Abstract
The opening of building facade has a strong influence on energy consumption. However, making full use of solar energy and natural wind to reduce energy consumption is a challenge for architects. The aim of this study is to investigate the influence of the facade design on energy consumption from an operable aspect. The evaluation comes from an integrated approach combining daylighting, thermal performance and natural ventilation. The study is based on computer simulation technique utilizing simulation tools EnergyPlus and Fluent. To facilitate the use of EnergyPlus, a simple graphic user interface has been developed by Matlab. The interface can set the parameters of EnergyPlus and process the wind pressure coefficients calculated by Fluent. With this interface, three type facade configurations with different areas or position changes have been modelled. The results show that opening area, compared with opening positions, exerts a greater influence on energy consumption. The opening position changes have a positive influence; however, this influence is small: at around 2%.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Alzoubi HH, Al-Zoubi AH (2010). Assessment of building facade performance in terms of daylighting and the associated energy consumption in architectural spaces: Vertical and horizontal shading devices for southern exposure facades. Energy Conversion and Management, 51: 1592–1599.
ASHRAE (2001). ASHRAE Handbook: Fundamentals. Atlanta, USA: American Society of Heating, Refrigerating and Air-Conditioning Engineers.
Autodesk (2010). Autodesk Ecotect Analysis. Available: http://usa.autodesk.com/ecotect-analysis.
Bodart M, De Herde A (2002). Global energy savings in offices buildings by the use of daylighting. Energy and Buildings, 34: 421–429.
Catalina T, Virgone J, Blanco E (2008). Development and validation of regression models to predict monthly heating demand for residential buildings. Energy and Buildings, 40: 1825–1832.
Chen Q (2009). Ventilation performance prediction for buildings: A method overview and recent applications. Building and Environment, 44: 848–858.
Compagnon R (1997). RADIANCE: A Simulation Tool for Daylighting Systems. The Martin Centre for Architectural and Urban Studies, University of Cambridge, UK. Available: http://radsite.lbl.gov/radiance/refer/rc97tut.pdf.
Cóstola D, Blocken B, Hensen JLM (2009). Overview of pressure coefficient data in building energy simulation and airflow network programs. Building and Environment, 44: 2027–2036.
DesignBuilder Software (2012). DesignBuilder. Available: http://www.designbuilder.co.uk.
Dubois MC (2003). Shading devices and daylight quality: An evaluation based on simple performance indicators. Lighting Research and Technology, 35: 61–76.
EnergyPlus (2009). EnergyPlus Manual: Documentation Version 3.1. US Department of Energy, USA.
Feustel HE (1999). COMIS—An international multizone air-flow and contaminant transport model. Energy and Buildings, 30: 3–18.
Fluent (2002). Airpak 2.1 User’s Guide.
GB50189 (2005). Design Standard of Energy Efficient Designing for Public Buildings. Bejing: China Architecture and Building Press. (in Chinese)
Jaffal I, Inard C, Ghiaus C (2009). Fast method to predict building heating demand based on the design of experiments. Energy and Buildings, 41: 669–677.
Johnson M-HD (2010). Assess and Implement Natural and Hybrid Ventilation Models in Whole-Building Energy Simulations. MS Thesis, University of Colorado at Boulder, USA.
Klein SA, Beckman WA, Mitchell JW, Duffie JA, Duffie NA, Freeman TL, Mitchell JC, Braun JE, Evans BL, Kummer JP, et al. (2004). TRNSYS 16—A Transient System Simulation program: User Manual. Solar Energy Laboratory. University of Wisconsinet at Madison, USA.
Köse DA, Dick E (2010). Prediction of the pressure distribution on a cubical building with implicit LES. Journal of Wind Engineering and Industrial Aerodynamics, 98: 628–649.
Li DHW, Lam JC, Wong SL (2005). Daylighting and its effects on peak-load determination. Energy, 30: 1817–1831.
Lim HC, Thomas TG, Castro IP (2009). Flow around a cube in a turbulent boundary layer: LES and experiment. Journal of Wind Engineering and Industrial Aerodynamics, 97: 96–109.
Loutzenhiser PG, Maxwell GM, Manz H (2007). An empirical validation of the daylighting algorithms and associated interactions in building energy simulation programs using various shading devices and windows. Energy, 32: 1855–1870.
Mardaljevic J (2000). Daylight Simulation: Validation, Sky Models and Daylight Coefficients. PhD thesis, De Montfort University, UK.
Pappas A, Zhai Z (2008). Numerical investigation on thermal performance and correlations of double skin facade with buoyancy-driven airflow. Energy and Buildings, 40: 466–475.
Ravikumar P, Prakash D (2011). Analysis of thermal comfort in a residential room with insect proof screen: A case study by numerical simulation methods. Building Simulation, 4: 217–225.
Reinhart C, Fitz A (2006). Findings from a survey on the current use of daylight simulations in building design. Energy and Buildings, 38: 824–835.
Richards PJ, Hoxey RP (2012). Pressures on a cubic building—Part 1: Full-scale results. Journal of Wind Engineering and Industrial Aerodynamics, 102: 72–86.
Rijal HB, Tuohy P, Humphreys MA, FNicol JF, Samuel A (2011). An algorithm to represent occupant use of windows and fans including situation-specific motivations and constraints. Building Simulation, 4: 117–134.
Samant S, Yang F (2007). Daylighting in atria: The effect of atrium geometry and reflectance distribution. Lighting Research and Technology, 39: 147–157.
Seifert J, Li Y, Axley J, Rosler M (2006). Calculation of wind-driven cross ventilation in buildings with large openings. Journal of Wind Engineering and Industrial Aerodynamics, 94: 925–947.
Sonal R (2006). Performance evaluation of natural ventilation strategy in a north American climate. ASME International Solar Energy Conference (ISEC2006), Denver, USA.
Sreshthaputra A, Haberl J, Andrews MJ (2004). Improving building design and operation of a Thai Buddhist temple. Energy and Buildings, 36: 481–494.
Swami MV, Chandra S (1988). Correlations for pressure distribution on buildings and calculation of natural-ventilation airflow. ASHRAE Transactions, 94(1): 243–266.
Tominaga Y, Mochidab A, Yoshiec R, Kataokad H, Nozue T, Yoshikawaf M, Shirasawa T (2008). AIJ guidelines for practical applications of CFD to pedestrian wind environment around buildings. Journal of Wind Engineering and Industrial Aerodynamics, 96: 1749–1761.
University of Strathclyde (2012). ESP-r Version 11.1. Available: http://www.esru.strath.ac.uk/Programs/ESP-r.htm.
US Department of Energy (2012). EnergyPlus. Available: http://apps1.eere.energy.gov/buildings/energyplus.
Walton GN (1989). AIRNET—A Computer Program for Building Airflow Network Modeling, NISTIR 89-4072. Gaithersburg, USA: National Institute of Standards and Technology.
Walton GN, Dols S (2005). CONTAM V2.4 User Guide and Program Documentation, NISTIR 7251. Gaithersburg, USA: National Institute of Standards and Technology.
Wang L, Chen Q (2005). On solution characteristics of coupling of multizone and CFD program in building air distribution simulation. Paper presented at 9th International IBPSA Conference, Montréal.
Wang L, Wong NH (2009). Coupled simulations for naturally ventilated rooms between building simulation (BS) and computational fluid dynamics (CFD) for better prediction of indoor thermal environment. Building and Environment, 44: 95–112.
Ward LG, Shakespeare R (1998). Rendering with Radiance: The Art and Science of Lighting Visualization. San Francisco: Morgan Kaufmann.
Woloszyn M, Rode C (2008). Tools for performance simulation of heat, air and moisture conditions of whole buildings. Building Simulation, 1: 5–24.
Zain-Ahmed A, Sopian K, Othman MYH, Sayigh AAM, Surendran PN (2002). Daylighting as a passive solar design strategy in tropical buildings: A case study of Malaysia. Energy Conversion and Management, 43: 1725–1736.
Zhang Q, Huang J (2004). Chinese Typical Year Weather Data for Architectural Use. Beijing: China Machine Press. (in Chinese)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
You, W., Qin, M. & Ding, W. Improving building facade design using integrated simulation of daylighting, thermal performance and natural ventilation. Build. Simul. 6, 269–282 (2013). https://doi.org/10.1007/s12273-013-0135-6
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12273-013-0135-6