Abstract
An innovative application of a new corrugated steel plate damper (CSPD) in steel arch bridges is proposed to enhance their seismic performance. The mechanical properties of the CSPD were investigated by static and quasi-static parametric analysis using ABAQUS software, and validation of the CSPD finite element models was conducted by comparing the numerical results with published experimental results. The results indicate that the CSPD has desirable mechanical properties and hysteretic performance when the geometric design parameters lie within a reasonable range. Then a selected CSPD with reasonable geometric design parameters was installed on the side piers of upper-deck type steel truss arch bridge to explore the resulting improvement in the seismic behaviour of the original arch bridge. The displacement and force responses indicate that the selected CSPD can improve energy dissipation and the seismic behaviour of the arch bridge in transverse and longitudinal directions in major earthquakes.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Abbas HH, Sause R, Driver RG (2007a) Analysis of flange transverse bending of corrugated web I-girders under in-plane loads. Journal of Structural Engineering 133(3):347–355, DOI: https://doi.org/10.1061/(ASCE)0733-9445(2007)133:3(347)
Abbas HH, Sause R, Driver RG (2007b) Simplified analysis of flange transverse bending of corrugated web I-girders under in-plane moment and shear. Engineering Structures 29(11):2816–2824, DOI: https://doi.org/10.1016/j.engstruct.2007.01.006
AISC 341-10 (2010) Seismic provisions for structural steel buildings. ANSI/AISC 341-10, Chicago, IL, USA
Anish KA, Chakrabarti A (2019a) Failure mode analysis of laminated composite sandwich plate. Engineering Failure Analysis 104:950–976, DOI: https://doi.org/10.1016/j.engfailanal.2019.06.080
Anish CA, Kumar A, Kwiatkowski B, Barnat-Hunek D, Widomski MK (2019b) Bi-axial buckling of laminated composite plates including cutout and additional mass. Materials 12(11):1750, DOI: https://doi.org/10.3390/ma12111750
Anish CA, Vishwakarma S, Kumar A, Fic S, Barnat-Hunek D (2019c) Transient response of rhombic laminates. Structure Engineering and Mechanics 70(5):551–562, DOI: https://doi.org/10.12989/sem.2019.70.5.551
Ansari MI, Kumar A (2019) Flexural analysis of functionally graded CNT-reinforced doubly curved singly ruled composite truncated cone. Journal of Aerospace Engineering 32(2):04018154, DOI: https://doi.org/10.1061/(asce)as.1943-5525.0000988
Bruneau M (1998) Performance of steel bridges during the 1995 Hyogoken-Nanbu (Kobe, Japan) earthquake — A North American perspective. Engineering Structures 20(12):1063–1078, DOI: https://doi.org/10.1016/s0141-0296(97)00203-4
Chaubey AK, Jha I, Kumar A, Demirbas MD, Dey S (2018b) Dual-axis buckling of laminated composite skew hyperbolic paraboloids with openings. Journal of the Brazilian Society of Mechanical Sciences and Engineering 40(10), DOI: https://doi.org/10.1007/s40430-018-1406-z
Chaubey AK, Prakash C, Kumar A (2018a) Biaxial and shear buckling of laminated composite elliptic paraboloids with cutouts and concentrated mass. Mechanics Research Communications 94:80–87, DOI: https://doi.org/10.1016/j.mechrescom.2018.09.008
Chen ZY, Ge HB, Usami T (2006) Hysteretic model of stiffened shear panel dampers. JSCE Journal of Structural Engineering 132(3):478–483, DOI: https://doi.org/10.1016/B978-008044637-0/50181-5
Chen X, Ge HB, Usami T (2011) Seismic demand of buckling-restrained braces installed in steel arch bridges under repeated earthquakes. Journal of Earthquake and Tsunami 5(2):119–150, DOI: https://doi.org/10.1142/S1793431111000942
CSA (2009) Limit states design of steel structures. CAN/CSA S16-2009, Mississauga, Canada
Deng WQ, Liu D, Xiu YQ, Zhang JD (2019) Experimental study on asynchronous construction for composite bridges with corrugated steel webs. Journal of Constructional Steel Research 157(2019):93–102, DOI: https://doi.org/10.1016/j.jcsr.2019.02.028
Dou C, Pi YL, Gao W (2018) Shear resistance and post-buckling behavior of corrugated panels in steel plate shear walls. Thin-Walled Structures 131(10):816–826, DOI: https://doi.org/10.1016/j.tws.2018.07.039
Du XL, Han Q, Li ZX, Li LY, Chen SF, Zhang JF (2008) The seismic damage of bridges in the 2008 Wenchuan earthquake and lessons from its damage. Journal of Beijing University of Technology 34(12):1270–1279, DOI: https://doi.org/10.11936/bjutxb2008121270
Elkawas AA, Hassanein MF, El-Boghdadi MH (2017) Numerical investigation on the nonlinear shear behavior of high-strength steel tapered corrugated web bridge girders. Engineering Structures 134(2017):358–375, DOI: https://doi.org/10.1016/j.engstruct.2016.12.044
EN 1993-1-5 Eurocode 3 (2005) Design of steel structures, part1 — 5: Plated structural elements. European Committee for Standardization, Brussels, Belgium
Ezzeldin YS (2007) Design aspects of steel I-girders with corrugated steel webs. Electronic Journal of Structural Engineering 7:27–40
Farhad R, Alaeddin B, Mikaeil YF, Arastoo A (2018) Shear buckling analysis of steel flat and corrugated web I-girders. KSCE Journal of Civil Engineering 22(12):5058–5073, DOI: https://doi.org/10.1007/s12205-017-1530-9
Ibrahim SA, El-Dakhakhni WW, Elgaaly M (2006) Behavior of bridge girders with corrugated webs under monotonic and cyclic loading. Engineering Structures 28(14):1941–1955, DOI: https://doi.org/10.1016/j.engstruct.2006.03.026
Ichioka Y, Kono S, Nishiyama Y, Watanabe F (2009) Hybrid system using precast prestressed frame with corrugated steel panel damper. Journal of Advanced Concrete Technology 7(3):297–306, DOI: https://doi.org/10.3151/jact.7.297
Iemura H (2012) Seismic safety enhancement of long span bridges with base isolation and structural control technology. JSCE Journal of Structural Engineering 58A:1–16, DOI: https://doi.org/10.11532/structcivil.58A.1
Jáger B, Dunai L, Kövesdi B (2015) Girders with trapezoidally corrugated webs subjected by combination of bending, shear and path loading. Thin-Walled Structures 96(96):27–239, DOI: https://doi.org/10.1016/j.tws.2015.08.015
Kalali H, Ghazijahani GT, Hajsadeghi M, Zirakian T, Alaee FJ (2016) Numerical study on steel shear walls with sinusoidal corrugated plates. Latin American Journal of Solids and Structures 13(15): 2802–2814, DOI: https://doi.org/10.1590/1679-78252837
Kubo M, Watanabe K (2007) Lateral-torsional buckling capacity of steel girders with corrugated web plates. JSCE Journal of Structural Engineering 63(1):179–193, DOI: https://doi.org/10.2208/jsceja.63.179
Kumar A, Chakrabarti A, Bhargava P (2013) Vibration of laminated composites and sandwich shells based on higher order zigzag theory, Engineering Structures 56:880–888, DOI: https://doi.org/10.1016/j.engstruct.2013.06.014
Li R, Ge HB, Maruyama R (2017) Assessment of post-earthquake serviceability for steel arch bridges with seismic dampers considering main shock-aftershock sequences. Earthquakes and Structures 13(2): 137–150, DOI: https://doi.org/10.12989/eas.2017.13.2.137
Li R, Ge HB, Usami T, Shu GP (2016) A strain-based post-earthquake serviceability verification method for steel frame-typed bridge piers installed with seismic dampers. Journal of Earthquake Engineering 21(4):635–651, DOI: https://doi.org/10.1080/13632469.2016.1157531
Lu Z, Usami T, Ge HB (2004) Seismic performance evaluation of steel arch bridges against major earthquakes. Part 2: Simplified verification procedure. Earthquake Engineering & Structural Dynamics 33(14): 1355–1372, DOI: https://doi.org/10.1002/eqe.407
Machimdamrong C, Watanabe E, Utsunomiya T (2004) Analysis of corrugated steel web girders by an efficient beam bending theory. Structural Engineering/Earthquake Engineering 21(2):131s–142s, DOI: https://doi.org/10.2208/jsceseee.21.131s
Nakashima M (1995) Strain-hardening behavior of shear panels made of low-yield steel I: Test. Journal of Structural Engineering 121(12): 1742–1749, DOI: https://doi.org/10.1061/(ASCE)0733-9445(1995)121:12(1742)
Nakashima M, Akazawa T, Tsuji B (1995) Strain-hardening behavior of shear panels made of low-yield steel. II: Model. Journal of Structural Engineering 121(12):1750–1757, DOI: https://doi.org/10.1061/(ASCE)0733-9445(1995)121:12(1750)
Qiu J, Zhao QH, Yu C, Li ZX (2018) Experimental studies on cyclic behavior of corrugated steel plate shear walls. Journal of Structural Engineering 144(11):04018200, DOI: https://doi.org/10.1061/(ASCE)st.1943-541x.0002165
SIMULIA (2013) ABAQUS standard manual (Version 6.14). The Dassault Systèmes, Realistic Simulation, Providence, RI, USA
Tanaka K, Sasaki Y (2000) Hysteretic performance of shear panel dampers of ultra-low yield-strength steel for seismic response control of buildings. The 12th World Conference on Earthquake Engineering, New Zealand, 1248–1260
Usami T, Lu Z, Ge HB, Takeshi K (2004) Seismic performance evaluation of steel arch bridges against major earthquakes. Part 1: Dynamic analysis approach. Earthquake Engineering & Structural Dynamics 33(14):1337–1354, DOI: https://doi.org/10.1002/eqe.407
Usami T, Zheng Y, Ge HB (2000) Recent research developments in stability and ductility of steel bridge structures: General report. Journal of Constructional Steel Research 55:183–209, DOI: https://doi.org/10.1016/S0143-974X(99)00085-1
Wang KH, Han W, Li Q, Li Y (2012) Philosophies on seismic design of highway bridges of small or medium spans. China Civil Engineering Journal 45(9):115–121, DOI: https://doi.org/10.15951/j.tmgcxb.2012.09.012
Wang SH, Liu YQ, He J, Xin HH, Yan HB (2019) Experimental study on cyclic behavior of composite beam with corrugated steel web considering different shear-span ratio. Engineering Structures 180 (2019):669–684, DOI: https://doi.org/10.1016/j.engstruct.2018.11.044
Watanabe K, Kubo M (2006) In-plane bending capacity of steel girders with corrugated web plates. JSCE Journal of Structural Engineering, JSCE 62(2):323–336, DOI: https://doi.org/10.2208/jsceja.62.323
Xu LY, Tao MX, Nie X, Fan JS, Taciroglu E (2017) Modeling techniques for strain-range dependent hardening behavior of low-yield-point steel shear panel dampers. Journal of Structural Engineering 143(12): 04017172(1–10), DOI: https://doi.org/10.1061/(ASCE)ST.1943-541X.0001896
Yi J, Gil H, Youm K, Lee H (2008) Interactive shear buckling behavior of trapezoidally corrugated steel webs. Engineering Structures 30(6):1659–1666, DOI: https://doi.org/10.1016/j.engstruct.2007.11.009
Zhang CF, Zhang ZS, Shi JF (2012) Development of high deformation capacity low yield strength steel shear panel damper, Journal of Constructional Steel Research 75(7):116–130, DOI: https://doi.org/10.1016/j.jcsr.2012.03.014
Acknowledgements
This study was supported by the Project of the National Science and Technology Ministry 13th Five-Year Science and Technology (2018YFC0809606-03), the supports is gratefully acknowledged.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sui, W., Li, H., Zhang, Q. et al. The Mechanical Properties of a New Corrugated Steel Plate Damper and Its Application in a Steel Arch Bridge. KSCE J Civ Eng 24, 228–240 (2020). https://doi.org/10.1007/s12205-020-0888-2
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-020-0888-2