Abstract
Triaxial test is approved to be the most suitable method for studying the mechanical properties of rocks and soils in lab. Through conventional triaxial tests, parameters like the strength of rocks and soils can be obtained, thus providing guidance for the design and construction of geotechnical engineering. With the development of geotechnical engineering, more and more new problems that can hardly be solved by conventional triaxial tests have arisen, which can be classified into two categories: one is the mechanical properties of special soils (rocks), and the other is the mechanical properties of the soils (rocks) under special conditions like geologic hazards and multi-field coupling. The paper introduced several new types of triaxial instruments and test techniques developed in response to the problems, and prospects have been made for further study of triaxial tests, which may provide reference for the optimization of triaxial tests.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Abuel-Naga HM, Bergado DT, Lim BF (2007) Effect of temperature on shear strength and yielding behavior of soft Bangkok clay. Soils and Foundations 47(3):423–436, DOI: https://doi.org/10.3208/sandf.47.423
Alonso EE, Romero EE, Ortega E (2016) Yielding of rockfill in relative humidity-controlled triaxial experiments. Acta Geotechnica 11:455–477, DOI: https://doi.org/10.1007/s11440-016-0437-9
Arai C, Hosaka S, Murase K, Sano Y (1976) Measurements of the relative humidity of saturated aqueous salt solutions. Journal of Chemical Engineering of Japan 9(4):328–330, DOI: https://doi.org/10.1252/jcej.9.328
Bell JM (1965) Stress-strain characteristics of cohesionless granular materials subjected to statically applied homogeneous loads in an open system. PhD Thesis, California Institute of Technology, California, USA
Bruyn DD, Thimus JF (1996) The influence of temperature on mechanical characteristics of Boom clay: The results of an initial laboratory programme. Engineering Geology 41:117–126, DOI: https://doi.org/10.1016/0013-7952(95)00029-1
Burud N, Kishen JC (2020) Damage detection using wavelet entropy of acoustic emission waveforms in concrete under flexure. Structural Health Monitoring, DOI: https://doi.org/10.1177/1475921720957096
Cabalar AF, Clayton C (2016) Effect of temperature on triaxial behavior of a sand with disaccharide. Periodica Polytechnica Civil Engineering 60(4):603–609, DOI: https://doi.org/10.3311/PPci.8631
Cai GQ, Zhao CG, Li J, Liu Y (2014) A new triaxial apparatus for testing soil water retention curves of unsaturated soils under different temperatures. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering) 15(5):364–373, DOI: https://doi.org/10.1631/jzus.A1300358
Chen CH, Chen SS, Mei SA, Tang Y, Li YH (2021b) A large-scale true triaxial seepage apparatus for evaluating impact under high stress state and high hydraulic heads. Geotechnical Testing Journal 44(6):1617–1634, DOI: https://doi.org/10.1520/GTJ20200070
Chen JF, Gu ZA, Rajesh S, Yu SB (2021a) Pullout behavior of triaxial geogrid embedded in a transparent soil. International Journal of Geomechanics 21(3):04021003, DOI: https://doi.org/10.1061/(ASCE)GM.1943-5622.0001936
Chen Z, Narayan SP, Yang Z, Rahman SS (2000) An experimental investigation of hydraulic behaviour of fractures and joints in granitic rock. International Journal of Rock Mechanics & Mining Sciences 37:1061–1071, DOI: https://doi.org/10.1016/S1365-1609(00)00039-3
Chen ZY, Su GS, Ju JW, Jiang JQ (2019) Experimental study on energy dissipation of fragments during rockburst. Bulletin of Engineering Geology and the Environment 78(7):5369–5386, DOI: https://doi.org/10.1007/s10064-019-01463-9
Choi C, Arduino P, Harney MD (2008) Development of a true triaxial apparatus for sands and gravels. Geotechnical Testing Journal 31(1): 32–44, DOI: https://doi.org/10.1520/GTJ100217
Choi JH, Dai S, Lin JS, Seol YK (2018) Multistage triaxial tests on laboratory-formed methane hydrate-bearing sediments. Journal of Geophysical Research: Solid Earth 123:3347–3357, DOI: https://doi.org/10.1029/2018JB015525
Colombo IS, Main IG, Forde MC (2003) Assessing damage of reinforced concrete beam using “b-value” analysis of acoustic emission signals. Journal of Materials in Civil Engineering 15(3):280–286, DOI: https://doi.org/10.1061/(ASCE)0899-1561(2003)15:3(280)
Cui YJ, Delage P (1996) Yielding and plastic behaviour of an unsaturated compacted silt. Géotechnique 46(2):291–311, DOI: https://doi.org/10.1680/geot.1996.46.2.291
Davies JT, Rideal EK (1963) Interfacial phenomena (second edition). Academic Press, Inc., New York, NY, USA, DOI: https://doi.org/10.1016/B978-0-12-206056-4.X5001-2
Demars KR (1982) Soil volume changes induced by temperature cycling. Canadian Geotechnical Journal 19:188–194, DOI: https://doi.org/10.1139/t82-021
Derksen J, Ziegler M, Fuentes R (2021) Geogrid-soil interaction: A new conceptual model and testing apparatus. Geotextiles and Geomembranes 49(5):1393–1406, DOI: https://doi.org/10.1016/j.geotexmem.2021.05.011
Desrues J, Chambon R, Mokni M, Mazerolle F (1996) Void ratio evolution inside shear bands in triaxial sand specimens studied by computed tomography. Géotechnique 46(3):529–546, DOI: https://doi.org/10.1680/geot.1996.46.3.529
Dihoru L, Wood DM, Sadek T, Lings M (2005) A neural network for error prediction in a true triaxial apparatus with flexible boundaries. Computers and Geotechnics 32:59–71, DOI: https://doi.org/10.1016/j.compgeo.2005.01.003
Dong L, Li YL, Liao HL, Liu CL, Chen Q, Hu GW, Liu LL, Meng QG (2020) Strength estimation for hydrate-bearing sediments based on triaxial shearing tests. Journal of Petroleum Science and Engineering 184:106478, DOI: https://doi.org/10.1016/j.petrol.2019.106478
Dong XH, Yang GS, Liu S (2022) Experimental study on AE response and damage evolution characteristics of frozen sandstone under uniaxial compression. Cold Regions Science and Technology 193: 103424, DOI: https://doi.org/10.1016/j.coldregions.2021.103424
Du H, Song DQ, Chen Z, Guo ZZ (2020) Experimental study of the influence of structural planes on the mechanical properties of sandstone specimens under cyclic dynamic disturbance. Energy Science & Engineering 1–21, DOI: https://doi.org/10.1002/ese3.794
Du YT, Li TC, Li WT, Ren YD, Wang G, He P (2020) Experimental study of mechanical and permeability behaviors during the failure of sandstone containing two preexisting fissures under triaxial compression. Rock Mechanics and Rock Engineering 53:3673–3697, DOI: https://doi.org/10.1007/s00603-020-02119-x
Duffaut P (2013) The traps behind the failure of Malpasset arch dam, France, in 1959. Journal of Rock Mechanics and Geotechnical Engineering 5:335–341, DOI: https://doi.org/10.1016/j.jrmge.2013.07.004
Ezzein FM, Bathurst RJ (2014) A new approach to evaluate soil-geosynthetic interaction using a novel pullout test apparatus and transparent granular soil. Geotextiles and Geomembranes 42:246–255, DOI: https://doi.org/10.1016/j.geotexmem.2014.04.003
Fang W (2013) Gross error elimination and index determination of shearing strength parameters in triaxial test. Applied Mechanics and Materials 353–356:152–158, DOI: https://doi.org/10.4028/www.scientific.net/AMM.353-356.152
Farnam Y, Geiker MR, Bentz D, Weiss J (2015) Acoustic emission waveform characterization of crack origin and mode in fractured and ASR damaged concrete. Cement & Concrete Composites 60:135–145, DOI: https://doi.org/10.1016/j.cemconcomp.2015.04.008
Feng P, Dai F, Liu Y, Xu NW, Fan PX (2018) Effects of coupled static and dynamic strain rates on mechanical behaviors of rock-like specimens containing pre-existing fissures under uniaxial compression. Canadian Geotechnical Journal 55:640–652, DOI: https://doi.org/10.1139/cgj-2017-0286
Feng XT, Zhang JY, Yang CX, Tian J, Lin F, Li SP, Su XX (2021) A novel true triaxial test system for microwave-induced fracturing of hard rocks. Journal of Rock Mechanics and Geotechnical Engineering 13:961–971, DOI: https://doi.org/10.1016/j.jrmge.2021.03.008
Frash LP, Carey JW, Zhou L, Rougier E, Ickes T, Viswanathan HS (2016) High-stress triaxial direct-shear fracturing of Utica shale and in situ X-ray microtomography with permeability measurement. Journal of Geophysical Research: Solid Earth 121(7):5493–5508, DOI: https://doi.org/10.1002/2016JB012850
Fredlund DG, Rahardjo H (1993) Soil Mechanics for unsaturated soils. John Wiley & Sons, Inc., New York, NY, USA, DOI: https://doi.org/10.1002/9780470172759
Gao L, Gao F, Xing Y, Zhang ZZ (2020) An energy preservation index for evaluating the rockburst potential based on energy evolution. Energies 13:3636, DOI: https://doi.org/10.3390/en13143636
Garga VK, Zhang H (1997) Volume changes in undrained triaxial tests on sands. Canadian Geotechnical Journal 34:762–772, DOI: https://doi.org/10.1139/t97-038
Goh SG, Rahardjo H, Leong EC (2015) Modification of triaxial apparatus for permeability measurement of unsaturated soils. Soils and Foundations 55(1):63–73, DOI: https://doi.org/10.1016/j.sandf.2014.12.005
Green GE (1969) Strength and compressibility of granular materials under generalized strain conditions. PhD Thesis, University of London, London, UK
Hambly EC (1969) A new true triaxial apparatus. Géotechnique 19(2): 307–309, DOI: https://doi.org/10.1680/geot.1969.19.2.307
Han QH, Yang G, Xu J, Fu ZW, Lacidogna G, Carpinteri A (2019) Acoustic emission data analyses based on crumb rubber concrete beam bending tests. Engineering Fracture Mechanics 210:189–202, DOI: https://doi.org/10.1016/j.engfracmech.2018.05.016
He MC, Liu DQ, Gong WL, Wang CC, Kong J, Du S, Zhang K (2014) Development of a testing system for impact rockbursts. Chinese Journal of Rock Mechanics and Engineering 33(9):1729–1739, DOI: https://doi.org/10.13722/j.cnki.jrme.2014.09.001 (in Chinese)
Hird CC, Ni Q, Guymer I (2011) Physical modelling of deformations around piling augers in clay. Géotechnique 61(11):993–999, DOI: https://doi.org/10.1680/geot.9.T.028
Hoyos LR, Macari EJ (2001) Development of a stress/suction-controlled true triaxial testing device for unsaturated soils. Geotechnical Testing Journal 24(1):5–13, DOI: https://doi.org/10.1520/GTJ11277J
Hoyos LR, Pérez-Ruiz DD, Puppala AJ (2012) Refined true triaxial apparatus for testing unsaturated soils under suction-controlled stress paths. International Journal of Geomechanics 12(3):281–291, DOI: https://doi.org/10.1061/(ASCE)GM.1943-5622.0000138
Hyodo M, Li YH, Yoneda J, Nakata Y, Yoshimoto N, Nishimura A, Song YC (2013) Mechanical behavior of gas-saturated methane hydrate-bearing sediments. Journal of Geophysical Research: Solid Earth 118:5185–5194, DOI: https://doi.org/10.1002/2013JB010233
Ibsen LB, Praastrup U (2002) The danish rigid boundary true triaxial apparatus for soil testing. Geotechnical Testing Journal 25(3):254–265, DOI: https://doi.org/10.1520/GTJ11096J
Indraratna B, Ranjith PG (2001) Laboratory measurement of two-phase flow parameters in rock joints based on high pressure triaxial testing. Journal of Geotechnical and Geoenvironmental Engineering 127(6): 530–542, DOI: https://doi.org/10.1061/(ASCE)1090-0241(2001)127:6(530)
Indraratna B, Ranjith PG, Price JR, Gale W (2003) Two-phase (Air and Water) flow through rock joints: Analytical and experimental study. Journal of Geotechnical and Geoenvironmental Engineering 129(10): 918–928, DOI: https://doi.org/10.1061/(ASCE)1090-0241(2003)129:10(918)
Ishikawa T, Zhang Y, Tokoro T, Miura S (2014) Medium-size triaxial apparatus for unsaturated granular subbase course materials. Soils and Foundations 54(1):67–80, DOI: https://doi.org/10.1016/j.sandf.2013.12.007
Iskander M (2010) Modelling with transparent soils. Springer-Verlag, Berlin Heidelberg, Germany, DOI: https://doi.org/10.1007/978-3-642-02501-3
Ismail MA, Sharma SS, Fahey MT (2005) A small true triaxial apparatus with wave velocity measurement. Geotechnical Testing Journal 28(2):113–122, DOI: https://doi.org/10.1520/GTJ12648
Jiang CB, Liu XD, Wang WS, Wei WH, Duan MK (2021) Three-dimensional visualization of the evolution of pores and fractures in reservoir rocks under triaxial stress. Powder Technology 378:585–592, DOI: https://doi.org/10.1016/j.powtec.2020.10.013
Kjellman W (1936) Report on an apparatus for consummate investigation of the mechanical properties of soils. Proceedings of the 1st international conference on soil mechanics and foundation engineering, June 22, Cambridge, UK, 16–20 16–20
Kong GQ, Zhou LD, Wang ZT, Yang G, Li H (2016) Shear modulus and damping ratios of transparent soil manufactured by fused quartz. Materials Letters 182:257–259, DOI: https://doi.org/10.1016/j.matlet.2016.07.012
Koyama T, Li B, Jiang YJ, Jing LR (2008) Coupled shear-flow tests for rock fractures with visualization of the fluid flow and their numerical simulations. International Journal of Geotechnical Engineering 2:215–227, DOI: https://doi.org/10.3328/IJGE.2008.02.03.215-227
Kuntiwattanakul P, Towhata I, Ohishi K, Seko I (1995) Temperature effects on undrained shear characteristics of clay. Soils and Foundations 35:147–162, DOI: https://doi.org/10.3208/sandf1972.35.147
Lee B, Rathnaweera TD (2016) Stress threshold identification of progressive fracturing in Bukit Timah granite under uniaxial and triaxial stress conditions. Geomechanics and Geophysics for Geo-Energy and Geo-Resources 2:301–330, DOI: https://doi.org/10.1007/s40948-016-0037-z
Lefebvre G, LeBoeuf D (1987) Rate effects and cyclic loading of sensitive clays. Journal of Geotechnical Engineering 113(5):476–489, DOI: https://doi.org/10.1061/(ASCE)0733-9410(1987)113:5(476)
Leroueil S, Tavenas F, La Rochelle P, Tremblay M (1988) Influence of filter paper and leakage on triaxial testing. Proceedings of symposium on advanced triaxial testing of soil and rock, January 1, Louisville, KY, USA, DOI: https://doi.org/10.1520/STP29078S
Lewin PI (1971) Use of servo mechanisms for volume change measurement and k0 consolidation. Géotechnique 21(3):259–262, DOI: https://doi.org/10.1680/geot.1971.21.3.259
Li B, Jiang YJ, Koyama T, Jing LR, Tanabashi Y (2008) Experimental study of the hydro-mechanical behavior of rock joints using a parallel-plate model containing contact areas and artificial fractures. International Journal of Rock Mechanics & Mining Sciences 45:362–375, DOI: https://doi.org/10.1016/j.ijrmms.2007.06.004
Li CH, Kong GQ, Zhang XR, Liu HL, Wang LH (2021c) Thermomechanical properties of sand-structure interface using temperature-controlled triaxial instrument. Canadian Geotechnical Journal 58:248–260, DOI: https://doi.org/10.1139/cgj-2020-0026
Li DL, Wang Z, Liang DQ, Wu XP (2019a) Effect of clay content on the mechanical properties of hydrate-bearing sediments during hydrate production via depressurization. Energies 12:2684, DOI: https://doi.org/10.3390/en12142684
Li DS, Chen Z, Feng QM, Wang YL (2015) Damage analysis of CFRP-confined circular concrete-filled steel tubular columns by acoustic emission techniques. Smart Materials and Structures 24:085017, DOI: https://doi.org/10.1088/0964-1726/24/8/085017
Li DY, Xiao P, Han ZY, Zhu QQ (2020a) Mechanical and failure properties of rocks with a cavity under coupled static and dynamic loads. Engineering Fracture Mechanics 225:106195, DOI: https://doi.org/10.1016/j.engfracmech.2018.10.021
Li J, Wang Y, Kong LW, Wang MY, Cheng P, Ma YZ (2018) Development and preliminary application of a new temperature-controlled triaxial test system for unsaturated soils. Chinese Journal of Geotechnical Engineering 40(3):468–474, DOI: https://doi.org/10.11779/CJGE201803010 (in Chinese)
Li JJ, Huang J, Niu JG, Wan CJ (2019c) Mesoscopic study on axial compressive damage of steel fiber reinforced lightweight aggregate concrete. Construction and Building Materials 196:14–25, DOI: https://doi.org/10.1016/j.conbuildmat.2018.11.135
Li K, Liu RM, Kong L, Zhao XB (2019b) Modeling the mechanical behavior of gas hydrate bearing sediments based on unified hardening framework. Geotechnical and Geological Engineering 37:2893–2902, DOI: https://doi.org/10.1007/s10706-019-00804-5
Li L, Li P, Cai Y, Lu Y (2021a) Visualization of non-uniform soil deformation during triaxial testing. Acta Geotechnica 16:3439–3454, DOI: https://doi.org/10.1007/s11440-021-01310-w
Li L, Zhang X (2019) Factors influencing the accuracy of the photogrammetry-based deformation measurement method. Acta Geotechnica 14: 559–574, DOI: https://doi.org/10.1007/s11440-018-0663-4
Li L, Zhang X, Chen G, Lytton R (2016) Measuring unsaturated soil deformations during triaxial testing using a photogrammetry-based method. Canadian Geotechnical Journal 53:472–489, DOI: https://doi.org/10.1139/cgj-2015-0038
Li SC, Gao CL, Zhou ZQ, Li LP, Wang MX, Yuan YC, Wang J (2019d) Analysis on the precursor information of water inrush in karst tunnels: A true triaxial model test study. Rock Mechanics and Rock Engineering 52:373–384, DOI: https://doi.org/10.1007/s00603-018-1582-2
Li YH, Yang S, Tang XJ, Ding YF, Zhang Q (2020b) Experimental investigation of the deformation and failure behavior of a tunnel excavated in mixed strata using transparent soft rock. KSCE Journal of Civil Engineering 24(3):962–974, DOI: https://doi.org/10.1007/s12205-020-0072-8
Li YY, Cui HQ, Zhang P, Wang DK, Wei JP (2020c) Three-dimensional visualization and quantitative characterization of coal fracture dynamic evolution under uniaxial and triaxial compression based on μCT scanning. Fuel 262:116568, DOI: https://doi.org/10.1016/j.fuel.2019.116568
Li YZ, Zhou H, Liu HL, Ding XM, Zhang WG (2021b) Geotechnical properties of 3D-printed transparent granular soil. Acta Geotechnica 16:1789–1800, DOI: https://doi.org/10.1007/s11440-020-01111-7
Lin W, Liu A, Mao W, Koseki J (2020) Acoustic emission behavior of granular soils with various ground conditions in drained triaxial compression tests. Soils and Foundations 60:929–943, DOI: https://doi.org/10.1016/j.sandf.2020.06.002
Liu C, Tang XW, Wei HW, Wang PP, Zhao HH (2020) Model tests of jacked-pile penetration into sand using transparent soil and incremental particle image velocimetry. KSCE Journal of Civil Engineering 24(4):1128–1145, DOI: https://doi.org/10.1007/s12205-020-1643-4
Liu J, Liu XR, He C, Zhang KS, Wu ZS, Zeng B (2019) Analysis on the triaxial loading mechanical properties of sandstone under high stress and high hydraulic pressure. Journal of Engineering Science and Technology Review 12(4):113–121, DOI: https://doi.org/10.25103/jestr.124.14
Liu Q, Wang X, Song XD (2013) Study on test of the influence of moisture content on creep property of sandy slate coarse-grained soil. Applied Mechanics and Materials 405–408:1733–1738, DOI: https://doi.org/10.4028/www.scientific.net/AMM.405-408.1733
Liu YR, Tang HM (2008) Rock mechanics. Chemical Industry Press, Beijing, China
Lu N, Likos WJ (2004) Unsaturated soil mechanics. John Wiley & Sons, Hoboken, NJ, USA
Lv ZX, Ji QQ, Ren WJ (2020) Experimental study and percolation analysis on seepage characteristics of fractured coal and sandstone based on real-time Micro-CT. Geofluids 2020:8832946, DOI: https://doi.org/10.1155/2020/8832946
Mao HY, Liu SH, Shen CM, Wang LJ, Chu WT (2021) Development and application of a temperature-humidity controlled large triaxial apparatus for coarse granular materials. Chinese Journal of Rock Mechanics and Engineering 40:1–9, DOI: https://doi.org/10.13722/j.cnki.jrme.2020.0945 (in Chinese)
Matsuoka H, Sun D, Kogane A, Fukuzawa N, Ichihara W (2002) Stressstrain behaviour of unsaturated soil in true triaxial tests. Canadian Geotechnical Journal 39:608–619, DOI: https://doi.org/10.1139/T02-031
Meng FB, Huang J, Xiao P, Pang D, Jing HH (2020) Application of regional energy criterion in the prevention and control of coal mine rockburst. IOP Conference Series: Earth and Environmental Science 546:052017, DOI: https://doi.org/10.1088/1755-1315/546/5/052017
Miyazaki K, Masui A, Sakamoto Y, Aoki K, Tenma N, Yamaguchi T (2011) Triaxial compressive properties of artificial methane-hydrate-bearing sediment. Journal of Geophysical Research 116:B06102, DOI: https://doi.org/10.1029/2010JB008049
Nakashima K, Nakata Y, Hyodo M, Yoshimoto N, Hiraoka S, Kajiyama S (2021) Compressive characteristics of methane hydrate-bearing sands under isotropic consolidation. Soils and Foundations 61:506–519, DOI: https://doi.org/10.1016/j.sandf.2021.01.011
Ng CWW, Zhou C (2014) Cyclic behaviour of an unsaturated silt at various suctions and temperatures. Géotechnique 64:709–720, DOI: https://doi.org/10.1680/geot.14.P.015
Ng CWW, Zhan LT, Cui YJ (2002) A new simple system for measuring volume changes in unsaturated soils. Canadian Geotechnical Journal 39:757–764, DOI: https://doi.org/10.1139/T02-015
Ni Q, Hird CC, Guymer I (2010) Physical modelling of pile penetration in clay using transparent soil and particle image velocimetry. Géotechnique 60(2):121–132, DOI: https://doi.org/10.1680/geot.8.P.052
Nie RS, Sun BL, Leng WM, Li YF, Ruan B (2021) Resilient modulus of coarse-grained subgrade soil for heavy-haul railway: An experimental study. Soil Dynamics and Earthquake Engineering 150:106959, DOI: https://doi.org/10.1016/j.soildyn.2021.106959
Ohtsu M, Isoda T, Tomoda Y (2007) Acoustic emission techniques standardized for concrete structures. Journal of Acoustic Emission 25:21–32
Ohtsu M, Shigeishi M, Iwase H, Koyanagi W (1991) Determination of crack location, type and orientation in concrete structures by acoustic emission. Magazine of Concrete Research 43(155):127–134, DOI: https://doi.org/10.1680/macr.1991.43.155.127
Oldecop LA, Alonso EE (2001) A model for rockfill compressibility. Géotechnique 51:127–139, DOI: https://doi.org/10.1680/geot.2001.51.2.127
Oldecop LA, Alonso EE (2003) Suction effects on rockfill compressibility. Géotechnique 53:289–292, DOI: https://doi.org/10.1680/geot.2003.53.2.289
Oldecop LA, Alonso EE (2007) Theoretical investigation of the time-dependent behaviour of rockfill. Géotechnique 57:289–301, DOI: https://doi.org/10.1680/geot.2007.57.3.289
Otani J, Mukunoki T, Obara Y (2002) Characterization of failure in sand under triaxial compression using an industrial X-ray CT scanner. International Journal of Physical Modelling in Geotechnics 2(1): 15–22, DOI: https://doi.org/10.1680/ijpmg.2002.020102
Pei F, Ji HG, Zhao JW, Geng JM (2020) Energy evolution and AE failure precursory characteristics of rocks with different rockburst proneness. Advances in Civil Engineering 2020:8877901, DOI: https://doi.org/10.1155/2020/8877901
Priest JA, Druce M, Roberts J, Schultheiss P, Nakatsuka Y, Suzuki K (2015) PCATS Triaxial: A new geotechnical apparatus for characterizing pressure cores from the Nankai Trough, Japan. Marine and Petroleum Geology 66:460–470, DOI: https://doi.org/10.1016/j.marpetgeo.2014.12.005
Raghunandan ME, Sharma JS, Pradhan B (2015) A review on the effect of rubber membrane in triaxial tests. Arabian Journal of Geosciences 8: 3195–3206, DOI: https://doi.org/10.1007/s12517-014-1420-0
Rampino C, Mancusso C, Vinale F (1999) Laboratory testing on an unsaturated soil: Equipment, procedures, and first experimental results. Canadian Geotechnical Journal 36:1–12, DOI: https://doi.org/10.1139/t98-093
Ranjith PG, Perera MSA (2011) A new triaxial apparatus to study the mechanical and fluid flow aspects of carbon dioxide sequestration in geological formations. Fuel 90:2751–2759, DOI: https://doi.org/10.1016/j.fuel.2011.04.004
Rechenmacher AL (2006) Grain-scale processes governing shear band initiation and evolution in sands. Journal of the Mechanics and Physics of Solids 54:22–45, DOI: https://doi.org/10.1016/j.jmps.2005.08.009
Rezaee R, Saeedi A, Clennell B (2012) Tight gas sands permeability estimation from mercury injection capillary pressure and nuclear magnetic resonance data. Journal of Petroleum Science and Engineering 88–89:92–99, DOI: https://doi.org/10.1016/j.petrol.2011.12.014
Seol YK, Lei L, Choi JH, Jarvis K, Hill D (2019) Integration of triaxial testing and pore-scale visualization of methane hydrate bearing sediments. Review of Scientific Instruments 90:124504, DOI: https://doi.org/10.1063/1.5125445
Shao S, Wang Q, Luo A, Shao S (2017) True triaxial apparatus with rigid-flexible-flexible boundary and remolded loess testing. Journal of Testing and Evaluation 45(3):808–817, DOI: https://doi.org/10.1520/JTE20150177
Shiotani T, Yuyama S, Li ZW, Ohtsu M (2001) Application of AE improved b-value to quantitative evaluation of fracture process in concrete materials. Journal of Acoustic Emission 19:118–133
Siemens GA, Peters SB, Take WA (2013) Comparison of confined and unconfined infiltration in transparent porous media. Water Resources Research 49:851–863, DOI: https://doi.org/10.1002/wrcr.20101
Sohm J, Gabet T, Hornych P, Piau JM, Benedetto HD (2012) Creep tests on bituminous mixtures and modelling. Road Materials and Pavement Design 13:832–849, DOI: https://doi.org/10.1080/14680629.2012.735795
Song ZH, Hu YX, O’Loughlin C, Randolph MF (2009) Loss in anchor embedment during plate anchor keying in clay. Journal of Geotechnical and Geoenvironmental Engineering 135(10):1475–1485, DOI: https://doi.org/10.1061/(ASCE)GT.1943-5606.0000098
Stanier SA, Hird CC, Black JA (2012) Enhancing accuracy and precision of transparent synthetic soil modelling. International Journal of Physical Modelling in Geotechnics 12(4):162–175, DOI: https://doi.org/10.1680/ijpmg.12.00005
Su GS, Hu LH, Feng XT, Wang JH, Zhang XH (2016) True triaxial experimental study of rockburst process under low frequency cyclic disturbance load combined with static load. Chinese Journal of Rock Mechanics and Engineering 35(7):1309–1322, DOI: https://doi.org/10.13722/j.cnki.jrme.2015.1249 (in Chinese)
Sultan N, Delage P, Cui YJ (2002) Temperature effects on the volume change behaviour of boom clay. Engineering Geology 64:135–145, DOI: https://doi.org/10.1016/S0013-7952(01)00143-0
Sun DA, Huang WX, Yao YP (2008) An experimental study of failure and softening in sand under three-dimensional stress condition. Granular Matter 10(3):187–195, DOI: https://doi.org/10.1007/s10035-008-0083-5
Sun JZ, Liu JY (2014) Visualization of tunnelling-induced ground movement in transparent sand. Tunnelling and Underground Space Technology 40:236–240, DOI: https://doi.org/10.1016/j.tust.2013.10.009
Sun YT, Li GC, Yang S (2021) Rockburst Interpretation by a data-driven approach: A comparative study. Mathematics 9:2965, DOI: https://doi.org/10.3390/math9222965
Uzun F, Korsunsky AM (2019) The height digital image correlation (hDIC) technique for the identification of triaxial surface deformations. International Journal of Mechanical Sciences 159:417–423, DOI: https://doi.org/10.1016/j.ijmecsci.2019.06.014
Voznesensky EA, Funikova VV, Babenko VA (2013) Deformability properties of model granular soils under true triaxial compression conditions. Moscow University Geology Bulletin 68(4):253–259, DOI: https://doi.org/10.3103/S014587521304008X
Wang DK, Zeng FC, Wei JP, Zhang HT, Wu Y, Wei Q (2021b) Quantitative analysis of fracture dynamic evolution in coal subjected to uniaxial and triaxial compression loads based on industrial CT and fractal theory. Journal of Petroleum Science and Engineering 196:108051, DOI: https://doi.org/10.1016/j.petrol.2020.108051
Wang JA, Park HD (2001) Comprehensive prediction of rockburst based on analysis of strain energy in rocks. Tunnelling and Underground Space Technology 16:49–57, DOI: https://doi.org/10.1016/S0886-7798(01)00030-X
Wang L, Sun X, Shen S, Wu P, Liu T, Liu WG, Zhao JF, Li YH (2021a) Undrained triaxial tests on water-saturated methane hydrate-bearing clayey-silty sediments of the South China Sea. Canadian Geotechnical Journal 58:351–366, DOI: https://doi.org/10.1139/cgj-2019-0711
Wang TT, Zhang T, Ranjith PG, Li YW, Song ZL, Wang S, Zhao WC (2020) A new approach to the evaluation of rock mass rupture and brittleness under triaxial stress condition. Journal of Petroleum Science and Engineering 184:106482, DOI: https://doi.org/10.1016/j.petrol.2019.106482
Wang Y (2018) The mechanical characteristics of rockfill materials under true triaxial stress conditions. PhD Thesis, Tsinghua University, Beijing, China
Watanabe Y, Lenoir N, Otani J, Nakai T (2012) Displacement in sand under triaxial compression by tracking soil particles on X-ray CT data. Soils and Foundations 52(2):312–320, DOI: https://doi.org/10.1016/j.sandf.2012.02.008
Wiebe B, Graham J, Tang GX, Dixon D (1998) Influence of pressure, saturation, and temperature on the behaviour of unsaturated sand-bentonite. Canadian Geotechnical Journal 35:194–205, DOI: https://doi.org/10.1139/t97-093
Wood DM (1974) Some aspects of the mechanical behaviour of kaolin under truly triaxial conditions of stress and strain. PhD Thesis, University of Cambridge, Cambridge, UK
Wulfsohn D, Adams BA, Fredlund DG (1998) Triaxial testing of unsaturated agricultural soils. Journal of Agricultural Engineering Research 69(4):317–330, DOI: https://doi.org/10.1006/jaer.1997.0251
Xiong YL, Liu GB, Zheng RY, Bao XH (2018) Study on dynamic undrained mechanical behavior of saturated soft clay considering temperature effect. Soil Dynamics and Earthquake Engineering 115:673–684, DOI: https://doi.org/10.1016/j.soildyn.2018.09.026
Xu J, Niu XL, Ma Q, Han QH (2021) Mechanical properties and damage analysis of rubber cement mortar mixed with ceramic waste aggregate based on acoustic emission monitoring technology. Construction and Building Materials 309:125084, DOI: https://doi.org/10.1016/j.conbuildmat.2021.125084
Xu J, Shu SR, Han QH, Liu C (2018) Experimental research on bond behavior of reinforced recycled aggregate concrete based on the acoustic emission technique. Construction and Building Materials 191:1230–1241, DOI: https://doi.org/10.1016/j.conbuildmat.2018.10.054
Xu Y, Dai F (2018) Dynamic response and failure mechanism of brittle rocks under combined compression-shear loading experiments. Rock Mechanics and Rock Engineering 51:747–764, DOI: https://doi.org/10.1007/s00603-017-1364-2
Yang WM, Wang MX, Zhou ZQ, Li LP, Yuan YC, Gao CL (2019) A true triaxial geomechanical model test apparatus for studying the precursory information of water inrush from impermeable rock mass failure. Tunnelling and Underground Space Technology 93:103078, DOI: https://doi.org/10.1016/j.tust.2019.103078
Yang XR, Weng L, Hu ZX (2018) Damage evolution of rocks under triaxial compressions: An NMR investigation. KSCE Journal of Civil Engineering 22(8):2856–2863, DOI: https://doi.org/10.1007/s12205-017-0766-8
Yao XL, Qi JL, Yu F, Ma L (2013) A versatile triaxial apparatus for frozen soils. Cold Regions Science and Technology 92:48–54, DOI: https://doi.org/10.1016/j.coldregions.2013.04.001
Ye GL, Nishimura T, Zhang F (2015) Experimental study on shear and creep behaviour of green tuff at high temperatures. International Journal of Rock Mechanics & Mining Sciences 79:19–28, DOI: https://doi.org/10.1016/j.ijrmms.2015.08.005
Yin JH, Cheng CM, Kumruzzaman M, Zhou WH (2010) New mixed boundary, true triaxial loading device for testing three-dimensional stress-strain-strength behaviour of geomaterials. Canadian Geotechnical Journal 47:1–15, DOI: https://doi.org/10.1139/T09-075
Yin JH, Zhou WH, Kumruzzaman M, Cheng CM (2011) A rigid-flexible boundary true triaxial apparatus for testing soils in a three-dimensional stress state. Geotechnical Testing Journal 34(3):265–272, DOI: https://doi.org/10.1520/GTJ102886
Yin LM, Guo WJ, Chen JT (2014a) Development of true triaxial rock test system of coupled stress-seepage and its application. Chinese Journal of Rock Mechanics and Engineering 33(supp.1):2820–2826, DOI: https://doi.org/10.13722/j.cnki.jrme.2014.s1.033 (in Chinese)
Yin ZQ, Li XB, Jin JF, He XQ, Du K (2012) Failure characteristics of high stress rock induced by impact disturbance under confining pressure unloading. Transactions of Nonferrous Metals Society of China 22:175–184, DOI: https://doi.org/10.1016/S1003-6326(11)61158-8
Yin ZQ, Ma HF, Hu ZX, Zou Y (2014b) Effect of static-dynamic coupling loading on fracture toughness and failure characteristics in marble. Journal of Engineering Science and Technology Review 7(2):169–174, DOI: https://doi.org/10.25103/jestr.072.25
Yoneda J, Kida M, Konno Y, Jin Y, Morita S, Tenma N (2019) In situ mechanical properties of shallow gas hydrate deposits in the deep seabed. Geophysical Research Letters 46(24):14459–14468, DOI: https://doi.org/10.1029/2019GL084668
Yue Y, Peng S, Liu Y, Xu J (2019) Investigation of acoustic emission response and fracture morphology of rock hydraulic fracturing under true triaxial stress. Acta Geophysica 67:1017–1024, DOI: https://doi.org/10.1007/s11600-019-00299-x
Zhang BY, Zhang JH, Sun GL (2015) Deformation and shear strength of rockfill materials composed of soft siltstones subjected to stress, cyclical drying/wetting and temperature variations. Engineering Geology 190:87–97, DOI: https://doi.org/10.1016/j.enggeo.2015.03.006
Zhang BY, Zhang JH, Sun GL (2014a) Development of a soft-rock weathering test apparatus. Experimental Techniques 38:54–65, DOI: https://doi.org/10.1111/j.1747-1567.2011.00788.x
Zhang X, Mavroulidou M, Gunn MJ, Sutton J, Cabarkapa Z, Kichou Z (2014b) Application of a novel laser sensor volume measurement system to the triaxial testing of an unsaturated lime-treated soil. Acta Geotechnica 9:945–957, DOI: https://doi.org/10.1007/s11440-013-0254-3
Zhang XH, Luo DS, Lu XB, Liu LL, Liu CL (2018) Mechanical properties of gas hydrate-bearing sediments during hydrate dissociation. Acta Mechanica Sinica 34:266–274, DOI: https://doi.org/10.1007/s10409-017-0699-y
Zhang Y, Feng XT, Yang CX, Han Q, Wang ZF, Kong R (2021) Evaluation method of rock brittleness under true triaxial stress states based on pre-peak deformation characteristic and post-peak energy evolution. Rock Mechanics and Rock Engineering 54:1277–1291, DOI: https://doi.org/10.1007/s00603-020-02330-w
Zhang YD, Buscarnera G (2018) Breakage mechanics for granular materials in surface-reactive environments. Journal of the Mechanics and Physics of Solids 112:89–108, DOI: https://doi.org/10.1016/j.jmps.2017.11.008
Zhao Y, Wang CL, Ning L, Zhao HF, Bi J (2022) Pore and fracture development in coal under stress conditions based on nuclear magnetic resonance and fractal theory. Fuel 309:122112, DOI: https://doi.org/10.1016/j.fuel.2021.122112
Zheng F, Shao SJ, Wang J, Shao S (2020) Experimental study on the mechanical behaviour of natural loess based on suction-controlled true triaxial tests. KSCE Journal of Civil Engineering 24(8):2304–2321, DOI: https://doi.org/10.1007/s12205-020-1386-2
Zheng F, Shao SJ, Wang YX, Shao S (2021) A new suction-controlled true triaxial apparatus for unsaturated soil testing. Geotechnical Testing Journal 44(4):833–850, DOI: https://doi.org/10.1520/GTJ20190015
Zhou CY, Lu YQ, Liu Z, Zhang LH (2019) An innovative acousto-optic-sensing-based triaxial testing system for rocks. Rock Mechanics and Rock Engineering 52:3305–3321, DOI: https://doi.org/10.1007/s00603-019-01764-1
Zhou JZ, Wei CF, Wei HZ, Yang ZJ, Li LX, Li YL, Ding GR (2020a) Development and application of multi-functional triaxial test system for hydrate-bearing sediments. Rock and Soil Mechanics 41(1):342–352, DOI: https://doi.org/10.16285/j.rsm.2018.1896 (in Chinese)
Zhou XX, Chi SC, Wang MH, Jia YF (2020b) Study on wetting deformation characteristics of coarse granular materials and its simulation in core-wall rockfill dams. International Journal for Numerical and Analytical Methods in Geomechanics 44(6):851–873, DOI: https://doi.org/10.1002/nag.3042
Zhu BZ, Fan JQ, Shi XY, Liu PF, Guo JQ (2021) Study on rockburst proneness of deep tunnel under different geo-stress conditions based on DEM. Geotechnical and Geological Engineering 13:3636, DOI: https://doi.org/10.1007/s10706-021-01969-8
Zhu J, Deng JH, Huang YM, He ZL (2019) Influence of water on the fracture process of marble with acoustic emission monitoring. KSCE Journal of Civil Engineering 23(7):3239–3249, DOI: https://doi.org/10.1007/s12205-019-0172-5
Zhu JH, Anderson SA (1998) Corrections for triaxial tests on undisturbed soils. Journal of Testing and Evaluation 26(3):277–284, DOI: https://doi.org/10.1520/JTE12002J
Zhu WC, Li ZH, Zhu L, Tang CA (2010) Numerical simulation on rockburst of underground opening triggered by dynamic disturbance. Tunnelling and Underground Space Technology 25(5):587–599, DOI: https://doi.org/10.1016/j.tust.2010.04.004
Acknowledgments
The authors acknowledge the support of the National Natural Science Foundation of China (No.52178342) and Natural Science Foundation of Tianjin City (No.19JCYBJC22200).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Bai, J., Diao, Y., Jia, C. et al. A Review of Advances in Triaxial Tests: Instruments, Test Techniques and Prospects. KSCE J Civ Eng 26, 3325–3341 (2022). https://doi.org/10.1007/s12205-022-1345-1
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-022-1345-1