Abstract
There is an increased interest in developing reliable condition monitoring and fault diagnosis systems of machines like induction motors; such interest is not only in the final phase of the failure but also at early stages. In this paper, several levels of damage of rotor bars under different load conditions are identified by means of vibration signals. The importance of this work relies on a simple but effective automatic detection algorithm of the damage before a break occurs. The feature extraction is based on discrete wavelet analysis and autocorrelation process. Then, the automatic classification of the fault degree is carried out by a binary classification tree. In each node, comparing the learned levels of the breaking off correctly identifies the fault degree. The best results of classification are obtained employing computational intelligence techniques like support vector machines, multilayer perceptron, and the k-NN algorithm, with a proper selection of their optimal parameters.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
K. N. Gyftakis, D. V. Spyropoulos, J. C. Kappatou and E. D. Mitronikas, A novel approach for broken bar fault diagnosis in induction motors through torque monitoring, Energy Conversion, IEEE Transactions, 28 (2) (2013) 267–277.
K. M. Siddiqui, K. Sahay and V. Giri, Health monitoring and fault diagnosis in induction motor-a review, International J. of Advanced Research in Electrical, Electronics and Instrumentation Engineering, 3 (1) (2014) 6549–6565.
P. Zhang, Y. Du, T. G. Habetler and B. Lu, A survey of condition monitoring and protection methods for medium-voltage induction motors, Industry Applications, IEEE Transactions, 47 (1) (2011) 34–46.
J. Rangel-Magdaleno, H. Peregrina-Barreto, J. Ramirez-Cortes, R. Morales-Caporal and I. Cruz-Vega, Vibration analysis of partially damaged rotor bar in induction motor under different load condition using dwt, Shock and Vibration 3530464) (2016) 11.
J. Zarei, M. A. Tajeddini and H. R. Karimi, Vibration analysis for bearing fault detection and classification using an intelligent filter, Mechatronics, 24 (2) (2014) 151–157.
J. Rangel-Magdaleno, R. Romero-Troncoso, R. A. Osornio-Rios, E. CabalYepez and L. M. Contreras-Medina, Novel methodology for online half-brokenbar detection on induction motors, Instrumentation and Measurement, IEEE Transactions, 58 (5) (2009) 1690–1698.
A. Ordaz-Moreno, R. de Jesus Romero-Troncoso, J. A. Vite-Frias, J. R. Rivera-Gillen and A. Garcia-Perez, Automatic online diagnosis algorithm forbroken-bar detection on induction motors based on discrete wavelet transform for fpga implementation, Industrial Electronics, IEEE Transactions, 55 (5) (2008) 2193–2202.
D. Z. Li, W. Wang and F. Ismail, A spectrum synch technique for induction motor health condition monitoring, Energy Conversion, IEEE Transactions, 30 (4) (2015) 1348–1355.
P. A. Delgado-Arredondo, A. Garcia-Perez, D. Morinigo-Sotelo, R. A. Osornio-Rios, J. G. Avina-Cervantes, H. Rostro-Gonzalez and R. D. J. RomeroTroncoso, Comparative study of time-frequency decomposition techniques for fault detection in induction motors using vibration analysis during startup transient, Shock and Vibration (2015).
L. Deng and R. Zhao, A vibration analysis method based on hybrid techniques and its application to rotating machinery, Measurement, 46 (9) (2013) 3671–3682.
H. Su, K. T. Chong and R. R. Kumar, Vibration signal analysis for electrical fault detection of induction machine using neural networks, Neural Computing and Applications, 20 (2) (2011) 183–194.
Y. Gritli, A. Di Tommaso, R. Miceli, F. Filippetti and C. Rossi, Closed-loopbandwidth impact on mvsa for rotor broken bar diagnosis in irfoc double squirrel cage induction motor drives, Clean Electrical Power (ICCEP), 2013 International Conference, IEEE (2013) 529–534.
K. M. Siddiqui and V. Giri, Broken rotor bar fault detection in induction motors using wavelet transform, Computing, Electronics and Electrical Technologies (ICCEET), 2012 International Conference, IEEE (2012) 1–6.
M. Delgado, A. Garcia, J. Ortega, J. Cardenas and L. Romeral, Multidimensional intelligent diagnosis system based on support vector machine classifier, Industrial Electronics (ISIE), 2011 IEEE International Symposium, IEEE (2011) 2124–2131.
H. Keskes and A. Braham, Recursive undecimated wavelet packet transform and dag svm for induction motor diagnosis, Industrial Informatics, IEEE Transactions, 11 (5) (2015) 1059–1066.
R. Gopinath, C. S. Kumar, K. Vishnuprasad and K. Ramachandran, Feature mapping techniques for improving the performance of fault diagnosis of synchronous generator, International J. of Prognostics and Health Management, 6 (25).
D. Matić, F. Kulić, M. Pineda-Sánchez and I. Kamenko, Support vector machine classifier for diagnosis in electrical machines: Application to broken bar, Expert Systems with Applications, 39 (10) (2012) 8681–8689.
F. AlThobiani et al., An application to transient current signal based induction motor fault diagnosis of fourier-bessel expansion and simplified fuzzy artmap, Expert Systems with Applications, 13 (2013) 5372–5384.
A. Widodo, B.-S. Yang, D.-S. Gu and B.-K. Choi, Intelligent fault diagnosis system of induction motor based on transient current signal, Mechatronics, 19 (5) (2009) 680–689.
L. A. García-Escudero, O. Duque-Perez, D. Morinigo-Sotelo and M. PerezAlonso, Robust condition monitoring for early detection of broken rotor bars in induction motors, Expert Systems with Applications, 38 (3) (2011) 2653–2660.
B.-S. Yang et al., Fault diagnosis of induction motor based on decision trees and adaptive neuro-fuzzy inference, Expert Systems with Applications, 36 (2) (2009) 1840–1849.
M. Seera, C. P. Lim, S. Nahavandi and C. K. Loo, Condition monitoring of induction motors: a review and an application of an ensemble of hybrid intelligent models, Expert Systems with Applications, 41 (10) (2014) 4891–4903.
S. G. Mallat, A theory for multiresolution signal decomposition: the wavelet representation, Pattern Analysis and Machine Intelligence, IEEE Transactions, 11 (7) (1989) 674–693.
J. Rafiee and P. Tse, Use of autocorrelation of wavelet coefficients for fault diagnosis, Mechanical Systems and Signal Processing, 23 (5) (2009) 1554–1572.
X. Wang, A. Wang, S. Zheng, Y. Lin and M. Yu, A multiple autocorrelation analysis method for motor imagery eeg feature extraction, Control and Decision Conference (2014 CCDC), The 26th Chinese, IEEE (2014) 3000-3004.
S. Haykin, N. Network, A comprehensive foundation, Neural Networks (2004).
B. E. Boser, I. M. Guyon and V. N. Vapnik, A training algorithm for optimal margin classifiers, Proceedings of the Fifth Annual Workshop on Computational Learning Theory, ACM (1992) 144–152.
M. Hofmann, Support vector machineskernels and the kernel trick, An elaboration for the Hauptseminar Reading Club: Support Vector Machines.
J. Friedman, T. Hastie and R. Tibshirani, The elements of statistical learning, Springer Series in Statistics Springer, Berlin, 1 (2001).
J. C. Platt, N. Cristianini and J. Shawe-Taylor, Large margin dags for multiclass classification, NIPS, MIT Press 12 (1999) 547–553.
W. Yan, K. Goebel and J. C. Li, Classifier performance measures in multifault diagnosis for aircraft engines, Aero-Sense 2002, International Society for Optics and Photonics (2002) 88–97.
Author information
Authors and Affiliations
Corresponding author
Additional information
Recommended by Associate Editor Byeng Dong Youn
Israel Cruz Vega received the B.Sc. in Control and Automation Engineering from the Instituto Politécnico Nacional, and M.Sc., as well as the Ph.D. in Automatic Control, from the Centro de Investigación y de Estudios Avanzados of the Instituto Politécnico Nacional in México, DF., in 2001, 2004 and 2011, respectively. He is currently a CONACYT Research Fellow commissioned to the Instituto Nacional de Astrofísica, Óptica y Électronica with the Electronics Department. His specific research interests are in the area of Automatic Control, Machine Learning, Intelligent Systems and Evolutionary Algorithms.
Jose de Jesus Rangel-Magdaleno received the B.E. in Electronics Engineering and the M.E. in Electrical Engineering in Hardware Signal Pocessing from Universidad de Guanajuato, Mexico in 2006 and 2008, respectively. He received the Ph.D. in Mechatronics from the Universidad Autonoma de Queretaro, Mexico in 2011. He is currently Titular Researcher at the Electronics Department at INAOE, Mexico. His research interests include FPGAs, signal and image processing, instrumentation and mechatronics.
Juan Manuel Ramirez-Cortes received the B.Sc. from the National Polytechnic Institute, Mexico, the M.Sc. from the National Institute of Astrophysics, Optics and Electronics (INAOE), Mexico, and the Ph.D. from Texas Tech University, all in electrical engineering. He is currently a Titular Researcher at the Electronics Department, INAOE, in Mexico, and member of the Mexican National Research System (SNI) level 1. His research interests include signal and image processing, neural networks, fuzzy logic, digital systems, and sensors.
Hayde Peregrina-Barreto received the B.Sc. from the Technological Institute of Cuautla, Mexico, the M.Sc. in Engineering from University of Guanajuato, Mexico, and the Ph.D. in Engineering from Autonomous University of Queretaro, Mexico. She is currently Titular Researcher in Computer Science at INAOE, Mexico, and member of the Mexican National Research System (SNI), level 1. Her research interests include signal and image processing, in the field of image processing include mathematical morphology, color appearance models, segmentations, and human visual perception.
Rights and permissions
About this article
Cite this article
Cruz-Vega, I., Rangel-Magdaleno, J., Ramirez-Cortes, J. et al. Automatic progressive damage detection of rotor bar in induction motor using vibration analysis and multiple classifiers. J Mech Sci Technol 31, 2651–2662 (2017). https://doi.org/10.1007/s12206-017-0508-3
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-017-0508-3