Abstract
The application of pressure in the assembly of devices containing thin porous layers has shown significant effects with the presence of a solid boundary contact. During this process, pore diameters of the thin porous layers are reduced. Thus, the porosity in the near wall region is effectively reduced. The reduced porosity significantly lowers the overall performance of the devices because of the limited fluid dynamic variables. A new method for the positional variation of porosity is proposed to compensate the fluid dynamic disadvantages and mass transport characteristics in the industrial devices such as filters, porous electroosmotic pump and fuel cells. In the present study, the novel method introduces a composite porous layer with high porosity in the outer region rather than in the central region of the porous media. A three-dimensional numerical simulation is performed to investigate the effects of this positional variation of porosity and the performance of the composite porous layer. A reasonable increase in flow rate is found in the wall region and in the central region, depending on the increment in the porosity in the outer region and on the orientation of the porous layer to the fluid flow.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Nield, D. A. and Bejan, A., “Convection in Porous Media,” Springer, 3rd Ed., pp. 6–14, 2006.
Chandrasekhara, B., “Flow Model for Velocity Distribution in Fixed Porous Beds under Isothermal Conditions,” Thermo and Fluid Dynamics, Vol. 12, No. 2, pp. 105–111, 1979.
Vafai, K. and Tien, C., “Boundary and Inertia Effects on Flow and Heat Transfer in Porous Media,” International Journal of Heat and Mass Transfer, Vol. 24, No. 2, pp. 195–203, 1981.
Bejan, A. and Poulikakos, D., “The Nondarcy Regime for Vertical Boundary Layer Natural Convection in a Porous Medium,” International Journal of Heat and Mass Transfer, Vol. 27, No. 5, pp. 717–722, 1984.
Brinkman, H. C., “A Calculation of the Viscous Force Exerted by a Flowing Fluid on a Dense Swarm of Particles,” Applied Scientific Research, Vol. 1, No. 1, pp. 27–34, 1949.
Poulikakos, D. and Kazmierczak, M., “Forced Convection in a Duct Partially Filled with a Porous Material,” Journal of Heat Transfer, Vol. 109, No. 3, pp. 653–662, 1987.
Sung, H. J., Kim, S. Y., and Hyun, J. M., “Forced Convection from an Isolated Heat Source in a Channel with Porous Medium,” International Journal of Heat and Fluid Flow, Vol. 16, No. 6, pp. 527–535, 1995.
Nield, D. A., Junqueira, S. L. M., and Lage, J. L., “Forced Convection in a Fluid-Saturated Porous-Medium Channel with Isothermal or Isoflux Boundaries,” Journal of Fluid Mechanics, Vol. 322, pp. 201–214, 1996.
Chen, S. C. and Vafai, K., “Analysis of Free Surface Momentum and Energy Transport in Porous Media,” Numerical Heat Transfer, Part A Applications, Vol. 29, No. 3, pp. 281–296, 1996.
Kaviany, M., “Laminar Flow through a Porous Channel Bounded by Isothermal Parallel Plates,” International Journal of Heat and Mass Transfer, Vol. 28, No. 4, pp. 851–858, 1985.
Vafai, K., “Convective Flow and Heat Transfer in Variable-Porosity Media,” Journal of Fluid Mechanics, Vol. 147, pp. 233–259, 1984.
Vafai, K., Alkire, R. L., and Tien, C. L., “An Experimental Investigation of Heat Transfer in Variable Porosity Media,” Journal of Heat Transfer, Vol. 107, No. 3, pp. 642–647, 1985.
Poulikakos, D. and Renken, K., “Forced Convection in a Channel Filled with Porous Medium, including the Effects of Flow Inertia, Variable Porosity, and Brinkman Friction,” Journal of Heat Transfer, Vol. 109, No. 4, pp. 880–888, 1987.
Roshandel, R., Farhanieh, B., and Saievar-Iranizad, E., “The Effects of Porosity Distribution Variation on PEM Fuel Cell Performance,” Renewable Energy, Vol. 30, No. 10, pp. 1557–1572, 2005.
Ling, Z., Yang, T., Meng, F. C., Yi, L., and Zhang, X. X., “Simulation and Experimental Study of a Porous Electroosmotic Pump,” Key Engineering Materials, Vol. 483, pp. 320–326, 2011.
Iliev, O., Mikelic, A., and Popov, P., “On Upscaling Certain Flows in Deformable Porous Media,” Multiscale Modeling & Simulation, Vol. 7, No. 1, pp. 93–123, 2008.
Andrä, H., Iliev, O., Kabel, M., Kirsch, R., Lakdawala, Z., and Ricker, S., “FluidStructure Interaction in Porous Media for Loaded Filter Pleats,” PAMM, Vol. 11, No. 1, pp. 489–490, 2011.
Roshandel, R. and Farhanieh, B., “The Effects of Non-Uniform Distribution of Catalyst Loading on Polymer Electrolyte Membrane Fuel Cell Performance,” International Journal of Hydrogen Energy, Vol. 32, No. 17, pp. 4424–4437, 2007.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Cheema, T.A., Lee, CY., Kim, GM. et al. Numerical investigation on the effects of the positional variation of porosity in thin porous layers. Int. J. Precis. Eng. Manuf. 15, 1405–1410 (2014). https://doi.org/10.1007/s12541-014-0483-x
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12541-014-0483-x