Abstract
This investigation is concerned with the topology optimization using displacement-based nonconforming finite elements for problems involving incompressible materials. Although the topology optimization with mixed displacement-pressure elements was performed, a displacement-based approach can be an efficient alternative because it interpolates displacement only. After demonstrating the Poisson locking-free characteristics of the employed nonconforming finite elements by a simple patch test, the developed method is applied to solve the design problems of mounts involving incompressible solid or fluid. The numerical performance of the nonconforming elements in topology optimization was examined also with existing incompressible problems.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
O. Sigmund and P. M. Clausen, Topology optimization using a mixed formulation: an alternative way to solve pressure load problems, Comput. Methods Appl. Mech. Engng. 196 (2007) 1874–1889.
M. Bruggi and P. Venini, Topology optimization of incompressible media using mixed finite elements, Comput. Methods Appl. Mech. Engng. 196 (2007) 3151–3164.
C. Johnson and B. Mercier, Some equilibrium finite elements methods for two dimensional elasticity problems, Numer. Math. 30 (1978) 103–116.
S. Brenner and L. Sung, Linear finite element methods for planar elasticity, Math. Comp. 59 (1992) 321–338.
M. Crouzeix and P. -A. Raviart, Conforming and nonconforming finite element methods for solving the stationary Stokes equations, RAIRO Math. Model. Numer. Anal. 3 (1973) 33–75.
R. Rannacher and S. Turek, Simple nonconforming quadrilateral Stokes element, Numerical Methods for Partial Differential equations 8 (1972) 97–111.
J. Jr. Douglas, J. E. Santos, D. Sheen and X. Ye, Nonconforming Galerkin methods based on quadrilateral elements for second order elliptic problems, RAIRO Math. Model. Numer. Anal. 33(4) (1999) 747–770.
J. Jr. Douglas, J. E. Santos and D. Sheen, A nonconforming mixed finite element methods for Maxwell’s equations, Math. Models Meth. Appl. Sci. 10(4) (2000) 593–613.
J. Jr. Douglas, J. E. Santos and D. Sheen, Nonconforming Galerkin methods for the Helmholtz problem, Numericla Methods for Partial Differential equations 17 (2001) 475–494.
P. M. Gauzellion, J. E. Santos and D. Sheen, Frequency domain wave propagation modeling in exploration seismology, J. Comput. Acoust. 9(3) (2001) 941–955.
C. -O. Lee, J. Lee and D. Sheen, A locking-free nonconforming finite element methods for planar linear elasticity, Advances in Computational Mathematics 19 (2003) 277–291.
G. -W. Jang, J. J. Jeong, Y. Y. Kim, D. Sheen, C. Park and M. Kim, Checkerboard-free topology optimization using nonconforming finite elements, Int. J. Numer. Meth. Engng 57 (2003) 1717–1735.
G. -W. Jang, S. Lee, Y. Y. Kim and D. Sheen, Topology optimization using nonconforming finite elements: three-dimensional case, Int. J. Numer. Meth. Engng 63 (2005) 859–875.
O. C. Zienkiewicz and R. L. Taylor, The Finite Element Method, Volume 1: The Basis, Fifth edition, Butterworth-Heinemann, (2000).
K. J. Bathe, Finite Element Procedures, Prentice-Hall, Inc., (1996).
ANSYS Inc., ANSYS Structural Analysis Guide, (2007).
M. P. Bendsøe and O. Sigmund, Topology Optimization, Theory, Methods and Applications, Springer, (2003).
K. Svanberg, The method of moving asymptotes-a new method for structural optimization, Int. J. Numer. Meth. Engng 24 (1987) 359–373.
W. C. Flower, Understanding hydraulic mounts for improved vehicle noise vibration and ride qualities, SAE Paper No. 850975, (1985).
P. L. Graf and R. Shoureshi, Modeling and implementation of semi-active hydraulic engine mounts, ASME Journal of Dynamic Systems, Measurement, and Control 110 (1988) 422–429.
Author information
Authors and Affiliations
Corresponding author
Additional information
This paper was recommended for publication in revised form by Associate Editor Tae Hee Lee
Gang-Won Jang received his M.S. degree in 2000, and Ph.D. degree in 2004, both from the School of Mechanical and Aerospace Engineering, Seoul National University, Seoul, Korea. He is currently an Assistant Professor at the School of Mechanical and Automotive Engineering, Kunsan National University, Jeonbuk, Korea. His current interest concerns topology optimization of multiphysics problems and thin-walled beam analysis.
Yoon Young Kim received his B.S. and M.S degrees from Seoul National University, Seoul, Korea, and the Ph.D. degree from Stanford University, Palo Alto, CA, in 1989. He has been on the faculty of the School of Mechanical and Aerospace Engineering, Seoul National University, since 1991. He is also the Director of the National Creative Research Initiatives Center for Multiscale Design. His main research field is the optimal design of multiphysics systems, mechanisms, and transducers. He has served as an editor of several Korean and international journals, and as an organizing committee member of several international conferences.
Rights and permissions
About this article
Cite this article
Jang, GW., Kim, Y.Y. Topology optimization with displacement-based nonconforming finite elements for incompressible materials. J Mech Sci Technol 23, 442–451 (2009). https://doi.org/10.1007/s12206-008-1114-1
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-008-1114-1