification of novel bacterial strain removing methylene blue from water solutions. Appl Water Sci 7, 4091–4098 (2017). https://doi.org/10.1007/s13201-017-0565-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13201-017-0565-x