Abstract
Frictional force is a resistant force that must be overcome to achieve relative motion between two components in contact. The economical and technological benefits of controlling friction and wear are tremendous. However, due to the complex nature of the phenomena, clear understanding of the mechanisms are yet to be achieved, particularly at the nano-scale where surface forces tend to dominate the tribological behavior of the system. In this paper the results of numerous theoretical, experimental, and numerical works on the fundamental mechanisms of friction at the nano-scale are reviewed. It is shown that friction coefficient values for nano-scale systems are quite varied depending on the conditions under which the system is investigated. As for the mechanism that causes friction at the nano-scale, interaction of the atoms plays a vital role. Furthermore, factors such as atomic radius, interatomic potential energy, and lattice parameters contribute to the degree of atomic interaction.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Stachowiak, G. W. and Batchelor, A. W., “Engineering tribology,” Butterworth-Heinemann, pp. 1–9, 2000.
Bhushan, B., “Principles and applications of tribology,” John Wiley & Sons, Inc, 1999.
Jost, H. P., “Tribology - origin and future,” Wear, Vol. 136, No. 1, pp. 1–17, 1990.
Meyer, E., Overney, R. M., Dransfeld, K. and Gyalog, T., “Nanoscience: friction and rheology on the nanometer scale,” World Scientific, pp. 1–28, 2002.
Suh, N. P., “The Genesis of Friction,” Wear, Vol. 69, No. 1, pp. 91–114, 1981.
VenKatachalam, S. and Liang, S. Y., “Effects of ploughing forces and friction coefficient in microscale machining,” J. Manuf. Sci. Eng., Vol. 12, No. 2, pp. 274–280, 2007.
Liu, Z., Sun, J. and Shen, W., “Study of plowing and friction at the surfaces of plastic deformed metals,” Tribol. Int., Vol. 35, No. 8, pp. 511–522, 2002.
Houston, J. E. and Kim, H. I., “Adhesion, friction, and mechanical properties of functionalized alkanethiol selfassembled monolayers,” Acc. Chem. Res., Vol. 35, No. 7, pp. 547–553, 2002.
Tambe, N. S. and Bhushan, B., “Scale dependence of micro/nano-friction and adhesion of MEMS/NEMS materials, coatings and lubricants,” Nanotechnology, Vol. 15, No. 11, pp. 1561–1570, 2004.
Sung, I.-H., Lee, H.-S. and Kim, D.-E., “Effect of surface topography on the frictional behavior at the micro/nano-scale,” Wear, Vol. 254, No. 10, pp. 1019–1031, 2003.
Bhushan, B., “Nanotribology and nanomechanics of MEMS/ NEMS and BioMEMS/BioNEMS materials and devices,” Microelectron. Eng., Vol. 84,Issue 3, pp. 387–412, 2007.
Fan, L.-S., Tai, Y.-C. and Muller, R. S., “Integrated Movable Micromechanical Structures for Sensors and Actuators,” IEEE Trans. Electron Devices, Vol. 15, No. 6, pp. 724–730, 1988.
McFadyen, I. R., Fullerton, E. E. and Carey, M. J., “State-of-the-art magnetic hard disk drives,” MRS Bull., Vol. 31, pp. 379–383, 2006.
Wang, R.-H. and Nayak, U. V., “Head-disk interface considerations at 10-nm flying height,” IEEE Trans. Magn., Vol. 38, No. 2, pp. 2132–2134, 2002.
Lee, S.-C. and Polycarpou, A. A., “Effect of hard-disk drive spindle motor vibration on dynamic microwaviness and flyingheight modulation,” Tribol. Int., Vol. 38, No. 6–7, pp. 665–674, 2005.
Kim, D. E., Chung, K. H. and Cha, K. H., “Tribological design methods for minimum surface damage of HDD slider,” Tribol. Int., Vol. 36, No. 4–6, pp. 467–473, 2003.
Tan, A. H. and Cheng, S. W., “A novel textured design for hard disk tribology improvement,” Tribol. Int., Vol. 39, No. 6, pp. 506–511, 2006.
Jianbin, L., Shizhu, W., Li, L. K. Y. and Wong, P. L., “Progresses and problems in nano-tribology,” Chin. Sci. Bull., Vol. 43, No. 5, pp. 369–378, 1998.
Hirano, M., “Atomistics of friction,” Surf. Sci. Rep., Vol. 60,Issue 8, pp. 159–201, 2006.
Persson, B. N. J., Sivebaek, I. M., Samoilov, V. N., Zhao, K., Volokitin, A. I. and Zhang, Z., “On the origin of Amonton’s friction law,” J. Phys.: Condens. Matter, Vol. 20,Issue 39, pp. 1–11, 2008.
Tomlinson, G. A., “A molecular theory of friction,” Philos. Mag. Vol. 7, No. 46, pp. 905–939, 1929.
Dienwiebel, M., Verhoeven, G. S., Pradeep, N. and Frenken, J. W. M., “Superlubricity of Graphite,” Phys. Rev. Lett., Vol. 92, No. 12, pp. 126101-1–126101-4, 2004.
Muser, M. H., “Structural lubricity: Role of dimension and symmetry,” Europhys. Lett., Vol. 66, No. 1, pp. 97–103, 2004.
Weiss, M. and Elmer, F.-J., “Dry friction in the Frenkel-Kontorova-Tomlinson model: Static properties,” Phys. Rev. B, Vol. 53, No. 11, pp. 7539–7549, 1996.
Kontorova, T. and Frenkel, Y. I., “On the theory of the plastic deformation and twinning,” Zh. Eksp. Teor. Fiz., Vol. 8, pp. 89–95, 1938.
Mansfield, M. and Needs, R. J., “Application of the Frenkel-Kontorova model to surface reconstructions,” J. Phy.: Condens. Matter, Vol. 2, No. 10, pp. 2361–2374, 1990.
Weiss, M. and Elmer, F.-J., “Dry friction in the Frenkel-Kontorova-Tomlinson model: Static properties,” Phys. Rev. B, Vol. 53, No. 11, pp. 7539–7549, 1996.
Gyalog, T. and Thomas, H., “Friction between atomically flat surfaces,” Europhys. Lett., Vol. 37, No. 3, pp. 195–200, 1997.
Bowden, F. P. and Tabor, D., “The friction and Lubrication of Solids,” Oxford: Clarendon Press, pp. 78–89, 2001.
Mate, C. M., McClelland, G. M., Erlandsson, R. and Chiang, S., “Atomic-scale friction of a tungsten tip on a graphite surface,” Phys. Rev. Lett., Vol. 59, No. 17, pp. 1942–1945, 1987.
Akamine, S., Barrett, R. C. and Quate, C. F., “Improved atomic force microscope images using microcantilevers with sharp tips,” Appl. Phys. Lett., Vol. 57, No. 3, pp. 316–318, 1990.
Fujisawa, S., Sugawara, Y., Ito, S., Mishima, S., Okada, T. and Morita, S., “The two-dimensional stick-slip phenomenon with atomic resolution,” Nanotechnology, Vol. 4, No. 3, pp. 138–142, 1993.
Ruan, J.-A. and Bhushan, B., “Frictional behavior of highly oriented pyrolytic graphite,” J. Appl. Phys., Vol. 76, No. 12, pp. 8117–8120, 1994.
Jiang, Z., Lu, C.-J., Bogy, D. B., Bhatia, C. S. and Miyamoto, T., “Nanotribological characterization of hydrogenated carbon films by scanning probe microscopy,” Thin Solid Films, Vol. 258,Issues 1–2, pp. 75–81, 1995.
Bhushan, B. and Li, X., “Micromechanical and tribological characterization of doped single-crystal silicon and polysilicon films for microelectromechanical systems devices,” J. Mater. Res., Vol. 12, No. 1, pp. 54–63, 1997.
Bhushan, B. and Kulkarni, A. V., “Effect of normal load on microscale friction measurements,” Thin Solid Films, Vol. 278,Issue 1, pp. 49–56, 1996.
Tambe, N. S. and Bhushan, B., “Friction model for the velocity dependence of nanoscale friction,” Nanotechnology, Vol. 16, No. 10, pp. 2309–2324, 2005.
Bhushan, B. and Sundararajan, S., “Micro/nanoscale friction and wear mechanisms of thin films using atomic force and friction force microscopy,” Acta Mater., Vol. 46, No. 11, pp. 3793–3804, 1998.
Nair, R. P. and Zou, M., “Surface-nano-texturing by aluminuminduced crystalliuzation of amorphous silicon,” Surf. Coat. Technol., Vol. 203,Issues 5–7, pp. 675–679, 2008.
Chung, K.-H., Jang, C.-E. and Kim, D.-E., “Wear characteristics of microscopic bushings for MEMS applications investigated by an AFM,” J. Micromech. Microeng., Vol. 17, No. 9, pp. 1877–1887, 2007.
Chung, K.-H., Lee, Y.-H., Kim, Y.-T., Kim, D.-E., Yoo, J. and Hong, S., “Nano-tribological characteristics of PZT thin film investigated by atomic force microscopy,” Surf. Coat. Technol., Vol. 201,Issue 18, pp. 7983–7991, 2007.
Chung, K.-H., Kim, H.-J., Lin, L.-Y. and Kim, D.-E., “Tribological characteristics of ZnO nanowires investigated by atomic force microscope,” Appl. Phys. A, Vol. 92, No. 2, pp. 267–274, 2008.
Frenkel, D. and Smit, B., “Understanding Molecular Simulation: From Algorithms to Applications,” Academic Press, pp. 63–64, 2001.
Friesner, R. A., “Ab initio quantum chemistry: Methodology and applications,” Proc. Natl. Acad. Sci. USA., Vol. 102, No. 19, pp. 6648–6653, 2005.
Sham, T.-L. and Tichy, J., “A scheme for hybrid molecular dynamics/finite element analysis of thin film lubrication,” Wear, Vol. 207, No. 1, pp. 100–106, 1997.
Kim, D. E. and Suh, N. P., “Molecular Dynamics Investigation of Two-Dimensional Atomic-Scale Friction,” J. Tribol., Vol. 116, No. 2, pp. 225–231, 1994.
Sorensen, M. R., Jacobsen, K. W. and Stoltze, P., “Simulations of atomic-scale sliding friction,” Phys. Rev. B, Vol. 53, No. 4, pp. 2101–2113, 1996.
Lia, B., Clapp, P. C., Rifkin, J. A. and Zhang, X. M., “Molecular dynamics simulation of stick-slip,” J. Appl. Phys., Vol. 90, No. 6, pp. 3090–3094, 2001.
Belak, J. and Stowers, I. F., “A molecular dynamics model of the orthogonal cutting process,” Proc. ASPE Annu. Conf., pp. 76–79, 1990.
Cagin, T., Che, J., Gardos, M. N., Fijany, A. and Goddard, W. A. III, “Simulation and experiments on friction and wear of diamond: a material for MEMS and NEMS application,” Nanotechnology, Vol. 10, No. 3, pp. 278–284, 1999.
Komanduri, R., Chandrasekaran, N. and Raff, L. M., “MD simulation of indentation and scratching of single crystal aluminum,” Wear, Vol. 240, No. 1–2, pp. 113–143, 2000.
Wu, H., Lin, B., Yu, S. Y. and Zhu, H. T., “Molecular Dynamics Simulation on the Mechanism of Nanometric Machining of Single-crystal Silicon,” Mater. Sci. Forum, Vol. 471–472, pp. 144–148, 2004.
Yang, J. and Komvopoulos, K., “A Molecular Dynamics Analysis of Surface Interference and Tip Shape and Size Effects on Atomic-Sclae Friction,” J. Tribol., Vol. 127,Issue 3, pp. 513–521, 2005.
Tupper, K. J. and Brenner, D. W., “Molecular dynamics simulations of friction in self-assembled monolayers,” Thin Solid Films, Vol. 253, No. 1–2, pp. 185–189, 1994.
Lan, H. and Zhang, S., “Molecular dynamics simulation on nanotribological properties of molecular deposition film during the scan process,” Tribol. Int., Vol. 37, No. 8, pp. 661–665, 2004.
Zhang, L. and Jiang, S., “Molecular simulation study of nanoscale friction for alkyl monolayers on Si(111),” J. Chem. Phys., Vol. 117, No. 4, pp. 1804–1811, 2002.
Tanaka, K., Kato, T. and Matsumoto, Y., “Molecular Dynamics Simulation of Vibrational Friction Force Due to Molecular Deformation in Confined Lubricant Film,” J. Tribol., Vol. 125, No. 3, pp. 587–591, 2003.
Sung, I.-H. and Kim, D.-E., “Molecular dynamics simulation study of the nano-wear characteristics of alkanethiol selfassembled monolayers,” Appl. Phys. A, Vol. 81, No. 1, pp. 109–114, 2005.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kim, HJ., Kim, DE. Nano-scale friction: A review. Int. J. Precis. Eng. Manuf. 10, 141–151 (2009). https://doi.org/10.1007/s12541-009-0039-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12541-009-0039-7