Abstract
The tensile deformation behavior of ferrite-austenite duplex high nitrogen steel has been investigated by interrupted tensile tests and compared with that of fully austenitic high nitrogen steel. It shows that ferrite is softer than austenite and most of the strain in early and later stages of deformation is accommodated by ferrite, while austenite undergoes a deformation-induced martensitic transformation. Such accommodation of a large amount of strain in ferrite is responsible for rapidly increasing work hardening rate and the resultant higher ultimate tensile strength of duplex high nitrogen steel as compared to those of fully austenitic high nitrogen steel, although duplex steel contains a smaller amount of N than austenitic steel.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
F. K. Yan, G. Z. Liu, N. R. Tao, and K. Lu, Acta Mater. 60, 1059 (2012).
T. S. Byun, N. Hashimoto, and K. Farrell, Acta Mater. 52, 3889 (2004).
O. Bouaziz, S. Allain, C. P. Scott, P. Cugy, and D. Barbier, Current Opinion in Solid State and Materials Science 15, 141 (2011).
T.-H. Lee, C.-S. Oh, S.-J. Kim, and S. Takaki, Acta Mater. 55, 3649 (2007).
T.-H. Lee, C.-S. Oh, and S.-J. Kim, Scripta Mater. 58, 110 (2008).
J. W. Simmons, Mater. Sci. Eng. A 207, 159 (1996).
V. G. Gavriljuk and H. Berns, High Nitrogen Steels, pp.281–284, Springer-Verlag, Berlin (1999).
U. Kamachi Mudali and Baldev Raj, High Nitrogen Steels and Stainless Steels, p.252, Narosa Publication House, New Delhi (2004).
M. O. Speidel, Met. Sci. and Heat Treatment 47, 489 (2005).
P. Millner, C. Solenthaler, P. J. Uggowitzer, and M. O. Speidel, Acta Metall. Mater. 42, 2211 (1994).
J. Y. Choi, J. H. Ji, S. W. Hwang, and K. T. Park, Mater. Sci. Eng. A 534, 673 (2012).
J. Y. Choi, J. H. Ji, S. W. Hwang, and K. T. Park, Mater. Sci. Eng. A 535, 32 (2012).
C.-H. Seo, K. H. Kwon, K. Choi, K.-H. Kim, J. H. Kwak, S. Lee, and N. J. Kim, Scripta Mater. 66, 519 (2012).
K. H. Kwon, J. S. Jeong, J.-K. Choi, Y. M. Koo, Y. Tomota, and N. J. Kim, Met. Mater. Int. 18, 751 (2012).
K. H. Kwon, B.-C. Suh, S.-I. Baik, Y.-W. Kim, J.-K. Choi, and N. J. Kim, Sci. Technol. Adv. Mater. 14, 014204 (2013).
N. J. Kim and G. Thomas, Metall. Trans. A 12, 483 (1981).
S. Harjo, Y. Tomota, P. Lukáš, D. Neov, M. Vrána, P. Mikula, and M. Ono, Acta Mater. 49, 2471 (2001).
N. Jia, R. Lin Peng, D. W. Brown, B. Clausen, and Y. D. Wang, Metall. Mater. Trans. A 39, 3134 (2008).
L. Fu, Z. Li, H. Wang, W. Wang, and A. Shan, Scripta Mater. 67, 297 (2012).
K. Choi, C.-H. Seo, H. Lee, S. K. Kim, J. H. Kwak, K. G. Chin, K.-T. Park, and N. J. Kim, Scripta Mater. 63, 1028 (2010).
J.-Y. Park and Y.-S. Ahn, Korean J. Met. Mater. 50, 793 (2012).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kim, B., Trang, T.T.T. & Kim, N.J. Deformation behavior of ferrite-austenite duplex high nitrogen steel. Met. Mater. Int. 20, 35–39 (2014). https://doi.org/10.1007/s12540-014-1009-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12540-014-1009-x