Abstract
Today’s vehicles are designed with lighter weight to increase performance and to lower fuel consumption, while at the same time meeting the demands of safety requirements. Reducing the cross-section of structural elements to achieve weight reduction can lead to adverse effects on passive safety of the vehicle. In such cases, necessary design modifications must be created to overcome the adverse effects. For this purpose, front rail columns with crush initiators are used in the front zone of cars. These shock-absorbing elements act as energy consuming devices that convert impact energy (kinetic energy) into plastic deformation energy. Simulation of this energy conversion phenomenon is the subject of this paper. The primary objective of this study is to computationally determine how various crush initiators can reduce the maximum crushing force and how different types of structural modifications affect the observed folding form. The ribs near the crash area are placed in two rows and four different configurations on all facing sides of the column in order to decrease reaction forces and absorb more kinetic energy. These structures are analyzed under axially loaded crushing forces using the explicit nonlinear finite element analysis solver ANSYS/LS-DYNA.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Cheng, Q., Altenhof, W. and Li, L. (2006). Experimental investigations on the crush behaviour of AA6061-T6 aluminum square tubes with different types of through-hole discontinuities. Thin Walled Structures, 44, 441–454.
Cho, Y. B., Bae, C. H., Suh, M. W. and Sin, H. C. (2006). A vehicle front frame crash design optimization using hole-type and dent-type crush initiators. Thin Walled Structures, 44, 415–428.
DiPaolo, B. P., Monterio, P. J. M. and Gronsky, R. (2004). Quasi-static axial crush response of a thin wall, stainless steel box component. Int. J. Solids and Structures, 41, 3707–3733.
Eren, I. (2002). Optimization of Energy Absorbed and Reactional Forces on Chassis Frontal Columns that Directly Face the Crashworthiness Effects on Vehicles. Unpublished Ph.D. Dissertation, Balıkesir University, Balıkesir.
Kang, W. J. and Huh, H. (2000). Crash analysis of thin walled structures with elasto-plastic finite element method. Key Engineering Materials, 177–180, 201–212.
Kim, H. S. and Huh, H. (2000). Collapse analysis of thin walled structures by finite element limit analysis. Key Engineering Materials, 177–180, 709–714.
Krauss, C. A. and Laananen, D. H. (1994). A parametric study of crush initiators for a thin-walled tube. Int. J. Vehicle Design 15,3/4/5, 385–401.
Lee, M. H., Kim, H. Y. and Oh, S. I. (2006). Crushing characteristic of double hat-shaped members of different materials joined by adhesive bonding and self-piercing rivet. Int. J. Automotive Technology 7,5, 565–570.
LS-DYNA (1998). Theory Manual. Livermore. CA: LSTC.
Nalepa, E. (1990). Crash-worthiness simulation of the opel vectra using the explicit finite element method. Int. J. Vehicle Design 11,2, 160–166.
Wierzbicki, T. and Abramowicz, W. (1983). On the crushing mechanics of thin-walled structures. J. Applied Mechanics, 50, 727–734.
Xue, L., Lin, Z. and Jiang, Z. (1997). Effects of Initial Geometrical Imperfection on Square Tube Collapse. Shanghai Jiao Tong University Press, China.
Zaouk, A. K., Bedewi, N. E., Kan, C. D. and D. Marzougui (1999). Validation of a Non-Linear Finite Element Vehicle Model Using Multiple Impact Data. The George Washington University. FHWA/NHTSA National Crash Analysis Center Pub.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Eren, I., Gür, Y. & Aksoy, Z. Finite element analysis of collapse of front side rails with new types of crush initiators. Int.J Automot. Technol. 10, 451–457 (2009). https://doi.org/10.1007/s12239-009-0051-z
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12239-009-0051-z