Abstract
To achieve high efficiency utilization of Panzhihua vanadium titano-magnetite, a new process of metalizing reduction and magnetic separation based on hot briquetting is proposed, and factors that affect the cold strength of the hot-briquetting products and the efficiency of reduction and magnetic separation are successively investigated through laboratory experiments. The relevant mechanisms are elucidated on the basis of microstructural observations. Experimental results show that the optimal process parameters for hot briquetting include a hot briquetting temperature of 475°C, a carbon ratio of 1.2, ore and coal particle sizes of less than 74 μm. Additionally, with respect to metalizing reduction and magnetic separation, the rational parameters include a magnetic field intensity of 50 mT, a reduction temperature of 1350°C, a reduction time of 60 min, and a carbon ratio of 1.2. Under these above conditions, the crushing strength of the hot-briquetting agglomerates is 1480 N, and the recovery ratios of iron, vanadium, and titanium are as high as 91.19%, 61.82%, and 85.31%, respectively. The new process of metalizing reduction and magnetic separation based on hot briquetting demonstrates the evident technological advantages of high efficiency separation of iron from other valuable elements in the vanadium titano-magnetite.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
J. Barksdale, Titanium: Its Occurrence, Chemistry, and Technology, 2nd edition, The Roland Press Company, New York, 1966, p. 1.
D. S. Chen, B. Song, L.N. Wang, T. Qi, Y. Wang, and W.J. Wang, Solid state reduction of Panzhihua titanomagnetite concentrates with pulverized coal, Miner. Eng., 24(2011), No.8, p. 864.
T. Hu, X.W. Lv, C.G. Bai, Z.G. Lun, and G.B. Qiu, Reduction behavior of Panzhihua titanomagnetite concentrates with coal, Metall. Mater. Trans. B, 44(2013), No.2, p. 252.
X. G. Si, X.G. Lu, C.W. Li, C.H. Li, and W.Z. Ding, Phase transformation and reduction kinetics during the hydrogen reduction of ilmenite concentrate, Int. J. Miner. Metall. Mater., 19(2012), No.5, p. 384.
R. S. Diao, New understanding about special problems of smelting vanadium-bearing titanomagnetite with BF, Iron Steel, 34(1999), No.6, p. 12.
J. Y. Ma, X.W. Sun, and S.X. Sheng, Intensified smelting of vanadium and titanium magnetite in blast furnace, Iron Steel, 35(2000), No.1, p. 4.
R. Huang, X.W. Lv, C.G. Bai, Q.Y. Deng, and S.W. Ma, Solid state and smelting reduction of Panzhihua ilmenite concentrate with coke, Can. Metall. Q., 51(2012), No.4, p.434.
G. Q. Zhang and O. Ostrovski, Reduction of ilmenite concentrates by methane-containing gas: Part I. Effects of ilmenite composition, temperature and gas composition, Can. Metall. Q., 40(2001), No.3, p. 317.
G. Q. Zhang and O. Ostrovski, Reduction of ilmenite concentrates by methane-containing gas: Part II: Effects of preoxidation and sintering, Can. Metall. Q., 40(2001), No.4, p. 489.
Y. Lei, Y. Li, J.H. Peng, W. Li, L.B. Zhang, and R.D. Wan, Carbothermic reduction of Panzhihua oxidized ilmenite in a microwave field, ISIJ Int., 51(2011), No.3, p. 337.
Z. F. Yuan, X.Q. Wang, C. Xu, W.B. Li, and M. Kwauk, A new process for comprehensive utilization of complex titania ore, Miner. Eng., 19(2006), No.9, p. 975.
V. E. Roshchin, A.V. Asanov, and A.V. Roshchin, Possibilities of two-stage processing of titaniferous magnetite ore concentrates, Russ. Metall., 2011(2011), No.6, p. 499.
Y. S. Sun, Y.X. Han, P. Gao, Z.H. Wang, and D.Z. Ren, Recovery of iron from high phosphorus oolitic iron ore using coal-based reduction followed by magnetic separation, Int. J. Miner. Metall. Mater., 20(2013), No.5, p. 411.
G. Wang, Y.G. Ding, J.S. Wang, X.F. She, and Q.G. Xue, Effect of carbon species on the reduction and melting behavior of boron-bearing iron concentrate/carbon composite pellets, Int. J. Miner. Metall. Mater., 20(2013), No.6, p. 522.
S. Y. Chen, P.H. Guo, X.L. Wu, and M.S. Chu, New process of metallization reduction-magnetic concentration-electroheat melting separation for vanadium titano-magnetite, J. Northeast. Univ. Nat. Sci., 34(2013), No.3, p. 378.
M. S. Chu, M.X. Ai, F.M. Shen, and J.I. Yagi, Mathematical modeling of blast furnace operation with charging carbon composite briquette based on multi-fluid model, Res. Iron Steel, 35(2007), No.1, p. 12.
M. S. Chu, Z.G. Liu, Z.C. Wang, and J.I. Yagi, Fundamental study on carbon composite iron ore hot briquette used as blast furnace burden, Steel Res. Int., 82(2011), No.5, p. 521.
M. S. Chu, J.I. Yagi, and H. Nogami, Numerical evaluation on lower temperature operation of blast furnaces by charging carbon composite agglomerates, Steel Res. Int., 78(2007), No.1, p. 10.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Chen, Sy., Chu, Ms. Metalizing reduction and magnetic separation of vanadium titano-magnetite based on hot briquetting. Int J Miner Metall Mater 21, 225–233 (2014). https://doi.org/10.1007/s12613-014-0889-6
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12613-014-0889-6