Abstract
The operating process, versatility and the increasing research interest in optimising the process and products technology in the electroless plating method of metal coating, particularly, the electroless nickel plating of metallic substrates such as mild steel, necessitates the writing of this review. It is also aimed at providing more literature information, both of the past and the present published research in this field. In this paper, electroless nickel plating is introduced. The various nickel plating solutions and baths’ operating parameters; main types of electroless nickel plating; the mechanism involved in the plating process; application of the nickel plating process to iron powders; advantages and disadvantages and the process’s other applications are reviewed. Electroless nickel plating produces an amorphous deposit in the as-plated condition. The deposit is not dependent on current distribution and hence it is almost uniform in thickness. Electroless nickel plating is far more difficult to remove chemically than conventional nickel deposits due to its superior corrosion resistance. The deposit has a good wettability and is generally hard. However, its bath control is more complex than with electroplating. The bath also has lower efficiency and higher operating costs, even without the use of electricity.
Article PDF
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Schlesinger M (2010) Modern electroplating, 5th edn. John Wiley & Sons Inc
Osifuye C O, Popoola A P I, Loto C A, Oloruntoba D T (2014) Int J Electrochem Sci 9:109
Loto C A (1989) Can Metall Q 28(3):259
Paul S. Electroless plating, Plating, Inc. http://www.corrosion-doctors.org/metalcoatings/Electroless.htm (Retrieved: 11-04-2015)
Wikipedia (2008) Electroless nickel plating. http:/en.wikipedia.org/wiki/Electroless_nickel_plating
Electro Coatings Electroless Nickel Plating. http://www.electro-coatings.com/electroless-nickel-plating.php
Palaniappa M, Seshadri S K (2008) Science direct, Wear 265:735
Sotskaya N V, Ryabinina E I, Kravchenko T A, Shikhaliev K S (2003) Prot Met 39(3):250
Shusheng Z, Han K, Cheng L (2007) Surf Coat Technol 202:2807
Osifuye C O (2014) Electrochemical corrosion resistance of electroless plated mild steel, M.Tech Dissertation, Department of Chemical, Metallurgical & Materials Engineering, Tshwane University of Technology, Pretoria, South Africa
Sahoo P, Kalyan S D (2011) Mater Des 32(4):1760
Li L, An M (2008). J Alloys Compd 461:85
Molla H R, Modarress H, Abdouss M (2012) J Coat Technol Res 9(2):183
Bulasara V K, Thakuria H, Uppaluri R, Purkait M K (2011) Desalination 268:195
Abdel-Salam H, Shoeib M A, Hady H, Abdel-Salam O F (2008) J Appl Electrochem 38:385
Hari K K, John S, Srinivasan K N, Praveen J, Kavimani M, Ganesan P M (2006) Metall Matls Trans A 37A:1917
Brenner A, Riddell G E (1947) Proc Am Electroplaters Soc 34:156
Agarwala R C, Agarwala V (2003) Sadhana 28:475–493
Tarozaite R (2005) CHEMIJA, T.H. I:8
Parker K (1992) Met Finish 79:29
Lo P H, Tsai W T, Lee J T, Hung M P (1994) Surf Coat Technol 67:27
Far J P G, Noahani A A (1996) Trans IMF 74:221
Balaraju J H, Seshadri S K (1999) Met Finish 97:8
Younan M M, Shoeib M (2002) Galvanotechnik 93:932
Keong K G, Sha W, Malinov S (2003) Surf Coat Technol 168:263
Loto C A (1987) J Metals 39(8):36
Chen C-H, Chen B-H (2006) Chem Mater 18(13):2959
Gabe D R (1978) Principles of Metal Surface-Treatment and Protection. Pergamon Press, p 73
Burns R M, Bradley W W (1967) Protective Coatings for Metals. Reinhold Publishing Corporation, New York, pp 229–230
Park S H, Lee D N (1988) J Matls Sci 23:1643
Minjer C H, Brenner A (1975) Plating 44:1297
Spencer LF (1974) Metal Fin 72:58
Loto C A (1982) A Sudy of Electroless Nickel Plating of Iron Powders. M.Sc. Dissertation, Brunel University, Uxbridge, Middx., London, UK
Canning W (1978) The Canning Handbook on electroplating, 20th Edn, pp 425–429
Hammond R A F (1972) Met Fin J 18:3
Fanner D A, Hammond R A F (1959) Trans Met Fin 36:32
Saubestre E B (1958) Plating 45:927
Roehl E J, Wesley W A (1950) Plating 37:142
Uhlig H H, Revie R W (1985) Corrosion and corrosion control: an introduction to corrosion science and engineering, 3rd edn. Wiley, New York
Brenner A, Riddell G E (1947) Proc Am Electroplaters Soc 34:156
Holbrook K A, Twish P J (1969) Plating 56:523
Mijner C H (1975) Electrodeposition & Surface Treatment 3(4):261
Gonda V K, Shawki S, El-Tawil H (1972) Met Finish 5:77
Song Y W, Shan D Y, Han E H (2008) Electrochemic Acta 53:2135
Ashassi-Sorkhabi A, Rafizadeh S H (2004) Surf Coat Technol 576:318
Lee C K (2008) Surf Coat Technol 202(19):4868
Ma H, Liu Z, Tian F, Huan S (2008) J Alloys Compd 450:348
Balaraju J H, Rajam K S (2008) J Alloys Compd 459:311
Chen C K, Feng H M, Liu H C, Hon M H (2002) Thin Solid Films 416:31
Zhu X-y, Guo Z-C, Zhai D (2001) Chinese Surf Eng,14, 01 (http://209.85.227.132/translate_c?hl)
Hong Z, Zi L, Qiang S (2008). Power Supply Techno 328 09 (http://209.85.227.132/translate_c?hl)
Yin-Ray, Chen Y-M, Hu H (2004). Material Protection 37, 01 (http://209.85.227.132/translate_c?hl)
Wu H, Li T-Ch, Li X (2008). Electroplating and Finishing, 30-10 (http://209.85.227.132/translate)
Lobanova L L, Batalova E V, Khranilov Y P (2008) Russ J Appl Chem 81(2):202
Yin X, Hong L, Chen B, Ko T M (2003) J Colloid Interf Sci Elsevier Sci 262(1):89
Jothi S, Lian J, Wei S (2013) J Alloys Compd 571:183
Guo R H, Jiang S X, Yuen C W M, Ng M C F, Lan J W, Zheng G H (2012) Fibers and Polymers 13(8):1037
Chen Z, Xiaoda X, Chee C W, Subodh M (2003) Surf Coat Technol 167:170
Braun F, Ana M T, Laura M C (2011) J Membrane Sci 382:252
Wanin, Kohn (1979) Int J of P/M and Powder Techn 15:16
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Loto, C.A. Electroless Nickel Plating – A Review. Silicon 8, 177–186 (2016). https://doi.org/10.1007/s12633-015-9367-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12633-015-9367-7