Abstract
The high temperature mechanical properties of Zr50Ni27Nb18Co5 amorphous ribbons, proposed as metallic membrane material for hydrogen purification are presented. The mechanical behavior of the amorphous alloy, which generally does not exhibit a super-cooled liquid region, can be categorized into varying temperature regimes. A strain rate dependent phenomenon was observed between 425°C < T < 490°C in the strain rate range of 10−6s−1 to 10−2s−1. However, the alloy did not exhibit Newtonian-flow characteristics at the varied test temperature and strain rate range employed in this study. Detailed analyses indicated that in these temperature regimes structural changes occur, resulting in the formation of nanocrystalline phases. The results from these mechanical tests corroborated with the microstructural changes that occurred at these temperatures/strain rates.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
J. Lu, G. Ravichandran, and K. L. Johnson, Acta. mater. 51, 3429 (2003).
J. P. Chu, C. L. Chiang, T. Mahalingam, and T. G. Nieh, Scripta mater. 49, 435 (2003).
X. L. Fu, Y. Li, and C. A. Schuh, Acta mater. 55, 3059 (2007).
K. J. Laws, B. Gun, and M. Ferry, Mater. Sci. Eng. A 480, 198 (2008).
K. C. Chan, L. Liu, and J. F. Wang, J. Non Crystall. Solids 353, 3758 (2007).
Y. Saotome, Y. Noguchi, T. Zhang, and A. Inoue, Mater. Sci. Eng. A 375–377, 389 (2004).
G. P. Zhang, Y. Liu, and B. Zhang, Scripta mater. 54, 897 (2006).
D. S. Sung, Master’s Thesis, Yonsei University, Seoul, Korea (2005).
S. Yamaura, Y. Shimpo, H. Okouchi, M. Nishida, O. Katija, H. Kimura, and A. Inoue, Mater. Trans. 44, 1885 (2003).
S. Yamaura, Y. Shimpo, H. Okouchi, M. Nishida, O. Katija, and A. Inoue, Mater. Trans. 45, 330 (2004).
Y. Shimpo, S. Yamaura, M. Nishida, H. Kimura, and A. Inoue, J. Membrane Sci. 286, 170 (2006).
S. Yamaura, M. Sakurai, M. Hasegawa, K. Wakoh, Y. Shimpo, M. Nishida, H. Kimura, E. Matsubara, and A. Inoue, Acta mater. 53, 3703 (2005).
X. Q. Guo, D. V. Louzguine, S. Yamaura, L. Q. Ma, W. Sun, M. Hasegawa, and A. Inoue, Mater. Sci. Eng. A 338, 97 (2002).
S. Hara, K. Sakaki, N. Itoh, H. M. Kimura, K. Asami, and A. Inoue, J. Membrane Sci. 164, 289 (2000).
S. Jayalakshmi, K. B. Kim, and E. Fleury, J. Alloy. Compds. 417, 195 (2006).
Yamaura, Private Communication.
D. Y. Lee, Y. C. Kim, E. Fleury, and Y. B. Kim, Unpublished Results.
S. Jayalakshmi, S. O. Park, K. B. Kim, E. Fleury, and D. H. Kim, Mater. Sci. Eng. A 449–451, 920 (2007).
F. E. Luborsky and J. L. Walter, J. Appl. Phys. 47, 3648 (1976).
S. Ashok, N. S. Stoloff, M. E. Glicksman, and T. Slavin, Scripta metall. 15, 331 (1981).
M. A. Munoz-Morris, S. Surinach, L. K. Varga, M. D. Baro, and D. G. Morris, Scripta mater. 47, 31 (2002).
Y. Kawamura, T. Shibata, A. Inoue, and T. Masumoto, Mater. Trans. JIM 40, 335 (1999).
M. Heggen, F. Spaepen, and M. Feuerbacher, J. Appl. Phys. 97, 033506 (2005).
Y. Kawamura, T. Shibata, A. Inoue, and T. Masumoto, Appl. Phy. Lett. 69, 1208 (1996).
W. J. Kim, Intermetallics 15, 282 (2007).
A. V. Sergueeva, N. A. Mara, J. D. Kuntz, E. J. Lavernia, and A.K. Mukherjee, Phil. Mag. 85, 2671 (2005).
T. G. Nieh, C. Schuh, J. Wadsworth, and Y. Li, Intermetallics 10, 1177 (2002).
F. Spaepen, Acta metall. 25, 407 (1977).
C. L. Chiang, J. P. Chu, C. T. Lo, T. G. Nieh, Z. X. Wang, and W. H. Wang, Intermetallics 12, 1057 (2004).
D. H. Bae, H. K. Lim, S. H. Kim, D. H. Kim, and W. T. Kim, Acta mater. 50, 1749 (2002).
V. Ocelik, Y. V. Fursova, V. A. Khonik, and K. Csach, Phys. Solid State 42, 697 (2000).
W. J. Kim, Y. K. Sa, J. B. Lee, and H. G. Jeong, Intermetallics 14, 1391 (2006).
Y. Kawamura, T. Shibata, A. Inoue, and T. Masumoto, Scripta mater. 37, 431 (1997).
P. Chu, C. L. Chiang, T. G. Nieh, and Y. Kawamura, Intermetallics 10, 1191 (2002).
T. Mukai, T. G. Nieh, Y. Kawamura, A. Inoue, and K. Higashi, Scripta mater. 46, 43 (2002).
R. Maddin and T. Masumoto, Mater. Sci. Eng. 9, 153 (1972).
H. M. Kimura, K. Asami, A. Inoue, and T. Masumoto, Corr. Sci. 35, 909 (1993).
S. W. Lee, M. Y. Huh, E. Fleury, and J. C. Lee, Acta mater. 54, 349 (2006).
M. H. Cohen and D. Turnbull, J. Chem. Phys. 31, 1164 (1975).
A. S. Argon and H. Y. Kuo, Mater. Sci. Eng. 39, 101 (1979).
M. L. Falk and J. S. Langer, Phys. Rev. E. 57, 7192 (1998).
J. S. Langer, Scripta mater. 54, 275 (2006).
A. S. Argon, Acta metall. 27, 17 (1979).
Y. Shi, M. B. Katz, H. Li, and M. L. Falk, Phys. Rev. Lett. 98, 185505 (2007).
J. S. Langer and A. Lemaltre, Phys. Rev. Lett. 94, 175701 (2005).
M. Demetriou, J. S. Harmon, M. Tao, G. Duan, K. Samwer, and W. L. Johnson, Phys. Rev. Lett. 97, 065502 (2006).
J. Patterson and D. R. H. Jones, Scripta metall. 13, 947 (1979).
A. Sergueeva, N. Mara, and A. K. Mukherjee, J. Non-Crystall. Solids 317, 169 (2003).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Jayalakshmi, S., Fleury, E. High temperature mechanical properties of rapidly quenched Zr50Ni27Nb18Co5 amorphous alloy. Met. Mater. Int. 15, 701–711 (2009). https://doi.org/10.1007/s12540-009-0701-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12540-009-0701-0