Abstract
This paper presents the results of a current research of the tensile properties: ultimate strength and stiffness modulus in composites using natural reinforcements. Hemp short fibres and pine sawdust were randomly distributed in polypropylene matrices to produce composite plates with 5 mm thickness by injection moulding technique. The specimens were cut from these plates with bone dog shape or plane bars, and tested in tensile and four points bending, respectively. Stiffness modulus and ultimate stresses were obtained for different weight fraction content of reinforcement and discussed taking in account the failure modes. Four series of pine sawdust reinforced specimens were immersed in water in periods up to 20 days. Periodically, the specimens were removed from the water recipient and immediately tested. The damage effect of water immersion time was discussed based in the tensile results and in the water absorption curves.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
P. Mapleston, Modern Plastics International, May, 39 (1997).
A. K. Bledzki, S. Reihmane, and J. Gassan, Polym. Plast. Technol. Eng., 37, 451 (1998).
J. Gassan, Composites Part A: Appl. Sci. Manufact., 33A, 369 (2002).
J. George, M. S. Sreekala, and S. Thomas, Polym. Eng. Sci., 41, 1471 (2001).
K. Jayaraman, Comp. Sci. Technol., 63, 367 (2003).
E. T. N. Bisanda and M. P. Ansell, J. Mater. Sci., 27, 1690 (1992).
A. Espert, W. Camacho, and S. Karlson, J. Appl. Polym. Sci., 89, 2353 (2003).
J. Gassan and A. K. Bledzki, Appl. Compos. Mater., 7, 373 (2000).
K. M. M. Rao, K. M. Rao, and A.V. R. Prasad, Materials and Design, 31, 508 (2010).
S. Jain, R. Kumar, and U. K. Jindal, J. Mater. Sci., 27, 4598 (1992).
G. F. Torres and M. L. Cubillas, Polym. Testing, 24, 694 (2005).
P. J. Herrera-Franco and A. Valadez-González, Compos. Part B: Eng., 36, 595 (2005).
M. Tajvidi and G. Ebrahimi, J. Appl. Polym. Sci., 88, 941 (2003).
A. Espert, F. Vilaplana, and S. Karlson, Compos. Part A: Appl. Sci. Manufact., 35A, 1267 (2004).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ferreira, J.A.M., Capela, C. & Costa, J.D. A study of the mechanical properties of natural fibre reinforced composites. Fibers Polym 11, 1181–1186 (2010). https://doi.org/10.1007/s12221-010-1181-7
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12221-010-1181-7