Abstract
This study presents the pure bending and coupled bending-torsional vibration characteristics of a beam structure which consists of two cantilever beams and a rigid body at their free ends. This structure is available in many mechanical structures such as robots, space constructions, and optical pickup actuators in optical disc drives (ODDs). In order to depict the vibration of the beam structure originating from the deflection and torsion of two beams, the motion equations and continuity conditions are analytically induced by using energy conservation. In the process that the free vibration problem is solved, two independent characteristic equations are obtained. The former is an equation for the pure bending vibration of two beams, and the latter is for their coupled bending-torsional vibration. It is proved that these characteristic equations are exact by comparing natural frequencies obtained from FEM. As natural frequencies are described in many dimensional variations, the relation between vibration characteristics and the dimensions of the given system is also investigated. Finally, resonant frequencies from test results are presented to confirm the validation of this study for a new type optical pickup actuator.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
9. References
M. GURGOZE and H. BATAN, A note on the vibrations of a restrained cantilever beam carrying a heavy tip body, Journal of Sound and Vibration 106 (1986) 533–536.
S. H. FARGHALY, Bending vibration of an axially loaded cantilever beam with an elastically mounted end mass of finite length, Journal of Sound and Vibration 156 (1992) 373–380.
S. K. JANG and C.W. BERT, Free vibration of stepped beams: exact and numerical solutions, Journal of Sound and Vibration 130 (1989) 342–346.
R. E. ROSSI and P.A.A. LAURA, A note on transverse vibrations of a Timoshenko beam of nonuniform thickness clamped at one end and carrying a concentrated mass at the other, Journal of Sound and Vibration 143(3) (1990) 491–502.
N. M. AUCIELLO, Transverse vibrations of a linearly tapered cantilever beam with tip mass of rotary inertia and eccentricity, Journal of Sound and Vibration 194(1) (1996) 25–34.
E. DOKUMACI, An exact solution for coupled bending and torsion vibrations of uniform beams having single cross-sectional symmetry, Journal of Sound and Vibration 119(3) (1987) 443–449.
J. R. BANERJEE, Explicit frequency equation and mode shapes of a cantilever beam coupled in bending and torsion, Journal of Sound and Vibration 224(2) (1999) 267–281.
H. GÖKDAĞ, O. KOPMAZ, Coupled bending and torsional vibration of a beam with in-span and tip attachments, Journal of Sound and Vibration 287 (2005) 591–610.
G. L. ANDERSON, Natural frequencies of two cantilevers joined by a rigid connector at their free ends, Journal of Sound and Vibration 57 (1978) 403–412.
H. D. KWON, Dynamic characteristics of stepped cantilever beams connected with a rigid body, Journal of Sound and Vibration 255 (2002) 701–717.
C. A. Verschuren, F. Zijp, D. M. Bruls, J. I. Lee, J. M. A van den Eerenbeemd, K. Saito, and T. Ishimoto, Cover-layer incident near-field recording: towards 4-layer discs using dynamic tilt control, Proc. Of SPIE, Vol. 6282 (2006) 62820M-1–62820M-10.
T. Ishimoto, S. M. Kim, A. Nakaoki, T. Kondo, Servo technologies in a near-field optical disk drive system, Japanese Journal of Applied Physics, Vol. 47, No. 7 (2008), 5814–5821.
Y. Motegi, M. Nagasato, Y. Ishbashi, H. Someya and N. Kikuiri, Development of tilt servo system using 4-axis lens actuator for disc tilt compensation, ISOM/ODS’99 Technical Digest, SPIE, Vol. 3864, (1999) 20–22.
Nanying He, Weipu Jia, Dingwen Yu, Lei Huang, Mali Gong, A novel type of 3-axis actuator with tilt compensation for high-density optical disc system, Sensors and actuators A 115 (2004) 126–132.
J. M. GERE, Mechanics of Materials, Brooks/Cole Publishing Company, 2000.
Mathematica, software version 5.0.0.0.
L. MEIROVITCH, Elements of vibration analysis, McGraw-Hill, 1986.
B. RAMA BHAT, H. WAGNER, Natural frequencies of a uniform cantilever with a tip mass slender in the axial direction, Journal of Sound and Vibration 45(2) (1976) 304–307.
MATLAB, software version 6.5.0.
R. BHAT, M. A. KULAANI, Natural frequencies for a cantilever with a slender tip mass, American Institute of Aeronautics and Astronautics 14 (1976) 536–537.
Author information
Authors and Affiliations
Corresponding author
Additional information
This paper was recommended for publication in revised form by Associate Editor Eung-Soo Shin
Kyung Taek Lee received a Ph.D. degree in Mechanical Engineering from Yonsei University, Seoul, Korea in 2003. He joined LG Electronics, Seoul, Korea, in 1989, where he has worked on precise mechanical structures and microactuating systems for optical information storage devices, as a Research Engineer. His current interests include microactuators for position control, haptic elements for mobile devices, and etc.
Rights and permissions
About this article
Cite this article
Lee, K.T. Vibration of two cantilever beams clamped at one end and connected by a rigid body at the other. J Mech Sci Technol 23, 358–371 (2009). https://doi.org/10.1007/s12206-008-1008-2
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-008-1008-2