Abstract
A critical issue in the model-based control of performance-augmenting exoskeleton systems is the unknown nonlinear dynamic properties of the systems or the uncertainties. An improper estimation of the system dynamics can cause instabilities in the system and generate considerable human-exoskeleton interaction forces during human motions. Thus, the controller of such exoskeleton systems needs to add robustness to stabilize it against the uncertainties. In this paper, we propose a global fast sliding mode control algorithm integrated in a hybrid controller for each exoskeleton leg to minimize human-exoskeleton interaction forces. By doing so, the proposed algorithm does not require an exact estimation of the dynamic properties of the exoskeleton system, but still minimizes the physical human-exoskeleton interaction (pHEI) forces. Finally, the performance of the proposed algorithm is verified by experiments on our lower exoskeleton system, which is used for human power augmentation and called “PRMI” exoskeleton. Our experimental results show that the proposed control algorithm provides a good control quality for the PRMI exoskeleton. The PRMI exoskeleton can support a wearer carrying heavy load while tracking the rapid movements of the wearer without obstructing them.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
W. Huo, S. Mohammed, J. C. Monero, and Y. Amirat, “Lower limb wearable robots for assistance and rehabilitation: a state of the art,” IEEE Systems Journal, no. 99, pp. 1–14, 2015. [click]
C. Mendez, Y. Aoustin, and C. Rengifo, “Evaluation of the aid provided by an exoskeleton in the reduction of the joint torques exerted by human lower limbs: a simulation study,” Latin America Transactions, IEEE (Revista IEEE America Latina), vol. 13, no. 2, pp. 428–433, 2015. [click]
D. Chen, M. Ning, B. Zhang, and G. Yang, “Control strategy of the lower-limb exoskeleton based on the EMG signal,” Proc. of IEEE International Conference on Robotics and Biominmetrics (ROBIO), pp. 2416–2420, 2014. [click]
A. C. Christine and V. K. Herman, “Assistive and rehabilitation robotics,” Journal of Behavioral Robotics, vol. 2, no. 4, pp. 175–185, 2011. [click]
X. Zhang, Z. Xiang, Q. Lin, and Q. Zhou, “The design and development of a lower limbs rehabilitation exoskeleton suit,” Proc. of International Conference on Complex Medical Engineering (CME), pp. 307–312, 2013. [click]
Z. Li, C. Y. Su, and A. Xue, “Development and learning control of a human limb with a rehabilitation exoskeleton,” IEEE Transactions on Industrial Electronics, vol. 61, no. 7, pp. 3776–3785, 2014. [click]
E. Rocon and J. L. Pons, Exoskeletons in Rehabilitation Robotics, Springer, Berlin Heidelberg, 2011. [click]
C. T. Freeman, D. Tong, Z. Cai, E. Rogers, K. Meadmore, and A. M. Hugers, “Phase-lead iterative learning control algorithms for functional electrical stimulation-based stroke rehabilitation,” Proc IMechE, Part I: J Systems and Control Engineering, vol. 225, no. 6, pp. 850–859, 2011. [click]
A. Tsukahara, Y. Hasegawa, and Y. Sankai, “Gait support for complete spinal cord injury patient by synchronized leg-swing with HAL,” Proc. of IROS, pp. 1737–1742, 2011. [click]
F. Veneman, R. Kruidhof, and H. V. D. Kooij, “Design and evaluation of the LOPES exoskeleton robot for interactive gait rehabilitation,” IEEE TNSRE, vol. 15, no. 3, pp. 379–386, 2007. [click]
A. M. Sander, “Rehabilitation: a demonstration of the art and science,” Robotica, vol. 7, pp. 533–534, 2001. [click]
H. Kim, J. Lee, J. Jang, S. Park, and C. Hang, “Design of an Exoskeleton with Minimized Energy Consumption based on using Elastic and Dissipative Elements,” International Journal of Control, Automation and Systems, vol. 13, no. 2, pp. 1–12, 2015. [click]
H. Kazerooni, “Human-Robot Interaction via the Transfer of Power and Information Signals,” IEEE TSMC, vol. 20, no. 2, pp. 450–463, 1990. [click]
H. Kazerooni and S. Mahoney, “Dynamics and Control of Robotic SystemsWorn By Humans,” ASME Journal of Dynamic Systems, Measurements, and Control, vol. 113, no. 3, pp. 379–387, 1991. [click]
H. Kazerooni and M. Her, “The Dynamics and control of a haptic interface device,” IEEE Trans. on Robotics and Automation, vol. 10, no. 4, pp. 453–464, 1994. [click]
H. Kazerooni, “The extender technology at the University of California, Berkeley,” Proc. of SICE, vol. 34, pp. 291–298, 1995.
H. Kazerooni, “Human augmentation and exoskeleton systems in Berkeley,” IJHR, vol. 4, no. 3, pp. 575–605, 2007. [click]
H. Kazerooni, “Exoskeleton for human power augmentation,” Proc. of IEEE/RSJ IROS, pp. 3459–3464, 2005. [click]
A. Zoss, H. Kazerooni, and A. Chu, “On the mechanical design of the Berkeley Lower Extremity Exoskeleton (BLEEX),” IEEE/RSJ IROS, pp. 3465–3472, 2005. [click]
H. Kazerooni, J. L. Racine, L. Huang, and R. Steger, “On the control of the Berkeley Lower Extremity Exoskeleton (BLEEX),” IEEE ICRA, pp. 4353–4360, 2005. [click]
H. Kazerooni, R. Steger, and L. Huang, “Hybrid control of the Berkeley Lower Extremity Exoskeleton (BLEEX),” IJRR Journal, vol. 25, no. 5-6, pp. 561–573, 2006. [click]
Z. Yang, L. Gui, X. Yang, and W. Gu, “Simulation research of exoskeleton suit based on neural network sensitivity amplification control,” IEEE ICAL, pp. 3340–3344, 2007. [click]
Z. Yang, Y. Zhu, X. Yang, and Y. Zhang, “Impedance control of exoskeleton suit based on RBF adaptive network,” International Conference on Intelligent Human-Machine Systems and Cybernetics, pp. 182–187, 2009. [click]
K. H. Low, X. Liu, and H. Yu, “Development of NTU wearable exoskeleton system for assistive technologies,” Proc. of IEEE International Conference on Mechatronics and Automation, pp. 1099–1105, 2005. [click]
Y. Sankai, “HAL: Hybrid assistive limb based on cybernics,” Springer Tracts in Advanced Robotics, vol. 66, pp. 25–34, 2011. [click]
J. Liu and X. Wang, Advanced Sliding Mode Control for Mechanical Systems, Tsinghua University Press, Beijing and Springer-Verlag Berlin Heidelberg, 2011. [click]
V. Utkin, J. Guldner, and J. Shi, Sliding Mode Control in Electromechanical Systems, Taylor & Francis, London, 1999.
Q. Bi, C. J. Yang, X. L. Deng, and J. C. Fan, “Human finger mechanical impedance modeling: Using multiplicative uncertain model,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, pp. 1–9, 2015. [click]
Author information
Authors and Affiliations
Corresponding author
Additional information
Recommended by Associate Editor Sukho Park under the direction of Editor PooGyeon Park. This research was supported by the grant of National Natural Science Foundation of China (Grant No. 61273256). The authors would like to thank the associate editor and the reviewers for their valuable comments.
Duong Mien Ka is a Ph.D. research student at University of Electronic Science and Technology of China. Now, he is also a lecturer at Faculty of Electronic Technology, Industrial University of Ho Chi Minh City, Viet Nam. He received the M.S. degree in Automation from Ho Chi Minh City University of Technology in 2010. His current research interests include mechatronics systems, intelligent robotic control, and human power augmentation exoskeleton.
Cheng Hong is a full Professor in School of Automation, a vice director of Center for Robotics, UESTC. He received Ph.D. degree in Pattern Recognition and Intelligent Systems from Xi’an Jiaotong University in 2003. Now he is the founding director of Pattern Recognition and Machine Intelligence Lab, UESTC. Before this, He was a postdoctoral at Computer Science School, Carnegie Mellon University, USA from 2006 to 2009. He was an associate Professor of Xi’an Jiaotong University since 2005. Since July 2000, he had been with Xi’an Jiaotong University, where he had been a team leader of intelligent Vehicle Group at the Institute of Artificial Intelligence and Robotics before going to USA. His current research interests include computer vision and machine learning, robotics, human computer interaction, multimedia signal processing. The team that Dr. Cheng was leading in XJTU had developed an intelligent driving platform-Spring robot, which has important social effect in China. Dr. Cheng has over 50 academic publications including two books-“Digital Signal Processing (Tsinghua University Press, Sep. 2007)” and “Autonomous Intelligent Vehicles: Theory, Algorithms and Implementation (Springer, Dec. 2011)”. He has been a senior member of IEEE, ACM, and Associate Editor of IEEE Computational Intelligence Magazine. He is a reviewer for many important journals and conferences (IEEE TITS, MAV, CVPR, ICCV, ITSC, IVS, ACCV, etc.). Dr. Cheng serves as Finance Chair of ICME 2014, Local arrangement chair of VLPR 2012, Registration Chair of the 2005 IEEE ICVES Dr. Cheng was teaching Digital Signal Processing and Introduction to Embedded systems for junior students at Automation department and also Advanced Digital Signal Processing for graduate students in Xi’an Jiaotong University. Now he is teaching Pattern Recognition and Machine Learning and Computer Vision for graduate students, and also Introduction to Artificial Intelligence and Digital Image Processing for junior students in UESTC.
Tran Huu Toan received the M.S. degree in Automation from Ho Chi Minh City University of Technology in 2009, and the Ph.D degree in Electronic Science and Technology from University of Electronic Science and Technology of China in 2015. His research interests include control applications, robot learning, and human-robot interaction.
Jing Qiu is currently working in the School of Mechatronics Engineering at the University of Electronic Science and Technology of China (UESTC). Prior to joining UESTC, she was a research assistant at the Institute of Ergonomics at Darmstadt University of Technology. She received her Ph.D. in ergonomics from Darmstadt University of Technology in 2010.
Rights and permissions
About this article
Cite this article
Ka, D.M., Hong, C., Toan, T.H. et al. Minimizing human-exoskeleton interaction force by using global fast sliding mode control. Int. J. Control Autom. Syst. 14, 1064–1073 (2016). https://doi.org/10.1007/s12555-014-0395-7
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12555-014-0395-7