Abstract
It is well known that axial inhomogeneity of the stress distribution within a thin-strip causes defects such as edge waves and center buckling during the thin-strip coiling process. In the current study, an analytical model was utilized to investigate the effects of processing parameters such as strip crown, spool geometry, and coiling tension on the elastic stress distribution and deformation of the strip during the coiling process. In the present investigation, the elastic modulus was introduced as a function of temperature and axial distance for better simulation of the process. According to the present analyses, it was found that improvement of the strip flatness might be achieved by suppressing the strip crown, increasing the thickness of the spool with the shape of a swollen hollow cylinder, and lowering the coiling tension with transient increase at the beginning stage of the coiling process only. This study will be helpful for better understanding of identifying the proper processing parameters during the coiling process.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
J. Y. Jung and Y. T. Im, J. Mater. Proc. Technol. 63, 248 (1997).
J. Y. Jung and Y. T. Im, J. Mater. Proc. Technol. 96, 163 (1999).
T. Kawanami, T. Asamura, and H. Matsumoto, J. Mater. Proc. Technol. 22, 257 (1990).
H. C. Kwon, I. S. Han, and M. S. Chun, Proc. 10th Int. Conf. Techn. Plast. (eds._G. Hirt and A. E. Tekkaya), p.37, WTH Aachen University, Aachen, Germany (2011).
R. B. Sims and J. A. Place, Br. J. Appl. Phys. 4, 213 (1953).
D. B. Miller and M. Thornton, Proc. 5th Int. Rolling Conf. (ed. M. C. Gleave), p.73, Institute of Metals, London, United Kingdom (1990).
A. A. Sarban, Proc. 2nd Int. Conf. on Modelling of Metal Rolling Proc. (eds. Beynon JH, Ingham P, Teichert H, and Waterson K), p.92, Institute of Materials, London, United Kingdom (1996).
S. Yanagi, S. Hattori, and Y. Maeda, J. JSTP 39, 51 (1998).
S. Yanagi, S. Hattori, Y. Maeda, H. Ibata, Y. Sugimoto, and M. Sawada, Proc. 7th Int. Conf. on Steel Rolling, p.150, Iron and Steel Institute of Japan, Chiba, Japan (1998).
A. E. H. Love, A Treatise on the Mathematical Theory of Elasticity, 4th. ed., pp.274–276, Dover Publications, New York (1944).
S. Han, H. Seong, Y. Ahn, C. I. Garcia, A. J. DeArdo, and I. Kim, Met. Mater. Int. 15, 521 (2009).
E. J. Chun, J. S. Lee, H. H. Do, S. J. Kim, Y. S. Choi, Y. H. Park, and N. H. Kang, Korean J. Met. Mater. 50, 487 (2012).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Park, WW., Kim, DK., Im, YT. et al. Effects of processing parameters on elastic deformation of the coil during the thin-strip coiling process. Met. Mater. Int. 20, 719–726 (2014). https://doi.org/10.1007/s12540-014-4017-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12540-014-4017-y