Abstract
We applied the crystal plasticity finite element method (CPFEM) based on a rate sensitivity model to examine the subgrain texture evolution of FCC metals under shear deformation. We used two kinds of microstructure models with the same orientation distribution function (ODF) but different spatial arrangements or misorientation distributions (MDs). One contained a great high frequency around low misorientation angles and the other a great high frequency near high misorientation angles. Different misorientation angles among neighboring crystals caused different interactions among them, particularly at the subgrain scale. The difference in MD affected the evolution of texture and average misorientation angles during deformation. The average misorientation angles of the subgrain boundaries increased with shear strain.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
W. A. Backofen, Trans. AIME. 188, 1454 (1950).
F. Montheillet, M. Cohen, and J. J. Jonas, Acta metall. 32, 2077 (1984).
J. G. Sevillano, P. V. Houtte, and E. Aernoudt, Z. Metallk. 66, 367 (1975).
L. S. Toth, P. Gilormini, and J. J. Jonas, Acta metal. 36, 3077 (1988).
G. I. Taylor, J. Inst. Metals 62, 307 (1938).
A. A. Nazarov, N. A. Enikeev, A. E. Romanov, T. S. Orlova, I. V. Alexandrov, I. J. eyerlein, and R. Z. Valiev, Acta mater. 54, 985 (2006).
N. Hansen, Scripta metall. mater. 27, 1447 (1992).
D. Kuhlmann-Wilsdorf and N. Hansen, Scripta metall. mater. 25, 1557 (1991).
D. A. Hughes, Q. Liu, D.C. Chrzan, and N. Hansen, Acta mater. 45, 105 (1997).
J.-H. Cho, Adv. Mat. Res. 26–28, 1003 (2007).
V. Rnadle, The Measurement of Grain boundary Geometry, Institute of Physics Publishing (1993).
ABAQUS version 6.5, Analysis User’s manual, Hibbitt, Karlsson and Sorensen, Pawtucket, RI (2004).
D. Peirce, R. J. Asaro, and A. Needleman, Acta metall. 31, 1951 (1983).
R. J. Asaro and A. Needleman, Acta metall. 33, 923 (1985).
S. R. Kalidindi, C. A. Bronkhorst, and L. Anand, J. Mech. Phys. Solids 40, 537 (1992).
S.-J. Park, S.-H. Choi, K. H. Oh, and J. A. Szpunar, Mater. Sci. Forum 408-412, 377 (2002).
S.-J. Park, Ph.D. thesis, Seoul National Univ., Seoul, Korea (2000).
Y.-S. Song, B.-J. Kim, H.-W. Kim, S.-B. Kang, and S.-H. Choi, J. Kor. Inst. Met. & Mater. 46, 135 (2008).
Y.-S. Song, D.-W. Kim, H.-S. Yang, S.-H. Han, K.-G. Chin, and S.-H. Choi, J. Kor. Inst. Met. & Mater. 47, 274 (2009).
M. Miodownik, A. W. Godfrey, E. A. Holm, and D. A. Hughes, Acta mater. 47, 2661 (1999).
J. K. Mackenzie, Biometrika 45, 229 (1958).
P. R. Dawson, D. P. Mika, and N. R. Barton, Scripta mater. 47, 713 (2002).
D. P. Mika and P. R. Dawson, Acta. mater. 47, 1335 (1999).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Chang, H.J., Han, H.N., Park, S.J. et al. Texture evolution in FCC metals from initially different misorientation distributions under shear deformation. Met. Mater. Int. 16, 553–558 (2010). https://doi.org/10.1007/s12540-010-0805-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12540-010-0805-1