Abstract
Ground vibrations caused by the construction of impact drilling piles may affect adjacent bridges, so corresponding prediction and monitoring are necessary to ensure the safety of bridges. In this study, the construction near an existing long-span double-convex arch bridge is taken as a case study to investigate different layouts of construction machines emanating harmful ground vibrations to the existing adjacent bridge by numerical simulations and monitoring. The peak acceleration and velocity acquired from numerical simulations, and monitoring were successfully used to implement impact drilling pile construction near the existing bridge. The results show that there are good consistencies between the monitoring and numerical simulation results, and the vibration acceleration of the foundation of abutments and piers are mainly derived from the vibration caused by the construction within a distance of 50 m, while the construction beyond 50 m has little effect on the old bridge. The numbers and locations of machines near the same foundation may have a weakening or strengthening effect on the peak acceleration and velocity due to destructive and constructive interference of waves, which can help to control the effects of the vibrations of the existing adjacent bridge.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Ahmed H (2018) Using dynamic analysis of site vibration to select the suitable vibration limit. HBRC Journal 14(2):180–188
Amick H, Gendreau M (2000) Construction vibrations and their impacts on vibration-sensitive facilities. Construction congress VI, February 20–22, Orlando, FL, USA, DOI: https://doi.org/10.1061/40475(278)80
Amick H, Gendreau M, Busch T, Gordon C (2015) Evolving criteria for research facilities: I-vibration. Proceedings of SPIE buildings for nanoscale research and beyond, San Diego, CA, USA
Attewell PB, Selby AR, O’Donnell L (1992) Tables and graphs for the estimation of ground vibration from driven piling operations. Geotechnical & Geological Engineering 10(1):61–85, DOI: https://doi.org/10.1007/BF00881971
Chaudhary MTA (2007) FEM modelling of a large piled raft for settlement control in weak rock. Engineering Structures 29(11):2901–2907, DOI: https://doi.org/10.1016/j.engstruct.2007.02.001
Chaudhary MTA, Fujino Y (2008) System identification of bridges using recorded seismic data and its application in structural health monitoring. Structural Control and Health Monitoring 15(7):1021–1035.
CJJ166–2011 (2011) China code for seismic design of urban bridges. CJJ166-2011, China Architecture & Building Press, Beijing, China (in Chinese)
Crabb GI, Hiller DM (2002) Prediction of groundborne vibration from vibrating rollers. Transport 153(2):131–140, DOI: https://doi.org/10.1680/tran.2002.153.2.131
Dowding CH (1994) Vibration induced settlement from blast densification and pile driving. Proceedings of the conference on vertical and horizontal deformations of foundations and embankments. June 16–18, College Station, TX, USA, 1672–1680
Dowding CH (1996) Construction vibrations. Prentice-Hall, Upper Saddle River, NJ, USA
Elgamal A, Yan L, Yang Z, Conte JP (2008) Three-dimensional seismic response of Humboldt Bay bridge-foundation-ground system. Journal of Structural Engineering 134(7):1165–1176, DOI: https://doi.org/10.1061/(ASCE)0733-9445(2008)134:7(1165)
GB50868–2013 (2013) China building engineering allowable vibration standards. GB50868-2013, China Planning Press, Beijing, China (in Chinese)
Güllü H, Jaf H (2016) Full 3D nonlinear time history analysis of dynamic soil-structure interaction for a historical masonry arch bridge. Environmental Earth Sciences 75(21):1–17, DOI: https://doi.org/10.1007/s12665-016-6230-0
Hope VS, Hiller DM (2000) The prediction of groundborne vibration from percussive piling. Canadian Geotechnical Journal 37(3):700–711, DOI: https://doi.org/10.1139/t99-130
Jia JM (2013) Artificial blasting vibration response test and analysis based on cottage construction of brick structure. Advanced Materials Research 718–720:1895–1901, DOI: https://doi.org/10.4028/www.scientific.net/amr.718-720.1895
Lewis MR, Davie JR (1993) Vibrations due to pile driving. 3rd conference of the international conference on case histories in geotechnical engineering, May 31-June 6, St. Louis, MO, USA
Liu J, Xie H, Xu J, Pei JL (2012) Discussion on deformation and damping parameters of rock under cyclic loading. Chinese Journal of Rock Mechanics and Engineering 31(4):770–777, DOI: https://doi.org/10.3969/j.issn.1000-6915.2012.04.016 (in Chinese)
Midas GTS NX 2014 R1 (2014) Midas GTS NX 2014 R1. MIDAS Information Technology Co., Seoul, Korea
Newmark MS, Zapfe JA, Wood EW (2011) Monitoring construction vibrations at sensitive facilities. Sound & Vibration 45(12):15–17
Ning YS (2016) Impact effect analysis of bridge pile foundation drill. Journal of Guizhou University (Natural Sciences) 33(6):130–135, DOI: https://doi.org/10.15958/j.cnki.gdxbzrb.2016.06.28 (in Chinese)
Olusola AR, Ayodele O, Kayode K (2018) Prediction of structural response to blast-induced vibration in kopek construction quarry, Ikere-Ekiti, Ekiti State, Nigeria. International Journal of Environmental Studies 75(4):1–10
Randall CJ (1989) Absorbing boundary condition for the elastic wave equation. Geophysics 54(5):611, DOI: https://doi.org/10.1190/1.1442496
Sambuelli L (2009) Theoretical derivation of a peak particle velocity-distance law for the prediction of vibrations from blasting. Rock Mechanics and Rock Engineering 42:547–556, DOI: https://doi.org/10.1007/s00603-008-0014-0
Siskind DE, Stagg MS, Kopp JW, Dowding CH (1980) Structure response and damage produced by ground vibrations from surface blasting. RI 8507, U.S. Bureau of Mines, Washington, DC, USA
Stolarik M, Pinka M, Nedoma J (2019) Ground-borne vibration due to construction works with respect to brownfield areas. Applied Sciences 9(18):3766, DOI: https://doi.org/10.3390/app9183766
Sun HF, Jing LP, Meng XC (2011) Selection of artificial boundary condition on soil-structure dynamic interaction. Key Engineering Materials 450:498–501, DOI: https://doi.org/10.4028/www.scientific.net/KEM.450.498
Svinkin MR (1999) Prediction and calculation of construction vibrations. 24th annual member’s conference of the deep foundations institute, October 14–16, Dearborn, MI, USA
Svinkin MR (2002) Predicting soil and structure vibrations from impact machines. Journal of Geotechnical & Geoenvironmental Engineering 128(7):602–612, DOI: https://doi.org/10.1061/(ASCE)1090-0241(2002)128:7(602)
Svinkin MR (2005) Closure to “minimizing construction vibration effects”, by Mark R. Svinkin. Practice Periodical on Structural Design and Construction 10(3):202–204, DOI: https://doi.org/10.1061/(ASCE)1084-0680(2005)10:3(202)
Svinkin MR (2012) Instrumentation of construction vibrations. Ninth international conference on piling and deep foundations, June 3–5, Nice, France
Svinkin MR, Shaw AG, Williams D (2000) Vibration environmental effect of construction operations. DFI 25th annual meeting and 8th international conference and exhibition, 483–491
Taskari O, Sextos AG, Kappos AJ (2008) 3D finite element modeling of a highway bridge considering the effect of soil and foundation. 6th GRACM international congress on computational mechanics, June 19–21, Thessaloniki, Greece
Tripathy GR, Gupta ID (2002) Prediction of ground vibrations due to construction blasts in different types of rock. Rock Mechanics & Rock Engineering 35(3):195–204, DOI: https://doi.org/10.1007/s00603-001-0022-9
Ungar EE, Sturz DH, Amick CH (1999) Vibration control design of high-technology facilities. Sound and Vibration 24(7):20–27
Ungar EE, Zapfe JA (2011) Limiting effects of construction vibrations on sensitive equipment. Practice Periodical on Structural Design and Construction 16(4):199–203, DOI: https://doi.org/10.1061/(ASCE)SC.1943-5576.0000090
Wang T, Huang J, Lang Q, Liu L(2021) Resonance features of rock slope with anti-dip weak interlayer under seismic actions. Arabian Journal of Geosciences 14(4), DOI: https://doi.org/10.1007/s12517-021-06624-3
Wang S, Zhu S (2021) Impact source localization and vibration intensity prediction on construction sites. Measurement 175(3):109148, DOI: https://doi.org/10.1016/j.measurement.2021.109148
Wolf JP (1989) Soil-structure-interaction analysis in time domain. Nuclear Engineering and Design 111(3):381–393
Woods RD (1997) Dynamic effects of pile installation on adjacent structures. Synthesis of Highway Practice 253, National Academy Press, Washington DC, USA
Zhu ZD, Sun LZ, Wang MY (2010) Damping ratio experiment and mesomechanical analysis of deformation failure mechanism on rock under different frequency cyclic loadings. Rock and Soil Mechanics 31:8–12 (in Chinese)
Acknowledgments
This research was supported by the National Natural Science Foundation of China (No. 51878277, 52068022), and the Youth Science Foundation of Education Department of Jiangxi Province (No. GJJ190341). The authors would kindly like to thank all the collaborators and engineers working in the South River Bridge, whose contribution played a key role in the construction of the impact drilling piles adjacent to the older bridge.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Liang, Yx., Feng, Qs., Fu, Mz. et al. Prediction and Monitoring of the Construction Vibration Effect on an Adjacent Old Long Span Double-Convex Arch Bridge. KSCE J Civ Eng 26, 2183–2201 (2022). https://doi.org/10.1007/s12205-022-2170-2
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-022-2170-2