Abstract
The effects of intermediate annealing (IA) on the microstructure and texture of Ni-9.3at%W substrates have been investigated by using electron backscattering diffraction and X-ray diffraction. Results suggest that IA can optimize the homogeneity of deformation microstructure. Higher IA temperatures (without undergoing recrystallization during IA) will increase the copper-type components of deformation texture and improve the content of cube texture after recrystallization. Sharp cube texture (97.2%) can be obtained at the optimum IA temperature of 650°C. The mechanism underlying the transition of deformation texture can be interpreted as that IA increases the dislocation slipping ability and suppresses the twinning deformation of Copper orientation in the subsequent rolling process. The observed strengthening of cube texture as a result of IA treatment is presumably attributed to the reduction of noncube nucleation and the optimization of preferential growth surrounding the cube nuclei.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
A.O. Ijaduola, J.R. Thompson, A. Goyal, C.L.H. Thieme, and K. Marken, Magnetism and ferromagnetic loss in Ni-W textured substrates for coated conductors, Phys. C, 403(2004), No. 3, p. 163.
J. Eickemeyer, D. Selbmann, R. Opitz, B. de Boer, B. Holzapfel, L. Schultz, and U. Miller, Nickel-refractory metal substrate tapes with high cube texture stability, Supercond. Sci. Technol., 14(2001), No. 3, p. 152.
J. Eickemeyer, D. Selbmann, R. Opitz, H. Wendrock, E. Maher, U. Miller, and W. Prusseit, Highly cube textured Ni-W-RABiTS tapes for YBCO coated conductors, Phys. C, 372–376(2002), p. 814.
S. Zaefferer, T. Baudin, and R. Penelle, A study on the formation mechanisms of the cube recrystallization texture in cold rolled Fe-36% Ni alloys, Acta Mater., 49(2001), No. 6, p. 1105.
V.S. Sarma, J. Eickemeyer, C. Mickel, L. Schultz, and B. Holzapfel, On the cold rolling textures in some fcc Ni-W alloys, Mater. Sci. Eng. A, 380(2004), No. 1–2, p. 30.
Y. Zhao, H.L. Suo, Y.H. Zhu, J.C. Grivel, M. Gao, L. Ma, R.F. Fan, M. Liu, Y. Ji, and M.L. Zhou, Study on the formation of cubic texture in Ni-7at.% W alloy substrates by powder metallurgy routes, Acta Mater., 57(2009), No. 3, p. 773.
H. Yu and W. Liu, Effect of temperature on microstructure and texture of rolled Ni-9.3 at-%W alloy, Mater. Sci. Technol., 27(2011), No. 9, p. 1412.
V. Subramanya Sarma, J. Eickemeyer, L. Schultz, and B. Holzapfel, Recrystallisation texture and magnetisation behaviour of some FCC Ni-W alloys, Scripta Mater., 50(2004), No. 7, p. 953.
J. Eickemeyer, R. Hühne, A. Güth, C. Rodig, H. Klauß, and B. Holzapfel, Textured Ni-7.5 at.% W substrate tapes for YBCO-coated conductors, Supercond. Sci. Technol., 21(2008), No. 10, art. No. 105012.
J. Eickemeyer, R. Hühne, A. Güth, C. Rodig, U. Gaitzsch, J. Freudenberger, L. Schultz, and B. Holzapfel, Textured Ni-9.0 at.% W substrate tapes for YBCO-coated conductors, Supercond. Sci. Technol., 23(2010), No. 8, art. No. 085012.
M.M. Gao, H.L. Suo, J.C. Grivel, Y. Zhao, P.K. Gao, M. Liu, and L. Ma, Fabrication of the textured Ni-9.3 at.% W alloy substrate for coated conductors, IEEE Trans. Appl. Supercond., 21(2011), No. 3, p. 2969.
R. Hielscher and H. Schaeben, A novel pole figure inversion method: specification of the MTEX algorithm, J. Appl. Crystallogr., 41(2008), No. 6, p. 1024.
Z.W. Chen, J. Zhao, and S.S. Li, Texture evolution of Al-Mg-Li aeronautical alloys in in-situ tension, Int. J. Miner. Metall. Mater., 19(2012), No. 12, p. 1100.
J. Hirsch, K. Lücke, and M. Hatherly, Overview No. 76: Mechanism of deformation and development of rolling textures in polycrystalline f.c.c. metals-III. The influence of slip inhomogeneities and twinning, Acta Metall., 36(1988), No. 11, p. 2905.
W.M. Mao and X.M. Zhang, Quantitative Texture Analysis of Crystalline Materials, Metallurgical Industry Press, Beijing, 1995, p. 96.
P.P. Bhattacharjee, R.K. Ray, and N. Tsuji, Cold rolling and recrystallization textures of a Ni-5at.% W alloy, Acta Mater., 57(2009), No. 7, p. 2166.
B.J. Duggan, M. Hatherly, W.B. Hutchinson, and P.T. Wakefield, Deformation structures and textures in cold-rolled 70:30 brass, Met. Sci., 12(1978), No. 8, p. 343.
A.A. Ridha and W.B. Hutchinson, Recrystallisation mechanisms and the origin of cube texture in copper, Acta Metall., 30(1982), No. 10, p. 1929.
X.L. Li, W. Liu, A. Godfrey, D. Juul Jensen, and Q. Liu, Development of the cube texture at low annealing temperatures in highly rolled pure nickel, Acta Mater., 55(2007), No. 10, p. 3531.
P.A. Beck, P.R. Sperry, and H. Hu, The orientation dependence of the rate of grain boundary migration, J. Appl. Phys., 21(1950), No. 5, p. 420.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Liu, Jn., Liu, W., Tang, Gy. et al. Influence of intermediate annealing on the microstructure and texture of Ni-9.3at%W substrates. Int J Miner Metall Mater 21, 162–168 (2014). https://doi.org/10.1007/s12613-014-0880-2
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12613-014-0880-2