Abstract
In this research work, microchannel fabrication on PMMA (Polymethyl-methacrylate) using a CO2 laser has been investigated thoroughly. Microchannels have been created on PMMA of diverse aspect ratio. Due to Gaussian nature of beam, the channel crosssection also possesses the near Gaussian shape. The optical properties of PMMA have been investigated using Far-infrared spectroscopy and micro-hardness test has been carried out to verify the presence of softened zone adjacent to laser ablated microchannels. To investigate the effects of individual parameters on microchannel fabrication, 27 numbers of experiments have been performed using full factorial method. Mathematical modeling of each parameter has been performed using nonlinear regression analysis of each factor. The effect of each input parameter viz. laser power, scanning speed and number of pulses per linear inch has been discussed on each microchannel characteristics. Multi-objective optimization has been performed based on desirability function. The results of this work will be further useful in developing fundamental theoretical models for laser ablation of microchannels on PMMA.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Hong, T. F., Ju, W. J., Wu, M. C., Tai, C. H., Tsai, C. H., and Fu, L. M., “Rapid Prototyping of PMMA Microfluidic Chips Utilizing a CO2 Laser,” Microfluidics and Nanofluidics, Vol. 9, No. 6, pp. 1125–1133, 2010.
Fernández-Pradas, J., Florian, C., Caballero-Lucas, F., Morenza, J., and Serra, P., “Femtosecond Laser Ablation of Polymethyl-Methacrylate with High Focusing Control,” Applied Surface Science, Vol. 278, pp. 185–189, 2013.
Khan Malek, C. G., “Laser Processing for Bio-Microfluidics Applications (Part II),” Analytical and Bioanalytical Chemistry, Vol. 385, No. 8, pp. 1362–1369, 2006.
Becker, H. and Locascio, L. E., “Polymer Microfluidic Devices,” Talanta, Vol. 56, No. 2, pp. 267–287, 2002.
Mathur, A., Roy, S. S., Tweedie, M., Mukhopadhyay, S., Mitra, S., and McLaughlin, J., “Characterisation of PMMA Microfluidic Channels and Devices Fabricated by Hot Embossing and Sealed by Direct Bonding,” Current Applied Physics, Vol. 9, No. 6, pp. 1199–1202, 2009.
Chang, T. C. and Molian, P. A., “Excimer Pulsed Laser Ablation of Polymers in Air and Liquids for Micromachining Applications,” Journal of Manufacturing Processes, Vol. 1, No. 1, pp. 1–17, 1999.
Klank, H., Kutter, J. P., and Geschke, O., “CO2-Laser Micromachining and Back-End Processing for Rapid Production of PMMA-based Microfluidic Systems,” Lab on a Chip, Vol. 2, No. 4, pp. 242–246, 2002.
Snakenborg, D., Klank, H., and Kutter, J. P., “Microstructure Fabrication with a CO2 Laser System,” Journal of Micromechanics and Microengineering, Vol. 14, No. 2, pp. 182–189, 2004.
Berrie, P. G. and Birkett, F. N., “The Drilling and Cutting of Polymethyl Methacrylate (Perspex) by CO2 Laser,” Optics and Lasers in Engineering, Vol. 1, No. 2, pp. 107–129, 1980.
Prakash, S., Acherjee, B., Kuar, A. S., and Mitra, S., “An Experimental Investigation on ND: YAG Laser Microchanneling on Polymethyl Methacrylate Submerged in Water,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 227, pp. 508–519, 2013.
Prakash, S. and Kumar, S., “Fabrication of Microchannels: A Review,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2014. DOI: 0954405414535581.
Kannatey-Asibu Jr, E., “Principles of Laser Materials Processing,” John Wiley & Sons, p. 130, 2008.
Wang, Z., Zheng, H., Lim, R., Wang, Z., and Lam, Y., “Improving Surface Smoothness of Laser-Fabricated Microchannels for Microfluidic Application,” Journal of Micromechanics and Microengineering, Vol. 21, No. 9, Paper No. 095008, 2011.
Yap, Y. C., Guijt, R. M., Dickson, T. C., King, A. E., and Breadmore, M. C., “Stainless Steel Pinholes for Fast Fabrication of High-Performance Microchip Electrophoresis Devices by CO2 Laser Ablation,” Analytical Chemistry, Vol. 85, No. 21, pp. 10051–10056, 2013.
Chung, C. K., Tan, T. K., Lin, S. L., Tu, K. Z., and Lai, C. C., “Fabrication of Sub-Spot-Size Microchannel of Microfluidic Chip using CO2 Laser Processing with Metal-Film Protection,” Micro & Nano Letters, Vol. 7, No. 8, pp. 736–739, 2012.
Yuan, D. and Das, S., “Experimental and Theoretical Analysis of Direct-Write Laser Micromachining of Polymethyl Methacrylate by CO2 Laser Ablation,” Journal of Applied Physics, Vol. 101, No. 2, Paper No. 024901, 2007.
Zakariyah, S. S., Conway, P. P., Hutt, D. A., Wang, K., and Selviah, D. R., “CO2 Laser Micromachining of Optical Waveguides for Interconnection on Circuit Boards,” Optics and Lasers in Engineering, Vol. 50, No. 12, pp. 1752–1756, 2012.
Davis, T. A. and Cao, J., “Effect of Laser Pulse Overlap on Machined Depth,” Transactions of the North American Manufacturing Research Institution of SME, Vol. 38, pp. 291–298, 2010.
Ryan, T. P., “Modern Experimental Design,” John Wiley & Sons, pp. 450–452, 2006.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Prakash, S., Kumar, S. Fabrication of microchannels on transparent PMMA using CO2 Laser (10.6 μm) for microfluidic applications: An experimental investigation. Int. J. Precis. Eng. Manuf. 16, 361–366 (2015). https://doi.org/10.1007/s12541-015-0047-8
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12541-015-0047-8