Abstract
The wear property of NiTi is one of the most important properties of this alloy. In the current study, the effect of high-pressure torsion (HPT) process on the wear properties of an austenitic NiTi shape memory alloy is investigated. Full density NiTi samples with a composition of Ti-56 wt% Ni are fabricated using hot isostatic pressing (HIP), followed by the HPT process at room temperature, with an applied pressure of 6 GPa for 10 turns. The microstructural analysis reveals that the HIP-processed samples with a B2-NiTi phase evolve into significant grain refinement after HPT process and an interwoven B2-B19′ nanocrystalline/amorphous structure formed, leading to increased hardness in these samples. The results of the wear tests using a ball-on-disc configuration at room temperature demonstrate that the wear performance of the samples is improved after the HPT process. This is due to greater hardness and better pseudo-elasticity in the HPT-processed samples.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
A. P. Zhilyaev and T. G. Langdon, Prog. Mater. Sci. 53, 893 (2008).
K. Otsuka, X. Ren, Prog. Mater. Sci. 50, 511 (2005).
D. Y. Li, Wear 221, 116 (1998).
C. Zhang and Z. N. Farhat, Wear 267, 394 (2009).
L. G. Korshunov, V. G. Pushin, N. L. Chernenko, and V. V. Makarov, Phys. Met. Metallography 110, 91 (2010).
M. Farvizi, T. Ebadzadeh, M. R. Vaezi, H. S. Kim, and A. Simchi, Mater. Design 51C, 375 (2013).
M. Farvizi, T. Ebadzadeh, M. R. Vaezi, E. Y. Yoon, Y.-J. Kim, J. Y. Kang, H. S. Kim, and A. Simchi, Wear 334–335, 35 (2015).
E. Y. Yoon, D. J. Lee, B. H. Park, M. R. Akbarpour, M. Farvizi, and H. S. Kim, Met. Mater. Int. 19, 927 (2013).
M. I. Abd El Aal, and H. S. Kim, Mater. Design 53, 373 (2014).
Y. F. Sun, T. Nakamura, Y. Todaka, M. Umemoto, and N. Tsuji, Intermetallics 17, 256 (2009).
R. Singh, S. V. Divinski, H. Rösner, E. A. Prokofiev, R. Z. Valiev, and G. Wilde, J. Alloys Comp. 509, 290 (2011).
M. Peterlechner, T. Waitz, and H. P. Karnthaler, Script. Mater. 59, 566 (2008).
H. Shahmir, M. Nili-Ahmadabadi, Y. Huang, and T. G. Langdon, J. Mater. Sci., 49, 2998 (2014).
F. L. Nie, Y. F. Zhenga, Y. Cheng, S. C. Wei, and R. Z. Valiev, Mater. Letters 64, 983 (2010).
M. Farvizi, T. Ebadzadeh, M. R. Vaezi, E. Y. Yoon, Y.-J. Kim, H. S. Kim, and A. Simchi, J. Alloy Comp. 606, 21 (2014).
L. Krone, E. Schüller, M. Bram, O. Hamed, H.-P. Buchkremer, and D. Stöver, Mater. Sci Eng A 378, 185 (2004).
T. Waitz, V. Kazykhanov, and H. P. Karnthaler, Mater. Sci. Eng. A 52, 137 (2004).
W. C. Oliver and G. M. Pharr, J. Mater. Res. 7, 1564 (1992).
R. Liu and D. Y. Li, Script. Mater. 41, 691 (1999).
Z. Fan and C. Xie, Mater. Letters 62, 800 (2008).
Z. Li, G. Xiang and X. Cheng, Mater. Design 27, 324 (2006).
S. D. Prokoshkin, I. Y. Khmelevskaya, S. V. Dobatkin, I. B. Trubitsyna, E. V. Tatyanin, V. V. Stolyarov, and E. A. Prokofiev, Acta Mater. 53, 2703 (2005).
S. R. Agnew and J. R. Weertman, Mater. Sci. Eng. A 242, 174 (1998).
D. Y. Li, Wear 255, 617 (2003).
H. Z. Ye, R. Liu, and R. Eadie, Scrip. Mater. 41, 1039 (1999).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Farvizi, M., Akbarpour, M.R., Yoon, E.Y. et al. Effect of high-pressure torsion on the microstructure and wear behavior of NiTi alloy. Met. Mater. Int. 21, 891–896 (2015). https://doi.org/10.1007/s12540-015-5098-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12540-015-5098-y