Abstract
Recently, a robot-based construction automation (RCA) project was finished in Korea, whose purpose was to employ a robotic system instead of human labor in steel beam assembly tasks. In that research, a robotic beam assembly (RBA) system was developed to execute a beam assembly task. A field application using the RBA system at an actual construction site was completed. Because a human operator had to board the cabin and manipulate the system in the air, causing possible safety problems, a teleoperation system was developed and is the subject of this paper. To evaluate the performance of the teleoperation system, a pointing task experiment based on Fitts’ law was conducted to determine whether it obeyed speed-accuracy tradeoff rules. Results are discussed and an overview of the actual bolting test using the teleoperation system is presented here. Finally, conclusions are drawn about the feasibility of implementing an RBA system with teleoperation in actual building construction applications.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Kang, S., Komoriya, K., Yokoi, K., Koutoku, T., Kim, B., and Park, S., “Control of impulsive contact force between mobile manipulator and environment using effective mass and damping controls,” Int. J. Precis. Eng. Manuf., Vol. 11, No. 5, pp. 697–704, 2010.
Kim, D., Chung, W., and Park, S., “Practical motion planning for car-parking control in narrow environment,” IET Control Theory Appl., Vol. 4, No. 1, pp. 129–139, 2010.
Lee, K., Chung, W., and Yoo, K., “Kinematic parameter calibration of a car-like mobile robot to improve odometry accuracy,” Mechatronics, Vol. 20, No. 5, pp. 582–595, 2010.
Lee, J., Kim, K., and Kang, M., “An analysis of static output feedback control for tendon driven master-slave manipulator-simulation study,” Int. J. Precis. Eng. Manuf., Vol. 12, No. 3, pp. 243–250, 2011.
Ikeda, Y. and Harada, T., “Application of the automated building construction system using the conventional construction method together,” Proc. of 23rd International Symposium on Automation and Robotics in Construction, pp. 722–727, 2006.
Chu, B., Kim, D., and Hong, D., “Robotic automation technologies in construction: a review,” Int. J. Precis. Eng. Manuf., Vol. 9, No. 3, pp. 81–91, 2009.
Kim, D., An, S., Cho, H., Jeong, J., Lee, B., Doh, N., and Kang, K., “Development of conceptual model of construction factory for automated construction,” Building and Environment, Vol. 44, pp. 1634–1642, 2009.
An, S., Jee, S., Choi, J., Kim, D., and Kang, K., “Evaluating work space environment in a construction factory for automated construction,” International Conference on Control, Automation and System, pp. 1942–1945, 2007.
Jung, K., Chu, B., Bae, K., Lee, Y., Hong, D., Park, S., and Lim, M., “Development of automation system for steel construction based on robotic crane,” International Conference on Smart Manufacturing Application, pp. 486–489, 2008.
Chu, B., Jung, K., Chu, Y., Hong, D., Lim, M., Park, S., Lee, Y., Lee, S., Kim, M., and Ko, K., “Robotic automation system for steel beam assembly in building construction,” International Conference on Autonomous Robots and Agents, pp. 38–43, 2009.
Chu, B., Jung, K., Cho, H., Lim, M., and Hong, D., “A novel approach of building construction using robotic technology,” International Conference on Construction Engineering and Project Management, pp. S2–1, 2011.
Chu, B., Jung, K., Ko, K., and Hong, D., “Mechanism and analysis of a robotic bolting device for steel beam assembly,” International Conference on Control, Automation and System, pp. 2351–2356, 2010.
Fitts, P. and Peterson, R., “Information capacity of discrete motor responses,” Journal of Experimental Psychology, Vol. 67, pp. 103–112, 1964.
Seow, S., “Information theoretic models of HCI: a comparison of the Hick-Hyman law and Fitts’ law,” Human-computer Interaction, Vol. 20, pp. 315–352, 2005.
Zhai, S., Kong, J., and Ren, X., “Speed-accuracy trade-off in Fitts’ law tasks-on the equivalency of actual and nominal pointing precision,” International Journal of Human-Computer Studies, Vol. 61, pp. 823–856, 2004.
Fimbel, E., Lemay, M., and Arguin, M., “Speed-accuracy trade-offs in myocontrol,” Human Movement Science, Vol. 25, pp. 165–180, 2006.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Jung, K., Chu, B., Park, S. et al. An implementation of a teleoperation system for robotic beam assembly in construction. Int. J. Precis. Eng. Manuf. 14, 351–358 (2013). https://doi.org/10.1007/s12541-013-0049-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12541-013-0049-3