Abstract
The Al-rich waste with aluminium and hydrocarbon as the major contaminant is generated at the wastewater treatment unit of a polymer processing plant. In this research, the heat treatment of this Al-rich waste and its use to adjust the silica/alumina ratio of the high calcium fly ash geopolymer were studied. To recycle the raw Al-rich waste, the waste was dried at 110°C and calcined at 400 to 1000°C. Mineralogical analyses were conducted using X-ray diffraction (XRD) to study the phase change. The increase in calcination temperature to 600, 800, and 1000°C resulted in the phase transformation. The more active alumina phase of active γ-Al2O3 was obtained with the increase in calcination temperature. The calcined Al-rich waste was then used as an additive to the fly ash geopolymer by mixing with high calcium fly ash, water glass, 10 M sodium hydroxide (NaOH), and sand. Test results indicated that the calcined Al-rich waste could be used as an aluminium source to adjust the silica/alumina ratio and the strength of geopolymeric materials. The fly ash geopolymer mortar with 2.5wt% of the Al-rich waste calcined at 1000°C possessed the 7-d compressive strength of 34.2 MPa.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
G.T. Austin, Shreve’s Chemical Process Industries, 5th Ed., McGraw-Hill, Singapore, 1985, p.658.
D.A. Pereira, Barroso de Aguiar, F. Castro, M.F. Almeida, and J.A. Labrincha, Mechanical behavior of Portland cement mortars with incorporation of Al-containing salt slags, Cem. Concr. Res., 30(2000), p.1131.
M.J. Ribeiro, D.U. Tulyaganov, J.M. Ferreira, and J.A. Labrinacha, Recycling of Al-rich industrial sludge in refractory ceramic pressed bodies, Ceram. Int., 28(2002), No.3, p.319.
M.J. Ribeiro, D.U. Tulyaganov, J.M. Ferreira, and J.A. Labrinacha, High temperature mullite dissolution in ceramic bodes derived from Al-rich sludge, J. Eur. Ceram. Soc., 25(2005), No.5, p.703.
J. Davidovit, Geopolymer: Inorganic polymeric new materials, J. Therm. Anal., 37(1991), No. 8, p.1633.
J.G.S. Van Jaarsveld and J.S.J. Van Deventer, Effect of the alkali metal activator on the properties of fly ash-based geopolymers, Ind. Eng. Chem. Res., 88(1999), No.10, p.3932.
P. Chindaprasirt, C. Jaturapitakkul, W. Chalee, and U. Rattanasak, Comparative study on the characteristics of fly ash and bottom ash geopolymers, Waste Manage., 29(2009), No.2, p.539.
U. Rattanasak and P. Chindaprasirt, Influence of NaOH solution on the synthesis of fly ash geopolymer, Miner. Eng., 22(2009), No.12, p.1073.
S. Detphan and P. Chindaprasirt, Preparation of fly ash and rice husk ash geopolymer, Int. J. Miner. Metall. Mater., 16(2009), No.6, p.720.
U. Rattanasak, K. Pankhet, and P. Chindaprasirt, Effect of chemical admixtures on properties of high-calcium fly ash geopolymer, Int. J. Miner. Metall. Mater., 18(2011), No.3, p.364.
S. Songpiriyakij, T. Kubprasit, C. Jaturapitakkul, and P. Chindaprasirt, Compressive strength and degree of reaction of biomass- and fly ash-based geopolymer, Constr. Build. Mater., 24(2010), No.3, p.236.
J. Kano, S. Saeki, F. Saito, M. Tanjo, and S. Yamazaki, Application of dry grinding to reduction in transformation temperature of aluminum hydroxides, Int. J. Miner. Process., 60(2000), No.2, p.91.
T. Shiono, S. Okumura, H. Shiomi, T. Nishida, M. Kitamura, and M. Kamitani, Preparation of inorganic consolidated body using aluminium hydroxide mechanically activated by dry milling, J. Mater. Synth. Process., 8(2000), No.5–6, p.351.
A.R. Farinha, J.B. Ribeiro, R. Mendes, and M.T. Vieira, Shock activation of α-alumina from calcinated Al-rich sludge, Ceram. Int., 35(2009), No.5, p.1897.
B.Q. Zhu, B.X. Fang, and X.C. Li, Dehydration reactions ad kinetic parameters of gibbsite, Ceram. Int., 36(2010), No.8, p.2493.
V.P. Della, I. Kühn, and D. Hotza, Rice husk ash as an alternate source for active silica production, Mater. Lett., 57(2002), No.4, p.818.
A. Tonejc, M. Stubiċar, A. Tonejc, C. Kosanović, B. Subotić, and I. Šmit, Transformation of γ-AlOOH (boehmite), and Al(OH)3 (gibbsite) to α-Al2O3 (corundum) induced by high energy ball milling, J. Mater. Sci. Lett., 13(1994), No.7, p.519.
E. Wolska and W. Szajda, Use of infrared spectroscopy to identify crystalline aluminum hydroxides of the Al(OH)3-Fe(OH)3 system, J. Appl. Spectrosc., 38(1983), No.1, p.137.
M. Mora, D. Gutiérrez-Campos, C. Lavelle, and R.M. Rodríguez, Evaluation of Bayer process gibbsite reactivity in magnesium aluminate spinel formation, Mater. Sci. Eng. A, 454–455(2007), No.1, p.139.
X. Gong, Z. Nie, M. Qian, J. Liu, L.A. Pederson, D.T. Hobbs, and N.G. McDuffie, Gibbsite to Boehmite Transformation in Strongly Caustic and Nitrate Environments, Report No. WSRC-MS-2002-00850 submitted to the U.S. Department of Energy, 2002.
U. Rattanasak, P. Chindaprasirt, and P. Suwanvitaya, Development of high volume rice husk ash alumino silicate composites, Int. J. Miner. Metall. Mater., 17(2010), No.5, p.654.
G. Kovalchuk, A. Fernández-Jiménez, and A. Palomo, Alkali-activated fly ash: Effect of thermal curing conditions on mechanical and microstructural development: Part II. Fuel, 86(2007), No.3, p.315.
A. Fernández-Jiménez, A. Palomo, I. Sobrados, and J. Sanz, The role played by the reactive alumina content in the alkaline activation of fly ashes, Microporous Mesoporous Mater., 91(2006), No.1–3, p.111.
X.L. Guo, H.S. Shi, and A.D. Warren, Compressive strength and microstructural characteristics of class C fly ash geopolymer, Cem. Concr. Compos., 32(2010), No. 2, p.142.
K. Somna, C. Jaturapitakkul, P. Kajitvichyanukul, and P. Chindaprasirt, NaOH-activated ground fly ash geopolymer cured at ambient temperature, Fuel, 90(2011), No.6, p.2118.
P. De Silva, K. Sagoe-Crenstil, and V. Sirivivatnanon, Kinetics of geopolymerization: Role of Al2O3 and SiO2, Cem. Concr. Res., 37(2007), No.4, p.512.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Chindaprasirt, P., Rattanasak, U., Vongvoradit, P. et al. Thermal treatment and utilization of Al-rich waste in high calcium fly ash geopolymeric materials. Int J Miner Metall Mater 19, 872–878 (2012). https://doi.org/10.1007/s12613-012-0641-z
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12613-012-0641-z