Abstract
In this paper, newly polyether polyol containing fluorine in the side chain, 6,9-polyoctafluorine hexanoic ether tetradecane glycol (PFEG) was successfully synthesized via cationic ring-opening polymerization method. By means of one-step bulk polymerization method, its mixture with polytetramethylene ether glycol (PTMEG) was used as soft segment to fabricate fluorinated thermoplastic polyurethane (FTPU) elastomers, which were further characterized by SEM, 1HNMR, FTIR, XRD, contact angle, tensile and thermal stability measurements. Hemocompatibility in vitro was evaluated through protein adsorption and platelet adhesion measurements, while cytocompatibility was assessed by MTT assay and cell adhesion. Results showed that the as-synthesized FTPU elastomers have satisfactory blood compatibility, cytocompatibility, mechanical and thermal stability properties.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
J. W. Boretos and W. S. Pierce, Science, 158, 1481 (1967).
C. Tonelli, T. Trombetta, M. Scicchitano, G. Simeone, and G. Ajroldi, J. Appl. Polym. Sci., 59, 311 (1996).
C. Tonelli and G. Ajroldi, J. Appl. Polym. Sci., 87, 2279 (2003).
C. C. Chen, W. J. Liang, and P. L. Kuo, J. Polym. Sci. Pol. Chem., 40, 486 (2002).
X. F. Yang, J. Li, S. G. Croll, D. E. Tallman, and G. P. Bierwagen, Polym. Degrad. Stabil., 80, 51 (2003).
B. B. Akhremitchev, B. K. Monney, K. G. Marra, T. M. Chapman, and G. C. Walker, Langmuir, 14, 3976 (1998).
T. Takakura, M. Kato, and M. Yamabe, Macromol. Chem. Phys., 191, 625 (1990).
H. Tan, M. Guo, R. N. Du, X. Y. Xie, J. H. Li, Y. P. Zhong, and Q. Fu, Polymer, 45, 1647 (2004).
M. Delucchi, S. Turri, A. Barbucci, M. Bassi, S. Novelli, and G. Cerisola, J. Polym. Sci. Part B: Polym. Phys., 40, 52 (2002).
C. Tonelli, T. Trombetta, M. Scicchitano, and G. Castiglioni, J. Appl. Polym. Sci., 57, 1031 (1995).
K. Tamareselvy, K. Venkatarao, and H. Kothandaraman, J. Polym. Sci. Pol. Chem., 28, 2679 (1990).
T. Kashiwagi, Y. Ito, and Y. Imanishi, J. Biomater. Sci. Polym. Ed., 5, 157 (1994).
D. Lahiouhel, B. Ameduri, and B. Boutevin, J. Fluorine. Chem., 107, 81 (2001).
W. Xu, B. Lu, Y. Hu, L. Song, and S. Nie, Polym. Adv. Technol., 23, 877 (2012).
L. F. Wang, Polymer, 48, 894 (2007).
M. E. Ryan, J. L. C. Fonseca, S. Tasker, and J. P. S. Badyal, J. Phys. Chem., 99, 7060 (1995).
Y. Wang, F. Qiu, B. Xu, J. Xu, Y. Jiang, D. Yang, and P. Li, Prog. Org. Coat., 76, 876 (2013).
M. Castellano, C. Tonelli, A. Turturro, and G. Simeone, J. Mater. Sci., 49, 2519 (2014).
M. S. Shin, Y. H. Lee, M. M. Rahman, and H. D. Kim, Polymer, 54, 4873 (2013).
M. Jiang, X. Zhao, X. Ding, Z. Zheng, and Y. Peng, Eur. Polym. J., 41, 1798 (2005).
P. F. Liu, L. Ye, Y. G. Liu, and F. D. Nie, Polym. Bull., 66, 503 (2011).
H. Tan, X. Y. Xie, J. H. Li, Y. Zhang, and Q. Fu, Polymer, 45, 1495 (2004).
H. Tan, J. H. Li, M. Guo, R. N. Du, X. Y. Xie, Y. P. Zhong, and Q. Fu, Polymer, 46, 7230 (2005).
D. Tan, X. Zhang, J. Li, H. Tan, and Q. Fu, J. Biomed. Mater. Res. A, 100, 380 (2012).
M. Jiang, Z. H. Zheng, X. B. Ding, X. Chang, and Y. Peng, Colloid. Polym. Sci., 285, 1049 (2007).
S. Saidi, F. Guittard, and C. Guimon, and S. Géribaldi, Eur. Polym. J., 42, 702 (2006).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Jia, RP., Zong, AX., He, XY. et al. Synthesis of newly fluorinated thermoplastic polyurethane elastomers and their blood compatibility. Fibers Polym 16, 231–238 (2015). https://doi.org/10.1007/s12221-015-0231-6
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12221-015-0231-6