Abstract
Chemical mechanical polishing (CMP) is a semiconductor fabrication process. In this process, wafer surfaces are smoothed and planarized using a hybrid removal mechanism, which consists of a chemical reaction and mechanical removal. In this study, the effects of wafer size on the material removal rate (MRR) and its uniformity in the CMP process were investigated using experiments and a mathematical model proposed in our previous research; this model was used to understand the MRR and its uniformity with respect to wafer size. Under constant process conditions, the MRR of a silicon dioxide (SiO2) film increased slightly along with an increase in wafer size. The increase in MRR may be attributed to the acceleration of the chemical reaction due to a rise in process temperature. Based on the results obtained, the k and α values in the mathematical model are useful parameters for understanding the effect of wafer size on the MRR and its distribution under a uniform, relative velocity. These parameters can facilitate the prediction of CMP results and the effective design of a CMP machine.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
H. S. Lee and H. D. Jeong, Chemical and mechanical balance in polishing of electronic materials for defect-free surfaces, CIRP Annals-Manufacturing Technology, 58 (2009) 485–490.
H. Lee, S. Park and H. Jeong, Evaluation of environmental impacts during chemical mechanical polishing (CMP) for sustainable manufacturing, J. of Mechanical Science and Tachnology, 27(2) (2013) 511–518.
D. Castillo-Mejia and S. Beaudoin, A locally relevant Prestonian model for wafer polishing, J. of Electrochemical Society, 150(2) (2003) G96–G102.
H. Kim and H. Jeong, Effect of process conditions on uniformity of velocity and wear distance of pad and wafer during chemical mechanical planarization, J. of Electronic Materials, 33 (2004) 53–60.
H. Hocheng, H. Y. Tsai and M. S. Tsai, Effects of kinematic variables on nonuniformity in chemical mechanical planarization, International J. of Machine Tools and Manufacture, 40 (2004) 1651–1659.
D. Wang, J. Lee, K. Holland, T. Bibby, S. Beaudoin and T. Cale, Von Mises stress in chemical-mechanical polishing processes, J. of Electrochemical Society, 144 (1997) 1121–1127.
K. S. Chen, H. M. Yeh, J. L. Yan and Y. T. Chen, Finiteelement analysis on wafer-level CMP contact stress: reinvestigated issues and the effects of selected process parameters, International J. of Advanced Manufacturing Technology, 42 (2008) 1118–1130.
J. Bae, H. Lee, S. Lee, Y. Guo, J. Park, M. Kinoshita and H. Jeong, Effect of Retainer Pressure on Removal Profile and Stress Distribution in Oxide CMP, Proc. of International Conference on Planarization/CMP Technology, Fukuoka, Japan (2009) 345–349.
H. Lee and H. Jeong, A wafer-scale material removal rate profile model for copper chemical mechanical planarization, International J. of Machine Tools and Manufacture, 51 (2011) 395–403.
H. S. Lee, H. D. Jeong and D. A. Dornfeld, Semi-empirical material removal rate distribution model for SiO2 chemical mechanical polishing (CMP) processes, Precision Engineering, 37 (2013) 483–490.
J. A. Greenwood and J. B. P. Williamson, Contact of normally flat surfaces, Proc. of the Royal Society A, 95 (1966) 300–319.
K. L. Johnson, Contact mechanics, Cambridge, Cambridge University Press (1985).
Y. Zhao and L. Chang, A micro-contact and wear model for chemical-mechanical polishing of silicon wafers, Wear, 252 (2002) 220–226.
Y. Wang, Y. W. Zhao and J. Gu, A new nonlinear-microcontact model for single particle in the chemical-mechanical polishing with soft pad, J. of Material Processing Technology, 183 (2007) 374–379.
J. Z. Jiang, Y. W. Zhao, Y. G. Wang and J. B. Luo, A chemical mechanical polishing model based on the viscous flow of the amorphous layer, Wear, 265 (2008) 992–998.
H. Lee, S. Joo and H. Jeong, Mechanical effect of colloidal silica in copper chemical mechanical planarization, J. of Materials Processing Technology, 209 (2009) 6134–6139.
Author information
Authors and Affiliations
Corresponding author
Additional information
Recommended by Guest Editor Haedo Jeong
Hyunseop Lee received his B.S., M.S., and Ph.D. degrees in Mechanical Engineering from Pusan National University. He is currently a researcher at the School of Mechanical Engineering, Pusan National University, Korea. His studies include (chemical mechanical) polishing of electronic materials and sustainable manufacturing.
Yeongbong Park received his B.S. and M.S. degrees in Mechanical Engineering from Pusan National University, Busan, Korea in 2003 and 2009, respectively. He is currently a Ph.D. student in Mechanical Engineering from the same university. His research interest includes chemical mechanical polishing process of semiconductors.
Sangjik Lee received his B.S. degree in Mechanical Engineering from Pusan National University, Busan, Korea, in 1997. He received his M.S. and Ph.D. degrees in Precision Mechanical Engineering from in the same university in 1999 and in 2010, respectively. He has been a Senior Researcher since 2010. His research interests include ultra-precision machining and systems, process monitoring and simulation, and process integration and optimization.
Haedo Jeong is a professor at the School of Mechanical Engineering at Pusan National University and a CEO of G&P Technology, Korea. He received his B.S. and M.S. degrees from Pusan National University and Korea Advanced Institute of Science and Technology (KAIST), respectively. Then, he received his Ph.D. degree in Mechanical Engineering from Tokyo University, Japan in 1994. His research fields include chemical mechanical polishing (CMP), grinding, polisher and consumable design, and post-CMP cleaning.
Rights and permissions
About this article
Cite this article
Lee, H., Park, Y., Lee, S. et al. Effect of wafer size on material removal rate and its distribution in chemical mechanical polishing of silicon dioxide film. J Mech Sci Technol 27, 2911–2916 (2013). https://doi.org/10.1007/s12206-013-0802-7
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-013-0802-7