Abstract
Microstructural evolution and mechanical properties of nanostructured 1060 aluminum alloy tubes processed by tubular-channel angular pressing (TCAP) process were investigated using electron back-scattered diffraction (EBSD), transmission electron microscopy (TEM) and nanoindentation analyzes. EBSD scans revealed a homogeneous ultrafine grained microstructure after the third passes of the TCAP process. Apart from that the mean grain sizes of the TCAP processed tubes were refined to 566 nm, 500 nm and 480 nm respectively after the first, second and third passes. The results showed that after the three TCAP passes, the grain boundaries with a high angle comprised 78% of all the boundaries. This is in comparison to the first pass processed sample that includes approximately 20% HAGBs. The TEM inspection afforded an appreciation of the role of very low-angle misorientation boundaries in the process of refining microstructure. Nanoindentation results showed that hardness was the smallest form of an unprocessed sample while the largest form of the processed sample after the three passes of TCAP indicated the highest resistant of the material. In addition, the module of elasticity of the TCAP processed samples was greater from that of the unprocessed sample.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Y. T. Zhu, T. C. Lowe, and T. G. Langdon, Scripta Mater. 51, 825 (2004).
M. Kawasaki, Z. Horita, and T. G. Langdon, Mater. Sci. Eng. A 524, 143 (2009).
Y. Ito and Z. Horita, Mater. Sci. Eng. A 503, 32 (2009).
M. Reihanian, R. Ebrahimi, N. Tsuji, and M. Moshksar, Mater. Sci. Eng. A 473, 189 (2008).
A. Babaei, G. Faraji, M. Mashhadi, and M. Hamdi, Mater. Sci. Eng. A 558, 150 (2012).
D. Yadav and R. Bauri, Mater. Sci. Eng. A 539, 85 (2012).
M. Arzaghi, J. Fundenberger, L. Toth, R. Arruffat, L. Faure, B. Beausir, and X. Sauvage, Acta Mater. 60, 4393 (2012).
G. Faraji, M. M. Mashhadi, and H. S. Kim, Mater. Lett. 65, 3009 (2011).
A. S. Mohammadi, M. M. Mashhadi, and G. Faraji, Modares Mech. Eng. 15, 126 (2015).
G. Faraji, P. Yavari, S. Aghdamifar, and M. M. Mashhadi, J. Mater. Sci. Technol. 30, 134 (2014).
M. Mesbah, G. Faraji, and A. Bushroa, Mater. Sci. Eng. A 590, 289 (2014).
G. Faraji, M. M. Mashhadi, S.-H. Joo, and H. S. Kim, Rev. Adv. Mater. Sci. 31, 12 (2012).
A. J. Schwartz, M. Kumar, B. L. Adams, and D. P. Field, Electron Backscatter Diffraction in Materials Science, pp.263–266, Springer (2009).
C. Xu, M. Furukawa, Z. Horita, and T. G. Langdon, Acta Mater. 51, 6139 (2003).
A. Mishra, B. Kad, F. Gregori, and M. Meyers, Acta Mater. 55, 13 (2007).
J.-Y. Chang, J.-S. Yoon, and G.-H. Kim, Scripta Mater. 45, 347 (2001).
M. Cabibbo, E. Evangelista, and C. Scalabroni, Micron, 36, 401 (2005).
M. Reihanian, R. Ebrahimi, M. Moshksar, D. Terada, and N. Tsuji, Mater. Charact. 59, 1312 (2008).
M. Mohebbi and A. Akbarzadeh, Mater. Sci. Eng. A 528, 180 (2010).
I. Sabirov, M. Y. Murashkin, and R. Valiev, Mater. Sci. Eng. A 560, 1 (2013).
W. C. Oliver and G. M. Pharr, J. Mater. Res. 19, 3 (2004).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Mesbah, M., Faraji, G. & Bushroa, A.R. Electron back-scattered diffraction and nanoindentation analysis of nanostructured Al tubes processed by multipass tubular-channel angular pressing. Met. Mater. Int. 22, 288–294 (2016). https://doi.org/10.1007/s12540-016-5487-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12540-016-5487-x